User manual INFINITI I30 - 1996

FOREWORD Your INFINITI represents a new way of thinking about car design. It integrates advanced engineering and superior craftsmanship with a simple, refined aesthetic sensitivity associated with traditional Japanese culture. The result is a different notion of luxury and beauty. The car itself is important, but so also is the sense of harmony that the car evokes in its driver, and the sense of satisfaction you feel with the INFINITI --from the way it looks and drives to the high level of dealer service. To ensure that you enjoy your INFINITI to the fullest, we encourage you to read this Owner's Manual immediately. It explains all of the features, controls and performance characteristics of your INFINITI; it also provides important instructions and safety information. A separate Warranty booklet is to be found in your Owner's Literature Portfolio. Always carry it with you when you take your INFINITI to an authorized dealer. The portfolio contents provide complete information about all warranties covering this vehicle, the periodic maintenance required to keep the warranties in effect as well as the INFINITI roadside assistance program. INFINITI is dedicated to providing a satisfying ownership experience for as long as you own your car. Should you have any questions regarding your INFINITI or your INFINITI dealer, please contact our Consumer Affairs department at 1-800-662-6200. In Hawaii 808-531-0231. Thank you. READ FIRST -- THEN DRIVE SAFELY Before driving your vehicle, please read your Owner's Manual carefully. This will ensure familiarity with controls and maintenance requirements, assisting you in the safe operation of your vehicle. Throughout this manual we have used the word WARNING. This is used to indicate the presence of a hazard which may cause the possibility of a personal injury or other damage and must be followed precisely. CAUTION. This is also used throughout the manual to indicate the presence of a hazard that could cause possible minor injury to yourself or components and the procedures must be followed carefully. WHEN READING THE MANUAL This manual includes information for all options available on this model. Therefore, you may find some information that does not apply to your vehicle. MODIFICATION OF YOUR VEHICLE This vehicle should not be modified. Modification could affect its performance, safety or durability, and may even violate governmental regulations. In addition, damage or performance problems resulting from modification may not be covered under INFINITI warranties. All information, specifications and illustrations in this manual are those in effect at the time of printing. INFINITI reserves the right to change specifications or design at any time without notice. © 1995 NISSAN MOTOR CO., LTD. TOKYO, JAPAN TABLE OF CONTENTS INSTRUMENTS AND CONTROLS..................................................................... 1-1 PRE-DRIVING CHECKS AND ADJUSTMENTS ................................................. 2-1 HEATER/AIR CONDITIONER/AUDIO SYSTEM ................................................. 3-1 STARTING AND DRIVING ................................................................................. 4-1 IN CASE OF EMERGENCY ............................................................................... 5-1 APPEARANCE AND CARE................................................................................ 6-1 DO-IT-YOURSELF.............................................................................................. 7-1 MAINTENANCE ................................................................................................. 8-1 TECHNICAL AND CONSUMER INFORMATION............................................... 9-1 INDEX .............................................................................................................. 10-1 IMPORTANT SAFETY INFORMATION REMINDERS FOR SAFETY! Follow these five important driving rules to help ensure a safe and comfortable trip for you and your passengers! NEVER drive under the influence of alcohol or drugs. ALWAYS observe posted speed limits and never drive too fast for conditions. ALWAYS use your seat belts and appropriate child restraint systems. ALWAYS provide information about the proper use of vehicle safety features to all occupants of the vehicle. ALWAYS review this Owner's Manual for important safety information. WARNING: This is used to indicate the presence of a hazard which may cause the possibility of a personal injury or other damage. The procedures must be followed precisely. CAUTION: This is used throughout the manual to indicate the presence of a hazard that could cause possible minor injury to yourself or your vehicle. The procedures must be followed carefully. 1 INSTRUMENTS AND CONTROLS Meters and gauges...................................... 1-3 Warning/indicator light and buzzer ............. 1-6 Theft warning .............................................. 1-9 Windshield wiper and washer switch........ 1-11 Rear window and outside mirror defogger switch......................................... 1-12 Headlight and turn signal switch .............. 1-12 Cornering light........................................... 1-13 Instrument brightness control................... 1-14 Front fog light switch ................................ 1-14 Hazard warning flasher switch .................. 1-14 Heated seat................................................ 1-15 Cigarette lighter and ash trays .................. 1-16 Storage tray............................................... 1-16 Cup and card holders................................ Cargo net................................................... Power window........................................... Sun roof .................................................... Clock.......................................................... Interior light............................................... Front personal light ................................... Vanity mirror light ..................................... Trunk light ................................................. Integrated HomelinkTM transmitter (If so equipped)......................................... 1-17 1-17 1-18 1-19 1-20 1-20 1-21 1-22 1-22 1-22 INSTRUMENTS AND CONTROLS See the page indicated in parentheses for operating details. SII0029 1-2 INSTRUMENTS AND CONTROLS METERS AND GAUGES F E SII0030 1-3 INSTRUMENTS AND CONTROLS SPEEDOMETER The speedometer indicates vehicle speed in miles per hour. TACHOMETER The tachometer indicates engine speed in revolutions per minute (r/min). ENGINE COOLANT TEMPERATURE GAUGE The gauge indicates the coolant temperature. SII0031 SII0032 SII0033 ODOMETER The odometer records the total distance the vehicle has been driven. CAUTION: When engine speed approaches the red zone, shift to a higher gear. Engine speed in the red zone may cause serious engine damage. The coolant temperature will vary with the outside air temperature and driving conditions. TRIP ODOMETER The trip odometer records the distance of individual trips. Before each trip, set the trip odometer to zero by pushing the RESET button. 1-4 INSTRUMENTS AND CONTROLS FUEL GAUGE CAUTION: If the gauge indicates over the normal range, stop the vehicle as soon as safely possible. If the engine is overheated, continued operation of the vehicle may seriously damage the engine. See ``In case of emergency'' section for immediate action required. The gauge indicates the APPROXIMATE fuel level in the tank. The indicator light comes on when the fuel tank is getting low. Refuel as soon as it is convenient, preferably before the gauge reaches ``E''. There should be a small reserve of fuel in the tank when the fuel gauge needle reaches ``E''. SII0034 The gauge may move slightly during braking, turning, acceleration, or going up or down hill. The gauge needle is designed to remain in approximately the same position, even when the ignition key is turned ``OFF''. Refill the fuel tank before the gauge registers Empty. 1-5 INSTRUMENTS AND CONTROLS WARNING/INDICATOR LIGHT AND BUZZER or warning light Turn signal/hazard indicator light High beam indicator light (blue) Charge warning light Door open warning light or Seat belt warning light Low washer fluid warning light Anti-lock brake warning light Overdrive off indicator light Malfunction indicator light Engine oil pressure warning light CRUISE indicator light Air bag warning light Checking bulbs Apply the parking brake and turn the ignition key to ``ON'' without starting the engine. The following lights will come on: , or , , The following lights come on briefly and then go off: or , , If any light fails to come on, it may indicate a burned-out bulb or an open circuit in the electrical system. Have the system repaired promptly. Engine oil pressure warning light This light warns of low engine oil pressure. If the light flickers or comes on during normal 1-6 driving, pull off the road in a safe area, stop the engine immediately and call an INFINITI dealer or other authorized repair shop. Running the engine with the oil pressure warning light on could cause serious damage to the engine. The oil pressure warning light is not designed to indicate a low oil level. Use the dipstick to check the oil level. See INSTRUMENTS AND CONTROLS ``Engine oil'' in the ``Do-it-yourself'' section. Charge warning light If the light comes on while the engine is running, it may indicate that there is something wrong with the charging system. Turn the engine off and check the alternator belt. If the belt is loose, broken, missing or if the light remains on, see your INFINITI dealer immediately. Seat belt warning light and buzzer The light and buzzer remind you to fasten seat belts. The light illuminates whenever the ignition key is turned to ``ON'', and will remain illuminated until the driver's seat belt is fastened. At the same time, the buzzer will sound for about six seconds unless the driver's seat belt is securely fastened. Refer to ``Seat belts'' in the ``Pre-driving checks and adjustments'' section for precautions on seat belt usage. 1. The air bag light does not come on for 7 seconds and then go off as described above. 2. The air bag light flashes intermittently or remains on. 3. The air bag light does not come on at all. Unless checked and repaired, the Supplemental Restraint System may not function properly. For additional details on the Air Bag System, see Section 2. CAUTION: Do not continue driving if the belt is loose, broken or missing. Air bag warning light When the ignition key is in the ``ON'' or ``START'' position, the air bag light will illuminate for about 7 seconds and then turn off. This means the system is operational. If any of the following conditions occur, the air bag needs servicing and your vehicle must be taken to your nearest authorized INFINITI dealer. 1-7 Low washer fluid warning light This light comes on when the washer tank fluid is at a low level. Add washer fluid as necessary. See the ``Do-it-yourself'' section. Door open warning light This light comes on when any of the doors are not closed securely while the ignition key is ``ON''. or Brake warning light This light functions for both the parking brake and the foot brake systems. INSTRUMENTS AND CONTROLS Parking brake indicator The light comes on when the parking brake is applied. Low brake fluid warning The light warns of a low brake fluid level. If the light comes on while the engine is running with the parking brake not applied, stop the vehicle and perform the following: 1. Check the brake fluid level. Add brake fluid as necessary. See ``Brake and clutch fluid'' in the ``Do-it-yourself'' section. 2. If the brake fluid level is correct, check the warning system. Pressing the brake pedal when the engine stops and/or low brake fluid level may increase your stopping distance and require greater pedal effort as well as greater pedal travel. driving, contact your INFINITI dealer for repair. Overdrive off indicator light This light comes on when the overdrive switch is pushed to the ``OFF '' position. However when the ignition key is in the ``ON'' or ``START'' position and the overdrive switch is not in the ``OFF '' position, the light will illuminate for about 2 seconds and then turn off. This means the system is operational. or Anti-lock brake warning light WARNING: If you judge it to be safe, drive carefully to the nearest service station for repairs. Otherwise, have your vehicle towed because driving it could be dangerous. If the light comes on while the engine is running, it may indicate there is something wrong with the anti-lock portion of the brake system. Have the system checked by your INFINITI dealer. However if the light illuminates while starting the engine, it does not indicate a system malfunction. If an abnormality occurs in the system, the anti-lock function will cease but the ordinary brakes will continue to operate normally. If the light comes on while you are 1-8 Turn signal/hazard indicator lights The light flashes when the turn signal switch lever or hazard switch is turned on. High beam indicator light (Blue) This light comes on when the headlight high beam is on and goes out when the low beam is selected. INSTRUMENTS AND CONTROLS Cruise indicator light The light comes on while the vehicle speed is controlled by the cruise control system. If the light flickers while the engine is running, it may indicate there is something wrong with the cruise control system. Have the system checked by your INFINITI dealer. Brake pad wear warning The disc brake pads have audible wear warnings. When a brake pad requires replacement, it will make a high pitched scraping sound when the vehicle is in motion whether or not the brake pedal is depressed. Have the brakes checked as soon as possible if the warning sound is heard. system which may affect your warranty coverage. Although the vehicle is still driveable, see your nearest INFINITI dealer as soon as possible. To avoid system damage, do not drive at speeds above 45 MPH (72 km/h). If possible, avoid hard acceleration or deceleration. If the fuel filler cap is not tightened properly, the MIL may come on. Check and securely tighten the fuel filler cap, and have your vehicle checked as noted above. Key reminder buzzer The buzzer will sound if the driver side door is opened while the key is left in the ignition switch (ignition switch is turned off). Remove the key and take it with you when leaving the vehicle. Malfunction indicator light (MIL) If the MIL comes on or blinks while the engine is running, it may indicate a potential emission control problem. Light reminder buzzer A buzzer will sound when the driver side door is opened if the light switch is turned on (ignition switch is turned off). Turn the light switch off when you leave the vehicle. CAUTION: Continued operation without having the emission control system checked and repaired as necessary could lead to poor driveability, reduced fuel economy, and possible damage to the emission control 1-9 THEFT WARNING The theft warning system provides visual and audio alarm signals if parts of the vehicle are disturbed. INSTRUMENTS AND CONTROLS How to activate the theft warning system The light will glow for about 30 seconds and then blink. The system is now activated. If, during this 30 second time period, the door is unlocked by the key or multi-remote controller, or the ignition key is turned to ``ACC'', the system will not activate. hood, trunk lid and back door locked and ignition key off. Turn the ignition key to ``ACC'' to turn the system off. Theft warning system operation The warning system will give the following alarm: The headlights blink and the horn sounds intermittently. In addition, the starter motor will not operate. The alarm automatically turns off after 2 to 3 minutes; however, the alarm will reactivate if the vehicle is tampered with again. The alarm can be shut off by unlocking a door or trunk lid with the key. The alarm is activated by: Unlocking the door or trunk lid without using the key or multi-remote controller CAUTION: If the key is turned quickly when locking the door, the system may not activate. Furthermore, if the key is turned excessively to the unlock position, the system may be deactivated when the key is removed. If the indicator light fails to glow for 30 seconds, unlock the door once and lock it again. Even when the driver and/or passengers are in the vehicle, the system will activate with all doors, SII0035 1. Close all windows. The system can be activated even if the windows are open. 2. Remove the key from the ignition switch. 3. Close and lock all doors, hood and trunk lid. The doors can be locked either with or without the key. 4. Confirm that the indicator light comes on. 1-10 INSTRUMENTS AND CONTROLS (even if the door is opened by releasing the door inside lock knob) or opening the trunk lid by operating the opener release button. Opening the hood. Pushing in or pulling out of the key cylinder on the door or trunk lid. WINDSHIELD WIPER AND WASHER SWITCH The windshield wiper and washer operates when the ignition key is in the ``ACC'' or ``ON'' position. CAUTION: Do not operate the washer continuously for more than 30 seconds. Do not operate the washer if the reservoir tank is dry. How to stop alarm The alarm will stop only by unlocking a door or trunk lid with the key or multi-remote controller. The alarm will not stop if the ignition switch is turned to ``ACC'' or ``ON''. If the system does not operate as described above, have it checked by your INFINITI dealer. SII0036 WARNING: In freezing temperatures the washer solution may freeze on the windshield and obscure your vision. Warm windshield with the defroster before you wash the windshield. Push the lever down to operate the wiper. Intermittent operation can be adjusted from 3 to 21 seconds by turning the knob. Pull the lever toward you to operate the washer. Then the wiper will also operate several times. 1-11 INSTRUMENTS AND CONTROLS REAR WINDOW AND OUTSIDE MIRROR DEFOGGER SWITCH CAUTION: When cleaning the inner side of the window, be careful not to scratch or damage the electrical conductors. The front clearance, side marker, tail, license plate and instrument lights will come on. Turn the switch to the `` '' position: Headlights will come on and all the other lights remain on. To select the high beam, push the lever forward. Pull it back to select the low beam. HEADLIGHT AND TURN SIGNAL SWITCH Lighting SII0037 To defog the rear window glass and outside mirrors, start the engine and push the switch on. (The indicator light will come on.) Push the switch again to turn the defogger off. SII0039 It will automatically turn off in approximately 15 minutes. Turn the switch to the `` SII0038 '' position: Daytime light system (For Canada) Even if the headlight control switch is off, the 1-12 INSTRUMENTS AND CONTROLS headlights' high beams will illuminate after starting the engine. The headlights will be a little dimmer than they are with the headlight switch in the `` '' position. If the parking brake is applied before the engine is started, the daytime lights will not be illuminated. The daytime lights will illuminate once the parking brake is released. Thereafter, the daytime lights will not turn off when using the parking brake at stop signals, etc. Passing signal Pulling the lever toward you will turn on the headlight high beam. CORNERING LIGHT Turn signal SII0041 WARNING: When the daytime light system is active, tail lights on your vehicle will not be on. It is necessary at dusk to turn on your headlights. Failure to do so could cause an accident injuring yourself and others. SII0040 Move the lever up or down to signal the turning direction. When the turn is completed, the turn signals cancel automatically. The cornering light provides additional illumination toward the turning direction. The light will come on when the turn signal lever is moved to the right or left with the headlights on. Lane change signal To indicate a lane change, move the lever up or down to the point where lights begin flashing. 1-13 INSTRUMENTS AND CONTROLS INSTRUMENT BRIGHTNESS CONTROL left until a click sound is heard, the light will be turned off. HAZARD WARNING FLASHER SWITCH FRONT FOG LIGHT SWITCH SII0042 SII0044 The instrument brightness control operates '' or when the light switch is in the `` `` '' position. Turn the control to adjust the brightness of instrument panel lights (except clock) and power window switch lights. When the control is turned to the right until a click sound is heard, the light intensity will be at maximum. When the control is turned to the SII0043 To turn the fog lights on, turn the headlight switch to the `` '' position, then turn the '' position. To turn them switch to the `` off, turn the switch to the ``OFF'' position. The headlights must be on for the fog lights to operate. Push the switch on to warn other drivers when you must stop or park under emergency conditions. All turn signal lights will flash. WARNING: When stalled or stopped on the roadway under emergency conditions, move the vehicle well off the road. 1-14 INSTRUMENTS AND CONTROLS Do not use the switch while moving on the highway unless unusual circumstances force you to drive so slowly that your vehicle might become a hazard to other traffic. Some state laws may prohibit the use of the hazard warning flasher switch while driving. Turn signals do not work when the switch is operating. The flasher can be actuated with the ignition switch either off or on. 1. Start the engine. For No heat, the switch has a center ``OFF'' position between Low and High. The indicator light in the switch will illuminate when Low or High is selected. The heater is controlled by a thermostat, automatically turning the heater on and off. The indicator light will remain on as long as the switch is on. 3. When the vehicle's interior is warmed, or before you leave the vehicle, be sure to turn the switch off. CAUTION: SII0045 CAUTION: The battery could run down if the seat heater is operated while the engine is not running. 2. Selecting heat range. For Low heat, press the top of the switch. For High heat, press the bottom of the switch. 1-15 HEATED SEAT The front seats are warmed by built-in heaters. The switches located on the center console can be operated independently of each other. Do not use the seat heater for extended periods, or when the seat is not occupied. Do not put anything on the seat which insulates heat, such as ablanket, cushion, seat cover, etc. Otherwise, the seat may become overheated. INSTRUMENTS AND CONTROLS STORAGE TRAY Do not place anything hard or heavy on the seat or pierce it with a pin or similar object. This may result in damage to the heater. Any liquid spilled on the heated seat should be removed immediately with a dry cloth. When cleaning the seat, never use benzine, thinner, or any similar materials. If any abnormalities are found or the heated seat does not operate, turn the switch OFF and have the system checked by your INFINITI dealer. SII0046 Push the lighter in all the way. When the lighter is heated, it will spring out. Return the lighter to its original position after use. SII0047 To open the storage tray, push and release. The storage tray will automatically move to the open position. WARNING: The cigarette lighter should not be used while driving in order that full attention may be given to the driving operation. WARNING: The storage tray should not be used while driving in order that full attention may be given to the driving operation. CIGARETTE LIGHTER AND ASH TRAYS The cigarette lighter operates when the ignition switch is in the ``ACC'' or ``ON'' position. 1-16 INSTRUMENTS AND CONTROLS CUP AND CARD HOLDERS CAUTION: Avoid abrupt starting and braking when the cup holder is being used to prevent splashing the drink. CARGO NET SII0048 WARNING: The cup and card holders should not be used while driving in order that full attention may be given to the driving operation. SII0059 This cargo net can hold packages or objects in place in a wide variety of layouts using 1-17 INSTRUMENTS AND CONTROLS various attaching hooks. Do not put heavy objects in the cargo net. The net is designed only to hold light packages or objects in place while driving. switch (driver side switches) will open or close all the windows. WARNING: Make sure that all passengers have their hands, etc. inside the vehicle before closing the windows. Do not leave children unattended inside the vehicle. They could unknowingly activate switches. Locking passenger's window When the lock button is pushed in, only the driver side window can be opened or closed. Push it in again to cancel. POWER WINDOW The power window only operates when the ignition key is in the ``ON'' position. Power window automatic switch SII0050 SII0049 To open or close the window, push down or pull up the switch and hold it. The main The passenger side switch will open or close only the corresponding window. To open or close the window, hold the switch down or up. SII0051 To fully open the driver side window, com1-18 INSTRUMENTS AND CONTROLS pletely push down the switch and release it; it need not be held. The window will automatically open all the way. To stop the window, just pull up the switch toward the ``CLOSE'' side. To close the roof, keep pressing the switch to '' side. the `` Tilting the sunroof To tilt up, first close the sun roof, then keep '' side of the tilt switch. To pushing the `` tilt down the sun roof, keep pushing the `` '' side. Do not stand up or extend any portion of your body out of the opening while driving. Remove water drops, snow, ice or sand from the sun roof before opening. Do not place any heavy object on the sun roof or surrounding area. SUNROOF The sunroof will only operate when the ignition key is in the ``ON'' position. Sun shade Open/close the sun shade by sliding it backward/forward. The shade will open automatically when the sunroof is opened. However, it must be closed manually. Sliding the sunroof WARNING: Be extremely careful not to have any part of your body in the sun roof opening while it is closing. SII0052 To open the roof, keep pressing the switch to the `` '' side. 1-19 INSTRUMENTS AND CONTROLS If the sunroof does not close CAUTION: Turn the ignition key to the ``OFF'' position. 1. Remove the cover as illustrated. The shaft end of the sunroof motor will be visible. 2. Using the wrench supplied in the tool bag, turn the shaft clockwise to close the sunroof. If the sunroof does not tilt down, turn the shaft counterclockwise to tilt the sunroof down. Have the sunroof system checked and repaired by your INFINITI dealer. will not indicate the correct time. Readjust the time. SII0054 Adjusting the time Push the H button to adjust the hour. Push the M button to adjust the minute. CLOCK SII0053 INTERIOR LIGHT The interior light has a three-position switch. When the switch is in the center `` '' position, the light will illuminate when a door is opened. The digital clock displays time when the ignition key is in ``ACC'' or ``ON''. If the power supply is disconnected, the clock 1-20 INSTRUMENTS AND CONTROLS The timer is cancelled, and the interior light will turn off when: The driver's door is locked. The ignition switch is turned ``ON''. FRONT PERSONAL LIGHT IIC038M Interior light timer The interior light will stay on for about 30 seconds when: The driver's door is unlocked while the key is removed from the ignition switch. The key is removed from the ignition switch while the driver's door is closed. The key is removed from the ignition switch and the driver's door is opened and then closed. 1-21 IIC036 INSTRUMENTS AND CONTROLS VANITY MIRROR LIGHT INTEGRATED HomeLinkTM TRANSMITTER (If so equipped) The Integrated HomeLinkTM Transmitter provides a convenient way to consolidate the functions of up to three individual hand-held transmitters into one built-in device. WARNING: Do not use this Integrated HomeLinkTM Transmitter with any garage door opener that lacks safety stop and reverse features as required by federal safety standards (these standards became effective for models manufactured on April 1, 1982). A garage door opener which cannot ``detect'' an object in the path of a closing garage door and then automatically stop and reverse the door, does not meet current federal safety standards. Using a garage door opener without these features increases the risk of serious injury or death. SII0055 THE INTEGRATED HomeLinkTM TRANSMITTER: will operate garage doors, gates, home/office lighting systems and security systems by storing and transmitting the programming information of your current hand-held transmitters. is built-in and powered by your vehicle's battery and charging system. No separate batteries are necessary. The light on the vanity mirror will turn on when the cover on the vanity mirror is opened. TRUNK LIGHT The light illuminates when the trunk lid is opened. When the trunk lid is closed, the light will go off. 1-22 INSTRUMENTS AND CONTROLS PROGRAMMING THE HomeLinkTM TRANSMITTER Your vehicle's engine should be turned off while programming your transmitter. The Integrated HomeLinkTM Transmitter may not work with older garage door openers that do not meet current Federal Consumer Safety Standards. 1. Test the Integrated HomeLinkTM Transmitter by pressing any button. The red indicator light should come on. If you have previously programmed a button proceed to step 3. 2. Clear all channels on the Integrated HomeLinkTM Transmitter by holding down both outside buttons (#1 & #3) until the red light begins to flash rapidly (approximately 20 seconds). Then release both buttons. 3. Select which of the three Integrated 1-23 HomeLinkTM Transmitter buttons you want to program. 4. Hold the end of your hand-held transmitter against the bottom surface of the Integrated HomeLinkTM Transmitter so that you can still see the red indicator light. 5. Press the desired button until the red indicator light flashes slowly. Do not release the button. Continue holding and press the hand-held transmitter button through step 6. 6. Hold down both buttons until the red indicator light on the Integrated HomeLinkTM Transmitter flashes rapidly (This may take 10-90 seconds). Then release both buttons. The rapid flashing means that the transmitter has been successfully programmed to match your hand-held transmitter. You can now use the Integrated HomeLinkTM Transmitter instead of your hand-held transmitter. SII0056 WARNING: During the programming procedure your garage door or security gate will open and close (if the transmitter is within range). Make sure that people or objects are clear of the garage door, gate, etc. that you are programming. INSTRUMENTS AND CONTROLS Note to Canadian users: Prior to 1992, D.O.C. regulations required many hand-held transmitters to stop transmitting after one or two seconds, even though you continue to hold down the button. If you think you have one of these hand-held transmitters, you should press and re-press the transmitter button every 2 seconds without ever releasing the integrated HomeLinkTM Transmitter button. The indicator light on the Integrated HomeLinkTM Transmitter should blink rapidly indicating a successful programming procedure. If it returns to the slow blink of program mode, continue to periodically reactivate your hand-held transmitter until a successful programming procedure is indicated by the rapidly flashing indicator light. mitter. The red indicator light illuminates while the signal is being transmitted. The effective transmission range of the Integrated HomeLinkTM Transmitter may differ from your hand-held transmitter. results, place the end opposite the battery compartment against the Integrated HomeLinkTM Transmitter when programming. PROGRAMMING PROBLEM DIAGNOSIS Be sure to keep your original hand-held transmitter for possible reprogramming if necessary. Make sure batteries in the hand-held transmitter are fully charged. Hold the hand-held transmitter against the bottom surface of the Integrated HomeLinkTM Transmitter so that you can still see the red indicator light. Hold buttons for duration of the programming without interruption. Rotate your hand-held transmitter endover-end and program again. For best 1-24 CLEARING THE PROGRAMMING INFORMATION To clear the Integrated HomeLinkTM Transmitter of all previous programming information, simultaneously hold down the outside two buttons (#1 & #3) until the red indicator light begins to flash rapidly (approximately 20 seconds). This will clear all three buttons. Individual buttons cannot be cleared, but can be reprogrammed at any time by following the programming procedures described above. IF YOUR VEHICLE IS EVER STOLEN If your vehicle has been stolen, you should change the codes of any device that was programmed into the Integrated HomeLinkTM Transmitter as soon as possible. Consult the OPERATING THE TRANSMITTER To operate, simply press the appropriate button on the Integrated HomeLinkTM Trans- INSTRUMENTS AND CONTROLS owners manual of each device, or call the manufacturer or dealer of those devices. When your vehicle is recovered, you will have to reprogram the Integrated HomeLinkTM Transmitter with your new transmitter information. the user's authority to operate the device. DOC: ISTC 1763K1313 FCC I.D.: CB2V67690 FCC Notice: This device complies with FCC rules part 15. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference that may be received, including interference that may cause undesired operation. The transmitter has been tested and complies with FCC and DOC/MDC rules. Changes or modifications not expressly approved by the party responsible for compliance could void 1-25 2 PRE-DRIVING CHECKS AND ADJUSTMENTS Key............................................................... 2-2 Door locks ................................................... 2-2 Multi-remote control system....................... 2-4 Hood release................................................ 2-8 Glove box lock............................................. 2-8 Trunk lid lock .............................................. 2-9 Fuel filler lid lock....................................... 2-10 Seats.......................................................... 2-11 Supplemental restraint system (Air bag system)........................................ 2-15 Warning and caution labels....................... Air bag warning light................................. Seat belts................................................... Child restraints for infants and small children ............................................ Tilting steering wheel ................................ Outside mirror remote control .................. Foldable outside mirrors ........................... Inside mirror ............................................. Automatic anti-dazzling inside mirror ....... 2-19 2-19 2-21 2-27 2-34 2-35 2-35 2-36 2-36 PRE-DRIVING CHECKS AND ADJUSTMENTS KEY numbers so it is very important to keep track of your key number plate. A key number is only necessary when you have lost all keys and do not have one to duplicate from. If you still have a key, this key can be duplicated by your INFINITI dealer or a lock smith shop. To lock the door, turn the key towards the front of the vehicle. To unlock, turn it towards the rear. Locking the front door will simultaneously lock the other doors. Locking the doors without key DOOR LOCKS Locking front doors with key SIP0049 The master key can be used for all the locks. Record the key number on the key number plate and keep it in a safe place (such as your wallet), NOT IN THE CAR. A key number plate is supplied with your key. Keep the plate in a safe place. INFINITI does not record key 2-2 SIP0051 SIP0050 To lock from the outside without a key, move the inside lock knob to the ``LOCK'' position. Then close the door. When locking the door this way, be certain not PRE-DRIVING CHECKS AND ADJUSTMENTS to leave the key inside the vehicle. The inside lock knob cannot be set to the ``LOCK'' position with the front doors open and with the key in the ignition. CHILD SAFETY REAR DOOR LOCK Child safety locking helps prevent doors from being opened accidentally, especially when small children are in the vehicle. When the lever is in the lock position, the rear door can be opened only from the outside. SIP0053 CAUTION: Always have the doors locked while driving. Along with the use of seat belts, this provides greater safety in the event of an accident by helping to prevent persons from being thrown from the vehicle. This also helps keep children and others from unintentionally opening the doors, and will help keep out intruders. Before opening any door, always look for and avoid oncoming traffic. Turning the front door key to the front of the vehicle will lock all doors. Turning the front door key one time to the rear of the vehicle will unlock the corresponding door. From that position, returning the key to Neutral (where the key can only be removed and inserted.) and turning it to the rear again within 5 seconds will unlock all doors. Pushing the front door inside lock knob to the ``LOCK'' position will lock all doors. SIP0052 POWER DOOR LOCK The power door lock system allows you to lock or unlock all doors simultaneously. 2-3 PRE-DRIVING CHECKS AND ADJUSTMENTS The remote controller can operate at a distance of approximately 49 ft (15 m) from the vehicle. (The effective distance depends upon the conditions around the vehicle.) As many as four remote controllers can be used with one vehicle. For information concerning the purchase and use of additional remote controllers, contact your INFINITI dealer. Do not place the remote controller for an extended period in an area where temperatures exceed 140°F (60°C). SIP0054 Operating the lock-unlock switch will lock or unlock all doors. CAUTION: Listed below are conditions or occurrences which will damage the remote controller. Do not allow the remote controller to become wet. Do not drop the remote controller. Do not strike the remote controller sharply against another object. MULTI-REMOTE CONTROL SYSTEM It is possible to lock/unlock all doors, to open the driver's and front passenger's windows, to release the trunk lid and to turn on or off the interior light by using the remote controller from outside the car. Be sure to remove the key from the vehicle before locking the doors and leaving it. 2-4 PRE-DRIVING CHECKS AND ADJUSTMENTS DOOR LOCK OPERATION 1. Remove the ignition key. 2. Close all doors. 3. Push the lock button on the remote controller. 4. The hazard indicator flashes twice. 5. All doors will lock. Although door locking with the remote controller can be confirmed by looking at the hazard indicator, always check to be sure that the doors are properly locked before leaving your vehicle. DOOR UNLOCK OPERATION 1. Push the unlock button on the remote controller. 2. Only the driver side door will unlock. Push the unlock button on the remote controller again within 5 seconds. All doors will unlock. SIP0055 2-5 PRE-DRIVING CHECKS AND ADJUSTMENTS 3. The interior light will stay on for 30 seconds when the interior light switch is in the center `` '' position. The interior light can be turned off without waiting for 30 seconds by inserting the key into the ignition and turning it ``ON'' or by locking the doors with the remote controller or by pushing the interior light button. window cannot be closed by using the remote controller. 3. The alarm will stop when any of the key functions on the remote controller are used. The remote controller will not function. When the key is inserted into the key switch. When the battery in the remote controller is dead. The distance between the remote controller and vehicle is more than approx. 49 ft (15 m). TRUNK LID OPENER OPERATION 1. Push the trunk lid release button on the remote controller for longer than 0.5 second. 2. The trunk lid will open. The trunk lid will not open when the trunk lid cancel lever is in the ``CANCEL'' position. It can be opened only with the key. OPENING THE DRIVER'S AND FRONT PASSENGER'S WINDOW 1. Push the unlock button on the remote controller for longer than 1.5 seconds after the driver's door is unlocked. 2. The driver's and front passenger's window will open. The driver's and front passenger's window will also open after all doors are unlocked with the remote controller. The driver's and front passenger's PANIC ALARM OPERATION If you are near your vehicle and feel threatened, you may activate the alarm to call attention as follows: 1. Push the panic alarm button on the remote controller for longer than 1.5 seconds. 2. The theft warning alarm and headlight will stay on for 30 seconds. 2-6 PRE-DRIVING CHECKS AND ADJUSTMENTS BATTERY REPLACEMENT 1. Open the lid using a suitable tool. 2. Replace the battery with a new one. Recommended battery: Sanyo CR2025 or equivalent 3. Close the lid securely. 4. Push the remote controller button two or three times to check its operation. If the battery is removed for any reason other than replacement, perform step 4 above. An improperly disposed battery can harm the environment. Always confirm local regulations for battery disposal. The remote controller is water-proof; however, if it does get wet, immediately wipe completely dry. When changing batteries, do not let dust or oil get on the controller. 2-7 FCC Notice: This device complies with FCC rules part 15. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference that may be received, including interference that may cause undesired operation. The transmitter has been tested and complies with FCC and DOC/MDC rules. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the device. SIP0056 Replace the battery as follows: PRE-DRIVING CHECKS AND ADJUSTMENTS HOOD RELEASE GLOVE BOX LOCK SIP0057 SIP0058 1. Pull the hood lock release handle 1 located below the instrument panel; the hood will then spring up slightly. 2. Pull the lever 2 at the front of the hood with your fingertips and raise the hood. 3. When closing the hood, slowly close the hood and make sure it locks into place. When locking or unlocking the glove box, use the master key. The glove box may be opened by pulling the handle. 2-8 PRE-DRIVING CHECKS AND ADJUSTMENTS Key operation WARNING: Keep glove box lid closed while driving to help prevent injury in an accident or a sudden stop. TRUNK LID LOCK Trunk lid release operation The trunk lid release button is located under the drivers arm rest. SIP0060 To open the trunk lid, turn the key clockwise. To close, lower and push the trunk lid down securely. WARNING: SIP0059 To open the trunk lid, push the release button. To close, push the trunk lid down securely. Do not drive with the trunk lid open. This could allow dangerous exhaust gases to be drawn into the vehicle. 2-9 PRE-DRIVING CHECKS AND ADJUSTMENTS OPENER CANCEL LEVER FOR TRUNK LID FUEL FILLER CAP SIP0063 SIP0061 When the lever is in the ``CANCEL'' position, the trunk lid cannot be opened with the trunk lid release lever or handle. It can be opened only with the key. The fuel filler cap is a screw-on ratcheting type. Tighten the cap clockwise until ratcheting clicks are heard. If the fuel filler cap is not tightened properly, the MIL may come on. SIP0062 FUEL FILLER LID LOCK Opener switch To open the fuel filler lid, push the opener switch located on the dash. To lock, close the fuel filler lid securely. 2-10 PRE-DRIVING CHECKS AND ADJUSTMENTS CAUTION: Gasoline is extremely flammable and highly explosive under certain conditions. Always stop engine and do not smoke or allow open flames or sparks near the vehicle when refueling. Fuel may be under pressure. Turn the cap one-half turn and wait for any ``hissing'' sound to stop, to prevent fuel from spraying out and possible personal injury. Use only a genuine fuel filler cap as a replacement. It has a built-in safety valve needed for proper operation of the fuel system and emission control system. An incorrect cap can result in a serious malfunction and possible injury. SIP0064 comfort. Seat belts are most effective when the passenger sits well back and straight up in the seat. If the seat is reclined, the risk of sliding under the lap belt and being injured is increased. Do not leave children unattended inside the vehicle. They may inadvertently activate switches. Put the fuel filler cap on the cap holder while refueling. SEATS POWER SUPPORT SEAT WARNING: Do not adjust the driver's seat while driving. The seatback should not be reclined any more than needed for Operating tips The motor has an auto-reset overload protection circuit. If the motor stops during operation, wait 30 seconds, then reactivate the switch. Do not operate the power support seat for a long period of time when the engine is off. This will discharge the battery. 2-11 PRE-DRIVING CHECKS AND ADJUSTMENTS Seat lifter SIP0065 Forward and backward Move the switch forward or rearward while sliding the seat forward or rearward to the desired position. SIP0066 Push the top or bottom end of the switch to adjust the angle and height of the seat cushion to the desired position. Reclining Move the switch rearward until the desired angle is obtained. To bring the seat back forward again, move the switch forward and move your body forward. The seat back will move forward. 2-12 PRE-DRIVING CHECKS AND ADJUSTMENTS Lumbar support (Driver's seat) SIP0068 SIP0067 SIP0087 Turn the lever forward or backward to adjust the seat lumbar area. To raise the head restraint, just pull it up. To lower, push the lock knob and push the head restraint down. To adjust the head restraint, push it forward or rearward as shown. HEAD RESTRAINT Adjust the top of the head restraints level with the top of your ears. WARNING: Head restraints should be adjusted properly as they may provide significant protection against whiplash injury. Do not remove them. 2-13 PRE-DRIVING CHECKS AND ADJUSTMENTS REAR SEAT Center armrest and tray SIP0069 Pull the armrest forward and lay it horizontal. Then release the lever (inset) and pull the tray forward (If so equipped). In this condition you 2-14 are able to gain access to the trunk. PRE-DRIVING CHECKS AND ADJUSTMENTS SUPPLEMENTAL RESTRAINT SYSTEM (AIR BAG SYSTEM) This Supplemental Restraint System section contains important information concerning the driver and passenger air bags. The Supplemental Restraint System Air Bag can help reduce impact force to the driver and to the front passenger in certain frontal collisions. The air bags are designed to supplement the crash protection provided by the driver and passenger seat belts and are not a substitute for them. The seat belts should always be correctly worn and the driver and front passenger seated a suitable distance from the steering wheel and instrument panel. (See ``Seat belts'' for instructions and precautions on seat belt usage.) The air bags will operate only when the ignition switch is in the ``ON'' or ``START'' position. WARNING: The air bags ordinarily will not inflate in the event of a side impact, rear impact, roll over, or lower severity frontal collision; so always wear your seat belts to help reduce the risk or severity of injury in various kinds of accidents. The seat belts and the air bags are most effective when you are sitting back and upright in the seat. Air bags inflate with great force. If you are unrestrained, leaning forward, sitting sideways or out of position in any way, you are at greater risk of injury or death in a crash and may also receive serious or fatal injuries from the air bag if you are up against it when it inflates. Always sit back against the seatback and use the seat belts. 2-15 PRE-DRIVING CHECKS AND ADJUSTMENTS WARNING: Never let children ride unrestrained as shown in the previous illustrations. Children may be severely injured or killed when the air bag inflates if they are not properly restrained. IPD061 IPD063 Also, never install a rear-facing child restraint in the front seat. See ``Child restraints for infants and small children'' for details. IPD062 IPD064 2-16 PRE-DRIVING CHECKS AND ADJUSTMENTS This smoke is not harmful and does not indicate a fire, but care should be taken not to intentionally inhale it, as it may cause irritation and choking. Those with a history of breathing trouble should get fresh air promptly. Air bags, along with the use of seat belts, help to cushion the impact force on the face and chest of the occupant. They can help save lives and reduce serious injuries. However, an inflating air bag may cause facial abrasions or other injuries. Air bags do not provide restraint to the lower body. The seat belts should be correctly worn and the driver and passenger seated upright as far as practical away from the steering wheel or dashboard. Since the air bag inflates quickly in order to help protect the occupant, the force of the air bag inflating can increase the risk of injury if the occupant is too close to or is against the air bag module during inflation. SIP0070 Air bag system The driver air bag is located in the center of the steering wheel; the front passenger air bag is mounted in the dashboard above the glove box. The air bag system is designed to inflate in higher severity frontal collisions, although it may inflate if the forces in another type of collision are similar to those of a higher severity frontal impact. It may not inflate in certain frontal collisions. Vehicle damage (or lack of it) is not always an indication of proper air bag operation. When the air bag inflates, a fairly loud noise may be heard, followed by release of smoke. 2-17 PRE-DRIVING CHECKS AND ADJUSTMENTS The air bag will deflate quickly after a collision. The air bags will operate only when the ignition switch is in the ``ON'' or ``START'' position. WARNING: Right after inflation, several air bag system components will be hot. Do not touch them; you may severely burn yourself. No unauthorized changes should be made to any components or wiring of the air bag system. This is to prevent accidental inflation of the air bag or damage to the air bag system. Tampering with the air bag system may result in serious personal injury. Tampering includes changes to the steering wheel and the instrument panel assembly by placing material over the steering wheel pad and above the dashboard, or by installing additional trim material around the air bag system. Do not attach any objects to the steering wheel pad and to the instrument panel. Also, do not place any objects between any occupant and the steering wheel or instrument panel. Such objects may become dangerous projectiles and cause injury if the air bag inflates. Work around and on the air bag system should be done by an authorized INFINITI dealer. Installation of electrical equipment should also be done by an authorized INFINITI dealer. The yellow SRS wiring connectors should not be modified or disconnected. Unauthorized electrical test equipment and probing devices should not be used on the air bag system. 2-18 PRE-DRIVING CHECKS AND ADJUSTMENTS WARNING AND CAUTION LABELS AIR BAG WARNING LIGHT SIP0072 SIP0071 The air bag light, displaying ``AIR BAG'' in the instrument panel, monitors the circuits of the air bag. The circuits monitored by the air bag light are the diagnosis sensor unit, air bag modules and all related wiring. When the ignition key is in the ``ON'' or ``START'' position, the air bag light will illuminate for about 7 seconds and then turn off. This means the system is operational. Warning and caution labels about the air bag system are placed in the vehicle. 2-19 PRE-DRIVING CHECKS AND ADJUSTMENTS If any of the following conditions occurs, the air bag needs servicing and should be taken to your nearest authorized INFINITI dealer: 1. The air bag light does not come on for 7 seconds and then goes off as described above. 2. The air bag light flashes intermittently or remains on. 3. The air bag light does not come on at all. Under these conditions, the Supplemental Restraint System Air Bag will not operate properly. It must be checked and repaired. To ensure long-term functioning, the system must be inspected 10 years after the date of manufacture as noted on the certification label located on the driver side center pillar. When maintenance work is required on the vehicle, the air bag system and related parts should be pointed out to the person conducting the maintenance. The ignition key should always be in the ``LOCK'' position when working under the hood or inside the vehicle. The air bag system should be inspected by an authorized INFINITI dealer if there is any damage to the front end portion of the vehicle or replaced if the air bag has inflated. When selling your vehicle, we request that you inform the buyer about the air bag system and guide the buyer to the appropriate sections in this Owner's Manual. If you need to dispose of an air bag or scrap the vehicle, contact an authorized INFINITI dealer. Correct air bag disposal procedures are set forth in the appropriate INFINITI Service Manual. Incorrect disposal procedures could cause personal injury. WARNING: Once the air bag inflates, the air bag module will not function again and must be replaced. The air bag module cannot be repaired. After an air bag inflates, the front instrument panel assembly should be replaced by your INFINITI dealer. 2-20 Repair and replacement procedure The air bag system is designed to inflate on a one-time-only basis. As a reminder, unless it is damaged, the air bag light will remain illuminated after inflation has occurred. Repair and replacement of the air bag system should be done only by authorized INFINITI dealers. PRE-DRIVING CHECKS AND ADJUSTMENTS SEAT BELTS PRECAUTIONS ON SEAT BELT USAGE Your chances of being injured or killed in an accident and/or the severity of injury may be greatly reduced if you are wearing your seat belt and it is properly adjusted. INFINITI strongly encourages you and all of your passengers to buckle up every time you drive, even if your seating position includes an air bag. Some states, provinces or territories require that seat belts be worn at all times when a vehicle is being driven. The belt should be adjusted properly and to a snug fit. Failure to do so will reduce the effectiveness of the entire restraint system and increase the chance or severity of injury in an accident. Do not wear the belt inside out or twisted. Be sure the seat belt tongue is securely fastened to the proper buckle. Do not allow more than one person to use the same belt. All seat belt assemblies including retractors and attaching hardware should be inspected by your INFINITI dealer after any collision. INFINITI recommends that all seat belt assemblies in use during a collision be replaced unless the collision was minor and the belts show no damage and continue to operate properly. Seat belt assemblies not in use during a collision should also be inspected and replaced if either damage or improper operation is noted. Never carry more people in the vehicle than there are seat belts. If the seat belt warning lamp glows continuously while the ignition is turned ``ON'' with all doors closed and all seat belts fastened, it may indicate a malfunction in the system. Have the system checked by your INFINITI dealer. Be sure to observe the following cautions when using seat belts. Failure to do so could increase the chance WARNING: Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be in appropriate child restraints. 2-21