B. Make the correct TCP/IP settings for your PC: 1. Install the TCP/IP protocol for your PC if it has not yet been installed. 2. From the Windows Start button on your PC, choose settings, and select the Control Panel item. 3. Double click the Network icon. Select the TCP/IP line that has been associated to your network card in the Configuration tab of the Network window. Quick Installation Guide for ADSL Wireless Broadband Router (The specifications are subject to changes without notice.) A. Hardware Installation Setup LAN connection: connect an Ethernet cable from your computer's Ethernet port to one of the LAN ports of this product. 4. Click on the Properties button. Click the IP Address tab. Select Obtain An IP Address Automatically. Note: The pictures shown here refer to the wireless Broadband Router. 1. Setup WAN connection with your printer: connect the network cable from Existing Connection to the ADSL port of this product. 2. Connect this product with your printer: connect the printer cable to the printer port of this product and that of your printer individually. 5. Click the Gateway tab. Clear all of the gateway settings. Click on the OK button. Note: If you want to set the IP of your PC manually, please refer to the User Manual. C. Configuring ADSL Wireless Router with Web Browser 1.Activate your browser and disable the proxy or add the IP address of this product into the exception. Then type this product's IP address (for example: http://192.168.0.1) in the Location (for Netscape Communicator) or Address( for Internet Explorer) field and press Enter. 2. Key in the system password (the factory default is "admin") in the System Password field and click on the Log in button. 3. Press the Wizard link in the Administrator's Main menu to enter the Wizard configuration setup. The following screen will be shown 4. For the definitions of the items, please refer to the on- line help or User Manual. 5. After all of the items are set, press the Save button and reboot this product. D. Print Server Installation For Windows 2000 and XP, you do not need to install the software. Please refer to Chapter 5 of the User manual for Print Server configuration. For Windows 95/98 and NT, please insert the installation CD-ROM into the CD-ROM drive. The following window will be shown automatically. If it does not, please run "install.exe" in the CD-ROM. E. Wireless Settings The settings for Wireless function are as follows: 1.SSID: default 2.Channel: The factory setting is as follow: channel 11 for North America; channel 13 for European (ETSI); channel 14 for Japan. 1. WEP: disable To read the user manual, please click on the " User' Manual". s F. Wireless clients: For example: We assume that the clients have already installed the wireless card driver and Utility In Win98, go to command mode and key "winipcfg" Please set the corresponding settings of the stations which you want to associate with this ADSL Wireless Broadband Router. 1. Select: SSID "default", then "Connect", like above. 2. Wireless clients will get one IP address 192.168.123.xxx from wireless router. In Win 2000 or XP, go to command mode and key "ipconfig": ...