Erratum for IC-2720H Please note the following correction in the IC-2720H instruction manual page 21, I Audio mute function, and page 39, I Programming a call channel. · WRONG · CORRECT I Audio mute function (page 21) Push [FUNC] then [SQLY D(MUTE)] to mute MUTE audio signals. · Both the left and right bands S/RF meter blink in fullscale condition. · Push [CLR A(MW)] (or any other key) to cancel the function. MAIN TX MAIN TX I Audio mute function (page 21) MUTE Push [FUNC] then [SQLY D(MUTE)] to mute audio signals. · The memory channel number indicator shows the current condition and "Si" indications alternately. · Push [CLR A(MW)] (or any other key) to cancel the function. MAIN TX MAIN TX BUSY M M BUSY M M Shows the current condition and "Si" indication alternately. S/RF meter blinks (full-scale). I Programming a call channel (page 39) Operating frequency, duplex information, subaudible tone information (tone encoder or tone squelch ON/OFF and its frequency) and alphanumeric channel names can also be programmed into the call channel. I Programming a call channel (page 39) Operating frequency, duplex information, subaudible tone information (tone encoder or tone squelch ON/OFF and its frequency) can be programmed into the call channel. A-6124D-2EX ...