User manual YAMAHA 01V96 - 2

Studio Manager for / / Installation Guide / Keep This Manual For Future Reference. E 2 Important Information Special Notices · · The software and this owner's manual are the exclusive copyrights of Yamaha Corporation. Use of the software and this manual is governed by the Software Licensing Agreement which the purchaser fully agrees to upon breaking the seal of the software packaging. (Carefullyread the agreement at the end of this manual before installing the software.) Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written consent of the manufacturer. Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for the results of the use of this manual and the software. This disc is a CD-ROM. Do not attempt to play the disc on an audio CD player. Doing so may result in irreparable damage to your audio CD player. Copying of the commercially available music sequence data and/or digital audio files is strictly prohibited except for your personal use. The screen displays as illustrated in this owner's manual are for instructional purposes, and may appear somewhat different from the screens which appear on your computer. Future upgrades of application and system software and any changes in specifications and functions will be announced separately. · · · · · · Trademarks Adobe, Acrobat, and Reader are registered trademarks of Adobe Systems Incorporated. Apple, AppleTalk, and Macintosh are registered trademarks of Apple Computer, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. OMS is a registered trademark of Opcode Systems, Inc. Pentium and Celeron are registered trademarks of Intel Corporation. PowerPC is a registered trademark of International Business Machines Corporation. SmartMedia is a trademark of Toshiba America, Inc. All other trademarks are the property of their respective holders and are hereby acknowledged. Copyright No part of the Studio Manager software or its documentation may be reproduced or distributed in any form or by any means without the prior written authorization of Yamaha Corporation. © 2003 Yamaha Corporation. All rights reserved. Yamaha Web Site Information about Studio Manager, related products, and other Yamaha professional audio equipment is available on the Yamaha Professional Audio Web site at: http://www.yamahaproaudio.com/ * Specifications and descriptions in this owner's manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer. Studio Manager for DM2000/DM1000/02R96/01V96--Installation Guide 3 Contents 1 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 CD-ROM Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Windows System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Macintosh System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 System Hookup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Configuring Your Yamaha Mixing Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 2 Windows Installation . . . . . . . . . . . . . . . . . . . . . . . . 8 Acrobat Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 USB MIDI Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Yamaha CBX Driver (DM2000/02R96 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Studio Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Card Filer (DM2000 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 3 Macintosh Installation . . . . . . . . . . . . . . . . . . . . . . 16 Acrobat Reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . OMS (Open Music System) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . USB MIDI Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Studio Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Card Filer (DM2000 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting Up OMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 16 17 18 18 19 4 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Starting Studio Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Quitting Studio Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Specifying the MIDI Port (DM1000/01V96 & Windows only) . . . . . . . . . . . . . . Configuring Studio Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Synchronizing Studio Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Working with Sessions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 20 20 21 22 23 5 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Studio Manager for DM2000/DM1000/02R96/01V96--Installation Guide 4 Chapter 1--Getting Started 1 Getting Started Introduction · · · · With Yamaha Studio Manager you can control your Yamaha digital mixing console from your Windows or Macintosh computer. There are four versions of Studio Manager: Studio Manager for DM2000 Studio Manager for 02R96 Studio Manager for DM1000 Studio Manager for 01V96 The CD-ROM supplied with the DM2000 or 02R96 contains Studio Manager for DM2000 and Studio Manager for 02R96. The CD-ROM supplied with the DM1000 or 01V96 contains Studio Manager for DM1000 and Studio Manager for 01V96. This Installation Guide explains how to install Studio Manager and the necessary driver software for Windows and Macintosh computers. The owner's manual for Studio Manager can be found on the included CD-ROM (Acrobat PDF format). CD-ROM Contents DM2000/02R96 CD-ROM Folder Acroread\English SM_\DM2000 SM_\02R96 Mididrv_ Windows USBdrv_ USBdrv2k_ Software Acrobat Reader1, 2 Studio Manager for DM20001 Studio Manager for Yamaha CBX Driver Yamaha USB MIDI Driver (Windows 98, Me) Yamaha USB MIDI Driver (Windows 2000, XP) Card Filer1 Acrobat Reader,1, 2 Studio Manager for DM20001 Studio Manager for 2.3.81, 2 OMS Setup for YAMAHA 02R961 02R961 Description Adobe Acrobat Reader software for viewing the PDF manuals. Yamaha Studio Manager for DM2000 Yamaha Studio Manager for 02R96 Yamaha serial driver. Necessary if you are connecting to a serial port on your PC. Yamaha USB driver. Necessary if you are connecting to a USB port on your PC. Yamaha utility for transferring and managing data stored on the DM2000's SmartMedia card. Adobe Acrobat Reader software for viewing the PDF manuals. Yamaha Studio Manager for DM2000 Yamaha Studio Manager for 02R96 Opcode driver software for use with MIDI applications on Macintosh computers. OMS studio setup files for use with the DM2000 and 02R96. Yamaha USB driver. Necessary if you are connecting to a USB port on your Macintosh computer. Yamaha utility for transferring and managing data stored on the DM2000's SmartMedia card. Card_ Acroread\English SM_\DM2000 SM_\02R96 Open Music System (OMS) Macintosh OMS_ USBdrv_ YAMAHA USB MIDI Driver Card_ Card Filer1 1. For information on using this software, refer to the PDF manual after installation. 2. This software is not supported by Yamaha. Studio Manager for DM2000/DM1000/02R96/01V96--Installation Guide Windows System Requirements 5 DM1000/01V96 CD-ROM Folder Acroread\English SM_\DM1000 Windows SM_\01V96 USBdrv_ USBdrv2k_ Acroread\English SM_\DM1000 SM_\01V96 Macintosh OMS_ Software Acrobat Reader1, 2 Studio Manager for DM10001 Studio Manager for 01V961 Description Adobe Acrobat Reader software for viewing the PDF manuals. Yamaha Studio Manager for DM1000 Yamaha Studio Manager for 01V96 Yamaha USB driver. Necessary if you are connecting to a USB port on your PC. Adobe Acrobat Reader software for viewing the PDF manuals. Yamaha Studio Manager for DM1000 Yamaha Studio Manager for 01V96 Opcode driver software for use with MIDI applications on Macintosh computers. OMS studio setup files for use with the DM1000 and 01V96. Yamaha USB driver. Necessary if you are connecting to a USB port on your Macintosh computer. Yamaha USB MIDI Driver (Windows 98, Me) Yamaha USB MIDI Driver (Windows 2000, XP) Acrobat Reader,1, 2 Studio Manager for DM10001 Studio Manager for 2.3.81, 2 OMS Setup for YAMAHA 01V961 Open Music System (OMS) USBdrv_ YAMAHA USB MIDI Driver 1. For information on using this software, refer to the PDF manual after installation. 2. This software is not supported by Yamaha. Windows System Requirements The system requirements of your operating system may be different to those listed here. Studio Manager Computer OS Memory Hard Disk Display A PC with a 433 MHz or faster Intel Pentium or Celeron family processor Windows 98SE, Me, 2000, XP Home Edition, XP Professional 128 MB or more 20 MB or more of free space 1024 x 768 pixels, 256 colors or higher 1280 x 1024, High Color 16-bit recommended (If you use display settings of 1024 x 768, turn on the Task Bar's Auto-hide option.) Card Filer (DM2000 only) Computer OS Memory Hard Disk Display A PC with a 100 MHz or faster Intel Pentium or Celeron family processor Windows 95, 98, 98SE, Me, NT4.0, 2000, XP Home Edition, XP Professional 8 MB or more 2 MB or more of free space 800 x 600 pixels, 256 colors or higher Yamaha USB MIDI Driver Computer OS Memory Hard Disk A PC with a 166 MHz or faster Intel Pentium or Celeron family processor and a USB port Windows 98, 98SE, Me, 2000, XP Home Edition, XP Professional 32 MB or more 2 MB or more of free space Studio Manager for DM2000/DM1000/02R96/01V96--Installation Guide 6 Chapter 1--Getting Started Yamaha CBX Driver (DM2000/02R96 only) OS Windows 95, 98, 98SE, Me, NT4.0, 2000, XP Home Edition, XP Professional System requirements for software not listed here can be found on the CD-ROM. Macintosh System Requirements The system requirements of your operating system may be different to those listed here. Studio Manager Computer OS Memory Hard Disk Display Other A Macintosh G3/233 MHz or better and a USB port Mac OS 8.6 to 9.2.2 (Mac OS X not supported) 120 MB or more of free memory (Virtual memory must be turned off) 7 MB or more 1024 x 768 pixels, 256 colors or higher 1280 x 1024, 32,000 colors recommended OMS 2.3.3 or later Note: If you are using a PowerBook on battery power, open the Energy Save control panel, and in Advanced Settings, Additional Power Savings, turn off Allow processor cycling. Card Filer (DM2000 only) Computer OS Memory Hard Disk Display A Macintosh computer with a PowerPC processor or better Mac OS 7.5 to 9.2.2 (Mac OS X not supported) 8 MB or more of free memory 6 MB or more 800 x 600 pixels, 256 colors or higher Yamaha USB MIDI Driver Computer OS Memory Hard Disk A Macintosh computer with a PowerPC processor or better and a USB port Mac OS 8.6 to 9.2.2 (Mac OS X not supported) 64 MB or more (recommended: 128 MB or more) 2 MB or more System requirements for software not listed here can be found on the CD-ROM. Studio Manager for DM2000/DM1000/02R96/01V96--Installation Guide System Hookup 7 System Hookup The following illustration shows the available hookup methods you can use to connect your Yamaha mixing console to your computer: serial, USB, MIDI. Yamaha mixing console rear panel Mac or PC 1. Serial (DM2000/02R96 only) (Yamaha CCJ-Mac or equivalent) Mac serial port Serial cable (Yamaha CCJ-PC2 or equivalent) TO HOST USB PC serial port 2. USB USB port USB cable 3. MIDI OUT IN MIDI interface MIDI cables Note: Before you connect to serial or MIDI ports, turn off your Yamaha mixing console and computer. Configuring Your Yamaha Mixing Console On your Yamaha mixing console, use the DISPLAY ACCESS [SETUP] button ([DIO/SETUP button on the 01V96) to locate the MIDI/TO HOST Setup page. Under "Studio Manager," select a port and assign an ID to your Yamaha mixing console. If you are using a serial connection, set the TO HOST SERIAL options as appropriate (i.e., "PC-2" for a Windows PC, or "Mac" for a Macintosh computer). Warning: Do not set the TO HOST SERIAL option to "Mac" while your Yamaha mixing console is connected to your PC's serial port. Doing so may damage your PC. Studio Manager for DM2000/DM1000/02R96/01V96--Installation Guide 8 Chapter 2--Windows Installation 2 Windows Installation Acrobat Reader 1 2 To view the PDF manuals included on the CD-ROM, you need to install the Adobe Acrobat Reader software. If you already have this software installed, skip this section. Start your computer and Windows, and then insert the included CD-ROM into your computer's CD-ROM drive. Double-click the "Acroread_" folder on the CD-ROM. This folder contains Acrobat software in several languages. Double-click the folder of the language you want to install. Double-click "ar***enu.exe." ("***" indicates the software version.) Follow the on-screen instructions to install the software. For instructions on using Acrobat Reader, choose Reader Help from Acrobat Reader's Help menu. 3 4 5 USB MIDI Driver If you are connecting your Yamaha mixing console to a USB port on your computer, you'll need to install the Yamaha USB driver. If you already have this driver installed, skip this section. Computer Studio Manager USB cable Driver DM2000/02R96 DM1000/01V96 · · · · The procedure you use for installing the Yamaha USB driver depends on which version of Windows you're using: Windows 98 & 98SE--page 9 Windows Me--page 12 Windows 2000--page 13 Windows XP--page 14 Studio Manager for DM2000/DM1000/02R96/01V96--Installation Guide USB MIDI Driver 9 Windows 98 & 98SE 1 2 3 Start your computer and Windows, and then insert the included CD-ROM into your computer's CD-ROM drive. Turn off your Yamaha mixing console, and then use a USB cable to connect its USB TO HOST port to a USB port on your computer. Turn on your Yamaha mixing console. The Add New Hardware Wizard appears. If it doesn't appear, try disconnecting and reconnecting the USB cable. Alternatively, open the Add New Hardware control panel. 4 Click Next. The following window appears. 5 Select "Search for the best driver for your device (Recommended)," and then click Next. Studio Manager for DM2000/DM1000/02R96/01V96--Installation Guide 10 Chapter 2--Windows Installation The following window appears. 6 Select "Specify a location," and specify "D:\USBdrv_" (replacing "D" with the drive letter of your CD-ROM drive), and then click Next. When the driver is located, "YAMAHA USB MIDI Driver" is displayed, as shown below. 7 Click Next. Note: You may be prompted to insert your Windows CD-ROM. Do not insert it! Click OK, and in the "Copy files from" section of the subsequent dialog box, enter "D:\USBdrv_" (replacing "D" with the drive letter of your CD-ROM drive), and then click OK. Studio Manager for DM2000/DM1000/02R96/01V96--Installation Guide USB MIDI Driver 11 The driver is installed, and the following window appears when the installation is complete. 8 Click Finish, and then restart your computer. Studio Manager for DM2000/DM1000/02R96/01V96--Installation Guide 12 Chapter 2--Windows Installation Windows Me 1 2 3 Start your computer and Windows, and then insert the included CD-ROM into your computer's CD-ROM drive. Turn off your Yamaha mixing console, and then use a USB cable to connect its USB TO HOST port to a USB port on your computer. Turn on your Yamaha mixing console. The Add New Hardware Wizard appears. If it doesn't appear, try disconnecting and reconnecting the USB cable. Alternatively, open the Add New Hardware control panel. 4 Select "Automatic search for a better driver (Recommended)," and then click Next. Windows Me should be able to locate the driver automatically, in which case you can proceed to Step 5. If the driver cannot be located, select "Specify the location of the driver (Advanced)," click Next, specify your CD-ROM drive (e.g., D:\USBdrv_), and then continue as prompted. The following window appears when the installation is complete. 5 Click Finish, and then restart your computer. Studio Manager for DM2000/DM1000/02R96/01V96--Installation Guide USB MIDI Driver 13 Windows 2000 1 2 Start your computer and Windows, log on as the Administrator, and then insert the included CD-ROM into your computer's CD-ROM drive. Go to My Computer­>Control Panel­>System­>Hardware­>Driver Signing­>File Signature Verification, select "Ignore--Install all files, regardless of file signature," and then click OK. Turn off your Yamaha mixing console, and then use a USB cable to connect its USB TO HOST port to a USB port on your computer. Turn on your Yamaha mixing console. The Found New Hardware Wizard appears. Click Next. Select "Search for a suitable driver for my device (Recommended)," and then click Next. In the subsequent window, select "CD-ROM drives" only, and then click Next. Note: You may be prompted to insert your Windows CD-ROM. Do not insert it! Click OK, and in the "Copy files from" section of the subsequent dialog box, enter "D:\USBdrv2k_" (replacing "D" with the drive letter of your CD-ROM drive), and then click OK. The driver is installed, and the message "Completing the Found New Hardware Wizard" appears. 3 4 5 6 7 8 Click Finish, and then restart your computer. Studio Manager for DM2000/DM1000/02R96/01V96--Installation Guide 14 Chapter 2--Windows Installation Windows XP 1 2 Start your computer and Windows, and then insert the included CD-ROM into your computer's CD-ROM drive. Click the Start button, and then click Control Panel. If the Control Panel window appears as shown below, click "Switch to Classic View" on the left side of the window in order to see all of the control panels. 3 Go to System Hardware­>Driver signatures­>Driver signature options, select "Ignore--Install software without asking for confirmation," and then click OK. Click OK to close the System Properties window, and then click the Close button to close the Control Panel window. Turn off your Yamaha mixing console, and then use a USB cable to connect its USB TO HOST port to a USB port on your computer. Turn on your Yamaha mixing console. The Found New Hardware Wizard appears. Select "Install software automatically (recommended) (I)," and then click Next. The driver is installed, and the message "Completing the Found New Hardware Wizard" appears. Click Finish, and then restart your computer. 4 5 6 7 8 Studio Manager for DM2000/DM1000/02R96/01V96--Installation Guide Yamaha CBX Driver (DM2000/02R96 only) 15 Yamaha CBX Driver (DM2000/02R96 only) If you're connecting your Yamaha mixing console to a serial port on your computer, you'll need to install the Yamaha CBX driver. If you already have this driver installed, skip this section. Double-click the "Mididrv_" folder on the CD-ROM. Double-click "Setup.exe." Follow the on-screen instructions to install the software. 1 2 3 Studio Manager 1 2 3 4 Double-click the "SM_" folder on the CD-ROM. Double-click the "DM2000," "02R96," "DM1000," or "01V96" folder as appropriate. Double-click "Setup.exe." Follow the on-screen instructions to install the software. Card Filer (DM2000 only) 1 2 3 Double-click the "Card_" folder on the CD-ROM. Double-click "Setup.exe." Follow the on-screen instructions to install the software. For information on using Card Filer, see the "CardFilerManual.pdf." This file is installed in the same folder as Card Filer. Studio Manager for DM2000/DM1000/02R96/01V96--Installation Guide 16 Chapter 3--Macintosh Installation 3 Macintosh Installation Acrobat Reader 1 2 To view the PDF manuals included on the CD-ROM, you need to install the Adobe Acrobat Reader software. If you already have this software installed, skip this section. Start your Macintosh, and then insert the included CD-ROM into your computer's CD-ROM drive. Double-click the "Acroread_" folder on the CD-ROM. This folder contains Acrobat software in several languages. Double-click the folder of the language you want to install. Double-click "Reader Installer." (The actual name of the installer depends on the language you select.) Follow the on-screen instructions to install the software. For instructions on using Acrobat Reader, choose Reader Guide from Acrobat Reader's Help menu. 3 4 5 OMS (Open Music System) Studio Manager requires OMS 2.3.3 or later in order to work on Macintosh computers. OMS 2.3.8 is included on the CD-ROM. If you already have OMS 2.3.3 or later installed, skip this section. Start your Macintosh, and then insert the included CD-ROM into your computer's CD-ROM drive. Double-click the "OMS_" folder on the CD-ROM. Double-click "Install OMS 2.3.8." Follow the on-screen instructions to install the software. When the installation is complete, click Restart. Note: Once the installation is complete, you may receive an error message warning that the installer did not quit. In this case, choose Quit from the File menu to quit the installer, then restart your computer. 6 1 2 3 4 5 Copy the "OMS_2.3_Mac.pdf" from the "OMS_" folder on the CD-ROM to the "Opcode:OMS Applications" folder on your hard disk. This file contains information on using and configuring OMS. Studio Manager for DM2000/DM1000/02R96/01V96--Installation Guide USB MIDI Driver 17 USB MIDI Driver If you're connecting your Yamaha mixing console to a USB port on your computer, you'll need to install the Yamaha USB driver. If you already have this driver installed, skip this section. Computer Studio Manager USB cable OMS Driver DM2000/02R96 DM1000/01V96 1 2 3 Start your Macintosh, and then insert the included CD-ROM into your computer's CD-ROM drive. Double-click the "USBdrv_" folder on the CD-ROM. Double-click "Install USB MIDI Driver." The Install USB MIDI Driver window appears, as shown below. Normally there's no need to set the Install Location, because the startup disk is selected by default. To select another disk, click the Switch Disk button. Although you can select a destination folder from the pop-up menu, the files are installed in the specified disk's System Folder regardless, so you can ignore that option. 4 5 Click Install, and follow the on-screen instructions to install the software. When the installation is complete, click Restart. Studio Manager for DM2000/DM1000/02R96/01V96--Installation Guide 18 Chapter 3--Macintosh Installation Studio Manager 1 2 3 4 5 Start your Macintosh, and then insert the included CD-ROM into your computer's CD-ROM drive. Double-click the "SM_" folder on the CD-ROM. Double-click the "DM2000," "02R96," "DM1000," or "01V96" folder as appropriate. Double-click "Install Studio Manager." Follow the on-screen instructions to install the software. Card Filer (DM2000 only) 1 2 3 4 Start your Macintosh, and then insert the included CD-ROM into your computer's CD-ROM drive. Double-click the "Card_" folder on the CD-ROM. Double-click "Install Card Filer." Follow the on-screen instructions to install the software. For information on using Card Filer, see the "CardFilerManual.pdf." This file is installed in the same folder as Card Filer. Studio Manager for DM2000/DM1000/02R96/01V96--Installation Guide Setting Up OMS 19 Setting Up OMS 1 The "OMS Setup for YAMAHA" folder on the included CD-ROM contains OMS studio setup files preconfigured for use with your Yamaha mixing console. Turn off your Yamaha mixing console, and then use a USB cable to connect its USB TO HOST port to a USB port on your computer. If you are connecting to the SERIAL TO HOST port, use a serial cable to connect to the Printer or Modem port on your computer. Turn on your Yamaha mixing console. Start your Macintosh, and then insert the included CD-ROM into your computer's CD-ROM drive. Open the "OMS_" folder on the CD-ROM, and then open the "OMS Setup for YAMAHA" folder. The "DM2000/02R96" folder contains the following OMS studio setup files: DM2000-USB DM2000-Modem DM2000-Printer 02R96-USB 02R96-Modem 02R96-Printer The "DM1000/01V96" folder contains the following OMS studio setup files: DM1000-USB 01V96-USB Copy the appropriate file to your computer's hard disk, and then double-click it. Note: If the AppleTalk dialog box appears, click the Turn It Off button, and then click OK on the subsequent dialog box. OMS Setup starts and the Studio Setup file window appears. 2 3 4 · · · · · · · · 5 6 Choose Make Current from the File menu, and then save the setup. Note: If you are using Studio Manager for DM2000/02R96 and the Modem or Printer port, go to OMS Setup Preferences and turn off "Use Apple SerialDMA driver when available." After completing the above setup, your Yamaha mixing console will be the only MIDI device in the current OMS studio setup. In order to use other MIDI devices, or to add an additional Yamaha mixing console, you must create a new studio setup. See the "OMS_2.3_Mac.pdf" for more information. Studio Manager for DM2000/DM1000/02R96/01V96--Installation Guide 20 Chapter 4--Getting Started 4 Getting Started Starting Studio Manager The following procedure uses "DM1000" as an example. The content of the menu items selected in the procedure below may vary depending on the version number of Studio Manager software. Windows: Click the Start button and then click Programs­>(YAMAHA OPT Tools­>)YAMAHA Studio Manager for DM1000­>Studio Manager for DM1000. Macintosh: Open the Studio Manager for DM1000 folder and double-click "SM_DM1K." If your Yamaha mixing console is detected while Studio Manager starts up, the Synchronization dialog box appears, from which you can choose to transfer the settings of your Yamaha mixing console to Studio Manager or vice versa. See "Synchronizing Studio Manager" on page 22 for more information. If no Yamaha mixing console is detected, a new Console window opens. The ONLINE indicator is displayed while Studio Manager is connected to your Yamaha mixing console. When no Yamaha mixing console is detected, the OFFLINE indicator is displayed. Quitting Studio Manager Choose Exit (Quit on the Macintosh) from the File menu. If there are no unsaved changes, all windows close and Studio Manager quits. If there are unsaved changes, a message asking whether or not you want to save the changes appears. Click Yes to save the changes and quit, click No to quit, or click Cancel to cancel the operation. Studio Manager can also be quit by clicking the Console window's Close button. Specifying the MIDI Port (DM1000/01V96 & Windows only) 1 2 Before selecting a MIDI port in Studio Manager (page 21), you must specify which MIDI port is connected to your DM1000. Start Studio Manager. Click the MIDI Setup button on the MIDI SETUP toolbar, as shown below. MIDI Setup The MIDI Setup dialog box appears. 3 Select the MIDI port to which your DM1000 is connected (e.g., MIDI In, Out, or Thru). Note: To use a MIDI port with Studio Manager, you must select it on the MIDI Setup dialog box (as explained above) and on the System Setup dialog box, as explained on page 21. Warning: Studio Manager does not yet support OPT (Open Plug-in Technology), so even if it appears in the menu of an OPT compatible program, do not start it in this way. Studio Manager for DM2000/DM1000/02R96/01V96--Installation Guide