6.5" Two-Way In-Ceiling Loudspeaker IC-6T Rugged, compact, and easy-to-install, the IC-6T is an excellent choice for distributedmusic systems and other applications requiring unobtrusive, high-quality loudspeakers with high output capability. Its integrated, zincplated steel back can and multi-tap transformer allow quick installation and configuration -- all you need is a screwdriver. A rotary switch conveniently located behind the grille allows instant choice of 70-volt (7.5- to 60-watt), 100-volt (15- to 60-watt), or conventional 16ohm operation. The housing is compatible with standard 0.5- and 0.75-inch conduit fittings, which are supplied along with support rings for use in conventional ceiling materials and an adjustable tile bridge that facilitates placement in suspended ceilings. Combined with excellent sound, very good sensitivity, and high powerhandling capability, these features make the IC6T an ideal speaker for new or retrofit installation in stores, offices, and other venues demanding tasteful appearance, pleasing sound, and total reliability. The IC-6T's rigid, low-resonance cast-polymer woofer frame and 6.5-inch injection-molded graphite cone deliver strong, clean bass in any environment. And its coaxially mounted 1-inch aluminum-dome compression driver tweeter is mated to a 90° x 90° Klipsch Tractrix ® Horn that can be swiveled ±15° to focus sound where needed and compensate for acoustical problems, opening up a wider range of acceptable placements. The IC-6T complies with all applicable fire and electrical standards, including UL 1480 and UL 2043. Its white frame and rustproof, powdercoated aluminum grille can be painted to match the ceiling. High-quality components and superior construction assure long, trouble-free service. Integrated steel back can and 60-watt multi-tap transformer 70-volt, 100-volt, or 16-ohm operation selectable via front baffle switch I Swiveling Tractrix Horn tweeter for clear sound in any location I Rugged cast-polymer woofer frame I Supplied with standard conduit fittings and tile bridge I I SPECIFICATIONS BANDWIDTH1 POWER HANDLING 2 85Hz-20kHz ± 4dB 85 watts (34.5V) 106dB 84.5dB 91dB 70V: 60W, 30W, 15W, 7.5W 100V: 60W, 30W, 15W Through Position: 16 ohms 90° Conical 8dB 6.3 16 ohms, 12 ohms minimum @ 20Hz Barrier Strip 11.188" (28.4cm) 9.75" (24.8cm) 11.25" (29.8cm) 11.5" (29.2cm) 9.25 lbs. (4.2kg) White R-800-IK MAX CONTINUOUS OUTPUT3 SENSITIVITY 2.83 V/1M SENSITIVITY 1W/1M4 TRANSFORMER TAPS 4 DISPERSION ANGLE DI Q NOMINAL IMPEDANCE INPUT CONNECTOR DIAMETER CUTOUT DIAMETER MOUNTING DEPTH CAN DEPTH WEIGHT FINISH INSTALLATION KIT 1 2 3 3M, half space anechoic AES standard, continuous pink noise 50Hz-10Hz, 6dB peaks Calculated at IM at power handling power input 4 Half space anechoic All specifications are subject to change without notice. ©2004 www.klipsch.com 1-800-KLIPSCH ...