Three-Way Fully Horn-Loaded Loudspeaker La Scala II When the La Scala first launched in 1963, audio pioneer Paul W. Klipsch made it for Arkansas gubernatorial candidate Winthrop Rockefeller to use as a public address speaker. Because some considered it a "portable" and more affordable version of the revolutionary Klipschorn®, the La Scala found success beyond the campaign. Despite its raw, unfinished appearance, the fully hornloaded, three-way La Scala sounded so good people still wanted to put it in their living rooms. Remaining virtually unchanged since those early campaign days, Klipsch decided to cosmetically improve the raw-looking La Scala by totally redesigning the way the cabinet was constructed. The goal was to achieve a more finished appearance and improve cabinet rigidity. It is now available in a variety of high-quality wood veneer finishes, including cherry, walnut and black ash. The La Scala II also includes a grille to cover the mid and high frequency horns. The bass horn cabinet walls are now constructed of 1-inch thick MDF rather than 3/4-inch plywood to offer more support, decrease resonance and deliver cleaner bass response. Even though the La Scala II adopts a more finished appearance, it still delivers the same sparkling highs, extreme output and unsurpassed low distortion bass response as the original design. It also continues to utilize the same horn-loaded drivers as the Klipschorn, making it highly efficient and able to produce high volumes consuming very little power and undetectable distortion. SPECIFICATIONS FREQUENCY RESPONSE SENSITIVITY POWER HANDLING MAXIMUM SPL NOMINAL IMPEDANCE ENCLOSURE TYPE CROSSOVER FREQUENCY TWEETER 51Hz-17kHz ± 4dB 105dB @ 1 watt/1 meter 100 Watts max continuous (400W peak) 121dB 8 ohms Fully horn-loaded HF: 4500Hz MF: 400Hz K-77-F 1" (2.54cm) Phenolic diaphragm compression driver Exponential K-55-X 2" (5.08cm) Phenolic diaphragm compression driver Exponential K-33-E 15" (38.1cm) Fiber-composite cone with a folded horn 38.5" (97.79cm) H x 24.25" (61.6cm) W x 25.25" (64.14cm) D 175.5 lbs. (79.6kg) Plywood and MDF Walnut Lacquer, Cherry Lacquer, Black Lacquer HIGH FREQUENCY HORN MIDRANGE MID-FREQUENCY HORN WOOFER DIMENSIONS WEIGHT ENCLOSURE MATERIAL FINISHES www.klipsch.com 1-800-KLIPSCH All specifications are subject to change without notice. ©2006 ...