In-Wall Loudspeaker R-5502-W · Perfect for left, center or right channel use · Easily mounts horizontally or vertically · Horn-loaded for high efficiency and low distortion · Bass and treble switches, IR receiver knockouts · Maximum installation reliability · Mix and match with our 5000 series products The R-5502-W employs dual 5.25-inch Cerametallic woofer cones for fast, accurate sound with dynamic detail, while a titanium tweeter mated to a pivoting Tractrix® Horn generates flat in-room frequency response with high efficiency and low distortion. The speaker's precision-voiced crossover networks further ensure that the high and low frequencies are faithfully reproduced. This in-wall speaker also consistently delivers thrilling, realistic sound, whether it's installed horizontally or vertically. It features all-new sure-grip mounting dogs that provide even pressure against drywall for long-term installation reliability, and includes a paintable grille that blends in perfectly with any décor. Bass and treble switches with custom EQ settings allow the speaker to be tailored to its environment, while IR receiver knockout holes allow for infrared repeaters, bringing custom configuration to installers. Furthermore, the R-5502-W offers unlimited flexibility. It is timbre matched to all of our 5000 series architectural products, so you can mix and match to create a high-performance, discreet stereo or home theater system that's just right for you. SpecificationS requency response power handling recommended amplifier power sensitivity nominal impedance high frequency drivers 46Hz-20kHz +/-3dB 75W continuous / 300W peak 130W 92dB @ 2.83V / 1m 8 ohms compatible 1" (2.5cm) Titanium diaphragm compression driver mated to pivoting 90° x 90° square Tractrix® Horn 2200Hz & 1300Hz Dual 5.25" (13.3cm) CerametallicTM cone woofers ABS Infinite baffle, front flush with wall 17.75" (45.1cm) H x 8" (20.3cm) W 3.5" (8.9cm) 16.5" (41.9cm) H x 6.5" (16.5cm) W IK-502-W (sold seperately) 6.5lbs (2.9kg) White paintable frame and grille high freq crossover low frequency drivers enclosure material enclosure type dimensions mounting depth cutout dimensions installation kit weight finishes www.klipsch.com 1-800-KLIPSCH All specifications are subject to change without notice. ©2008 ...