User manual SEGA ZOMBIE REVENGE - CONVERSION KIT

1ST PRINTING MARCH 99 TM SEGA NAOMI Jamma Compatible Conversion KIT SEGA ENTERPRISES, INC. USA MANUAL NO. 999-0784 Warranty Your new Sega Product is covered for a period of 90 days from the date of shipment. This certifies that the Printed Circuit Boards, Power Supplies and Monitor are to be free of defects in workmanship or materials under normal operating conditions. This also certifies that all Interactive Control Assemblies are to be free from defects in workmanship and materials under normal operating conditions. No other product in this machine is hereby covered. Sellers sole liability in the event a warranted part described above fails shall be, at its option, to replace or repair the defective part during the warranty period. For Warranty claims, contact your Sega Distributor. Should the Seller determine, by inspection that the product was caused by Accident, Misuse, Neglect, Alteration, Improper Repair, Installation or Testing, the warranty offered will be null and void. Under no circumstances is the Seller responsible for any loss of profits, loss of use, or other damages. This shall be the exclusive written Warranty of the original purchaser expressed in lieu of all other warranties expressed or implied. Under no circumstance shall it extend beyond the period of time listed above. 1 . EXPLANATION OF TEST AND DATA DISPLAY By operating the switch unit, periodically perform the tests and data check. When installing the machine initially or collecting cash, or when the machine does not function correctly, perform checking in accordance with the explanations given in this section. The following shows tests and modes that should be utilized as applicable. CAUTIONS TO BE HEEDED WHEN USING THE TEST MODE: In the case where plural machines are linked for communication play, if even one seat enters the test mode, all of the linked seats will enter the test mode. Therefore, if any one of the linked machines is in play, use care so as not to use the test mode. The contents of the setting changes made will not be effective unless the test mode is finished in the test mode. When the setting is changed, be sure to "EXIT" in the menu mode. Do not press the TEST BUTTON during network check at the time of turning the power on or exiting from the test mode. If anyone of the linked machines uses the test mode during network check, all other Seats will continue network checking. Cause all of the Seats to reenter the test mode and then have all of the Seats exit from the test mode simultaneously. When performing installation, servicing product or changing game boards refer to individual kit instructions for each of the listed items below: ITEMS DESCRIPTION When the machine is installed, perform the following: INSTALLATION 1. Check to see that each setting is as per standard setting made at the time of shipment. OF MACHINE 2. In the INPUT TEST mode, check each SW and VR. 3. In the OUTPUT TEST mode, check each of lamps. 4. In the MEMORY TEST mode, check ICs on the IC Board. MEMORY Choose MEMORY TEST in the MENU mode to allow the MEMORY test to be performed. In this test, PROGRAM RAMs, ROMs, and ICs on the IC Board are checked. Periodically perform the following: 1. MEMORY TEST 2. Ascertain each setting. 3. In the INPUT TEST mode, test the CONTROL device 4. In the OUTPUT TEST mode, check each of lamps. 1. In the INPUT TEST mode, check each SW and VR. 2. Adjust or replace each SW and VR. 3. If the problem can not be solved yet, check the CONTROL's moves. In the MONITOR ADJUSTMENT mode, check to see if the MONITOR adjustment is appropriately made. 1. MEMORY TEST 2. In the SOUND TEST mode, check the sound related ROMs. Check such data as game play time and histogram to adjust the difficulty level, etc PERIODIC SERVICING CONTROL SYSTEM MONITOR IC BOARD DATA CHECK 1 1 - 2 TEST MODE System Menu. This test mode mainly allows the IC board to be checked for accurate functioning, monitor color to be adjusted as well as COIN ASSIGNMENTS and GAME ASSIGNEMENTS to be adjusted. 1.) After turning power on, press the TEST button to have the following test item menu displayed. 2.) Press the SERVICE button to move the arrow. Bring the arrow to the desired item and press the TEST button. SYSTEM MENU USA VERSION RAM TEST JVS TEST SOUND TEST SYSTEM ASSIGNMENTS COIN ASSIGNMENTS BOOKKEEPING BACKUP DATA CLEAR CLOCK SETING ROM BD TEST GAME TEST MODE (ZOMBIE REVENGE IN USA) ->EXIT SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON OPERATION REQUIREMENTS OF THIS GAME: In the SYSTEM ASSIGNMENTS, the CABINET TYPE is set to 2 PLAYER(s) and MONITOR TYPE is set to HORIZONTAL. COIN ASSIGNMENTS intial settings COIN CHUTE TYPE COMMON COIN/ CREDIT SETTING #12 SEQUENCE SETTING OF COIN ASSIGNMENTS SEQUENCE 1: Number of credits required for Game Start. (intial value=1) SEQUENCE 2: Number of credits required for CONTINUE (intial value=1) SEQUENCE 3-8: NOT USED MEANING OF DISPLAY IN BOOKEEPING (2/2) P1(P2) SEQ 1: Play frequency of Player 1 (Player 2) P1(P2) SEQ 2: Frequency of CONTINUE by Player 1 (Player 2) P1(P2) SEQ 3-8: NOT USED 3.) Bring the arrow to the item of Game TEST MODE and press the TEST button to display the GAME TEST MENU peculiar to ZOMBIE REVENGE. See the next page onward. 4.) Upon finishing the test, bring the arrow to EXIT and press the TEST button to return to the Gam Mode. The contents of settings changes in SYSTEM ASSIGNMENTS, COIN ASSIGNMENTS, and GAME TEST MODE are stored when the test mode is EXITed. If the power is turned off before EXITing, the contents of setting changes are ineffective. Be very careful of this point. 1 - 3 GAME TEST MODE (ZOMBIE REVENGE) TEST MENU INPUT TEST SOUND TEST GAME ASSIGNMENTS STICK SETTING BOOKKEEPING BACKUP DATA CLEAR ->EXIT SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON Bring the arrow to the item of GAME TEST MODE in the SYSTEM TEST MENU, and press the Test button to display the TEST MENU peculiar to ZOMBIE REVENGE. Press the SERVICE button to move the arrow. Bring the arrow the desired item and press the TEST button. Upon finishing the test, bring the arrow to EXIT and press the TEST button to return to the SYSTEM MENU MODE. 2 1 - 4 INPUT TEST This test displays the state of each switch. If this switch goes ON when activated, it is satisfactory. Display varies depending on the JOYSTICK TYPE setting in (3) GAME ASSIGNMENTS. INPUT TEST START1 SW_SHOT 10 SW_SHOT 11 SW_SHOT 12 :OFF :OFF :OFF :OFF START2 SW_SHOT 20 SW_SHOT 21 SW_SHOT 22 :OFF :OFF :OFF :OFF START1 SW_SHOT 10 SW_SHOT 11 SW_SHOT 12 INPUT TEST :OFF :OFF :OFF :OFF START2 SW_SHOT 20 SW_SHOT 21 SW_SHOT 22 :OFF :OFF :OFF :OFF TEST-SW :OFF 1P UP - DOWN 1P LEFT - RIGHT 2P UP - DOWN 2P LEFT - RIGHT SERVICE-SW (VOLUME_0) (VOLUME_1) (VOLUME_4) (VOLUME_5) :OFF :80 :80 :80 :80 SW_UP1 :OFF SW_DOWN1 :OFF SW_LEFT1 :OFF SW_RIGHT1 :OFF TEST-SW :OFF SW_UP2 :OFF SW_DOWN2 :OFF SW_LEFT2 :OFF SW_RIGHT2 :OFF SERVICE-SW :OFF PRESS TEST BUTTON TO EXIT PRESS TEST BUTTON TO EXIT 1P (2P) UP-DOWN shows the minimum value when the Stick is inclined downward, and the maximum value when the Stick is inclined upward. 1P (2P) LEFT-RIGHT sows the minimum value when the Stick is inclined to the right, and the maximum when the Stick is inclined to the left. When the Stick is untouched, the CENTER value is displayed. If each of the center, minimum, and maximum value is within range of 70-8F,00-0F, and F0-FF respectively, it is satisfactory. If the value is not satisfactory, return to the MENU mode, make adjustment in (4) STICK SETTING, and reconfirm the value in this test. Press the test menu to have the MENU return onto the screen. 1 - 5 SOUND TEST This allows sound and background used in the game to be checked/ tested. SOUND TEST Pressing the service button increase the number by one and changes the sound. Press the TEST button to have the MENU return to the BGM : 00 screen. SELECT WITH SERVICE BUTTON PRESS TEST BUTTON TO EXIT 3 1 - 6 GAME ASSIGNMENTS GAME ASSIGNMENTS Allows game difficulty adjustments to be performed/ changed. SELECTION OF DESIRED ITEM JOYSTICK TYPE GAME DIFFICULTY MAX LIFE VIOLENCE MODE ->EXIT DIGITAL NORMAL 256 OFF 1.) Press the SERVICE button to move the -> and bring it to the desired item. 2.) Press the TEST btuuon to change the seting. 3.) Afte the device seting is finished, bring the -> to EXIT and press the TEST button. SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON TO EXIT (A) JOYSTICK TYPE (ANALOG, DIGITAL (NORMAL)) This allows the Control Panel's JOYSTICK TYPE to be selected. (B) GAME DIFFICULTY (VERY EASY, EASY, MEDIUM EASY, NORMAL, BITS HARD, MEDIUM HARD, HARD, VERY HARD) (C) MAX LIFE (128, 256, 384, 512) Sets the characteer's "LIFE" value. (D) VIOLENCE MODE (OFF, ON) Sets the blood color to ON (red) or OFF(green). This item is displayed for the USA version only and not for EXPORT, KOREA, AUSTRALIA versions. 4 1 - 7 STICK SETTING If the JOSTICK TYPE is set to DIGITAL in (3) GAME ASSIGNMENTS, the ANALOG STICK volume can be adjusted. NEW JAMMA ANALOG MIN 00 CENTER 80 MAX FF 1P UP - DOWN: (VOLUME 0) 1P LEFT - RIGHT: (VOLUME 1) 20 UP - DOWN: (VOLUME 4) 20 LEFT - RIGHT: (VOLUME 5 ) 00 80 FF 00 80 FF 00 80 FF PRESS TEST BUTTON TO EXIT ADJUSTING THE VOLUME VALUE Starring from the untouched status of 1P (2P) DIGITAL STICK, adjust the Volume value by moving the Stick fully UP/ DOWN/LEFT/RIGHT within the maximum movable ranges. There after, the adjustment is finished if the MENU mode returns when the TEST button is pressed in the status and Stick is untouched. After adjustment, be sure to check in (1) INPUT TEST to confirm that the value is satisfactory. If the value is not staisfactory, return to STICK SETTING and adjust the Volume value. If the satisfactory value is not obtained after adjusting several times, then, the STICK may be amlfunctioning. In the case JOYSTICK TYPE is set to DIGITAL, the following is displayed. NEW JAMMA DIGITAL STICK TYPE IS SET DIGITAL!! PRESS TEST BUTTON TO EXIT Press the TEST button to have the MENU return to the screen. 5 1 - 8 BOOKKEEPING This test mode allows each of the CREDIT/TIME/GAME data to be ascertained. BOOKKEEPING GAME REPORT PAGE 1/2 NUMBER OF GAMES 1P GAMES 2P GAMES NUMBER OF CONTINUE 1P GAMES 2P GAMES TOTAL COIN COIN CREDIT SERVICE CREDIT TOTAL CREDIT TOTAL TIME PLAY TIME AVERAGE PLAY TIME LONGEST PLAY TIME SHORTEST PLAY TIME 0 0 0 0 0 0 0 0 0 0 0D 0D 0D 0D 0D 0H 0H 0H 0H 0H 0M 0M 0M 0M 0M 0S 0S 0S 0S 0S PRESS TEST BUTTON TO EXIT (A) NUMBER OF GAMES 1P, 2P total game playfrequency. (B) NUMBER OF CONTINUE 1P, 2P continue game playfrequency. (C) TOTAL COIN Total number of times both the COIN CHUTE'S are actuated. (D) COIN CREDIT Number of CREDITS registered by COIN insertion only. (E) SERVICE CREDIT The SERVICE SWITCH usage frequency. (F) TOTAL CREDIT Total number of CREDITS. (G) TOTAL TIME Machine's total actuated time (excluding the test performance time). (H) PLAY TIME Displays total game play time. (I) AVERAGE TIME Average Game play time. (J) LONGEST TIME Displays the longest play time. (K) SHORTEST TIME Displays the shortest play time. Press the test button to proceed to the next page. Press the TEST button to have the MENU return to the screen. 6 Page 2/2 displays by-play-time play frequency. BOOKKEEPING TIME HISTOGRAM PAGE 2/2 0M00S ~ 0M29S 0M30S ~ 0M59S 1M00S ~ 1M29S 1M30S ~ 1M59S 2M00S ~ 2M29S 2M30S ~ 2M59S 4M00S ~ 4M29S 4M30S ~ 4M59S 5M00S ~ 5M29S 5M30S ~ 5M59S 6M00S ~ 6M29S 6M30S ~ 6M59S 7M00S ~ 7M29S 7M30S ~ 7M59S 8M00S ~ 8M29S 8M30S ~ 8M59S 9M00S ~ 9M29S 9M30S ~ 9M59S OVER 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 PRESS TEST BUTTON TO EXIT 1 - 9 BACK UP DATA CLEAR Clears the contents of BOOKKEEPING. BACK UP DATA CLEAR YES (CLEAR) ->NO (CANCEL) SELECT WITH SERVICE BUTTON AND PRESS TEST BUTTON TO EXIT When clearing bring-> to YES and when not clearing, to NO, by using the SERVICE SW and then push the TEST button. When clearing has been finished, COMPLETED will be dislayed. Pressing the TEST button will have the MENU return to the screen. 7 2. GAME BOARD Ensure that the DIP SW setting is performed as designated. Failure to observe this may cause functioning not suitable for the operation, or malfunctioning. 2 -1 COMPOSITION OF GAME BOARD ASSY CASE NAO USA (840-0003D-01) : ZOMBIE USA DIP SW SETTINGS 8 3. PARTS LIST STICKERS AND GRAPHICS ITEM NO. 1 2 3 4 5 6 PART NO. 999-0777 999-0779 999-0780 999-0785 999-0786 999-0787 DESCRIPTION MARQUEE GRAPHIC ZBX KIT INSTRUCTION SHEET ZBX KIT SUB INSTR SHEET ZBX KIT CNTRL PNL OVERLAY ZBX KIT STICKER CABI SIDE L ZBX KIT STICKER CABI SIDE R ZBX KIT JOYSTICKS AND BUTTONS ITEM NO. 1 2 3 4 PART NO. 610-6723-4C01 58-9133-L 58-9155-L 95-0733-01 DESCRIPTION ASSY ANALOG JOY 4C GREEN *PUSH BUTTON GREEN *PUSH BUTTON YELLOW *MICRO SWITCH SILVER CONTACT KIT INSTALLATION INSTRUCTIONS 1.) Install VGA Output to Jamma Interface. 2.) Install USB connector to Naomi Filter Board Port. 3.) You can use one of the extra grounds (shown in the picture on the following page) to go out to switched inputs. (The 5V and 12V can be used for whatever you like-coin meter, etc.) MONITOR INFORMATION You can use a Standard Resolution-15,750K x 60 (#1 ON & #2-4 OFF) or High Resolution-31,000K x 10 (#1-4 OFF) DIP SWITCH SELECTABLE (Switch #1 on NAOMI FILTER BOARD) 9 I/O Board XFMR 120V 17v2Ax2 560-5407 POWER AMP 2 CH 838-13616 GAME BD ZOMBIE NAO 840-0003D-01 838-13683 SW REGU FOR JVS 400-5397 CONTENTS OF WIRING BAG SEEN ABOVE 120 VAC in SPEAKER 1 VGA Output to Jamma Interface *12V Output (RED) *Logic Ground (WHITE) SPEAKER 2 *5V Output (YELLOW) *(USED FOR METER, COINDOOR, LIGHTS, ETC.) 5k pot (sound) 1=WHITE/RED 3 21 2=GREEN/RED 3=YELLOW/RED 10 Come see SEGA ENTERPRISES' Service Department Homepage