User manual CANON EOS 5D - DIGITAL PHOTO PROFESSIONAL INSTRUCTION MANUAL WINDOWS (EOS 5D)

Digital Photo Professional Instruction Manual Canon Utilities Digital Photo Professional Ver.2.0 Cover/Table of Contents Table of Contents Introduction Introduction Displaying Thumbnail Images and Performing Basic Edits in the Main Window 1 Compatible Models EOS-1D Mark II N EOS-1Ds Mark II EOS-1D Mark II EOS-1Ds EOS-1D EOS 5D EOS DIGITAL REBEL XT/350D DIGITAL EOS 20D EOS DIGITAL REBEL/300D DIGITAL EOS 10D EOS D60 EOS D30 PowerShot Pro1 Displaying Thumbnail Images and Performing Basic Edits in the Main Window Performing Detailed Edits in the Edit Window Performing Detailed Edits in the Edit Image Window Displaying an Image in the Quick Check Window Reference 2 3 4 5 Performing Detailed Edits in the Edit Window Performing Detailed Edits in the Edit Image Window Displaying an Image in the Quick Check Window Reference 1 2 3 4 5 Index Index CT1-7133DPPWE-000 © CANON INC. 2005 READ CAREFULLY BEFORE USING! CANON SOFTWARE LICENSE AGREEMENT IMPORTANT - READ THIS AGREEMENT BEFORE USING THE SOFTWARE ON THE CDROM IN THIS BOX. BY USING THE SOFTWARE, YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT. This is a license agreement (the [Agreement]) between you and Canon Inc. ([Canon]). IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT, DO NOT USE THE SOFTWARE PROGRAM ON THE CD-ROM AND THE USER MANUAL IN THIS BOX (COLLECTIVELY, THE [SOFTWARE]) AND RETURN THE SOFTWARE WITHIN 30 DAYS FROM THE DATE OF PURCHASE TO YOUR POINT OF PURCHASE FOR A REFUND. In consideration of the right to use the SOFTWARE, you agree to abide by the terms and conditions of this Agreement. 1. LICENSE: Canon grants you the non-exclusive right to use the SOFTWARE only on a single computer. You may physically transfer the SOFTWARE from one computer to another provided that the SOFTWARE is used on only one computer at a time. You shall not install or use the SOFTWARE on a network, multiple CPU, multiple site arrangement, or any other hardware configuration where the SOFTWARE is accessible to more than one CPU or to more than one user. YOU SHALL NOT ASSIGN, SUBLICENSE, RENT, LEASE, LOAN, CONVEY OR OTHERWISE USE, TRANSFER, COPY, TRANSLATE, CONVERT TO ANOTHER PROGRAMMING LANGUAGE, ALTER, MODIFY, DECOMPILE OR DISASSEMBLE THE SOFTWARE, IN WHOLE OR IN PART, EXCEPT AS EXPRESSLY PROVIDED IN THIS AGREEMENT. 2. BACK-UP COPY: You may make one copy of the SOFTWARE solely for back-up purposes, or copy the SOFTWARE onto the permanent storage device (e.g. a hard disk) of your computer and retain the original for back-up purposes. Any other copying of the SOFTWARE is a violation of this Agreement. You must reproduce and include the copyright notice on the back-up copy. 3. SUPPORT AND UPDATES: Canon is not responsible for providing maintenance or support for use of the SOFTWARE. No updates, fixes or support will be made available for the SOFTWARE. 4. LIMITED WARRANTY AND LIMITATION OF LIABILITY: It is your responsibility to choose, maintain and match the hardware and software components of your computer system. Thus Canon does not guarantee uninterrupted service or correction of errors or that the functions or performance of the SOFTWARE will meet your requirements. THE SOFTWARE IS LICENSED ON AN [AS IS] BASIS AND WITHOUT WARRANTY OF ANY KIND. The CDROM storing the SOFTWARE is warranted only against defective material under normal use for a period of ninety (90) days after purchase from an authorized Canon dealer as evidenced by your sales receipt. Your sole remedy for a defective CD-ROM shall be replacement of the same without charge when returned by you at your expense to your point of purchase and proven to be defective upon inspection. The replacement CD-ROM will be warranted for the remainder of the original ninety (90) day warranty period of the defective CD-ROM. The limited warranty does not apply if the failure of the CD-ROM resulted from accident, abuse or misapplication of the SOFTWARE and shall not extend to anyone other than the original user of the SOFTWARE. EXCEPT AS SPECIFICALLY SET FORTH IN THIS PARAGRAPH 4, CANON, CANON'S SUBSIDIARIES, DISTRIBUTORS AND DEALERS DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE SOFTWARE. NEITHER CANON NOR ANY OF CANON'S SUBSIDIARIES, DISTRIBUTORS OR DEALERS IS LIABLE FOR ANY DAMAGES HOWSOEVER CAUSED, INCLUDING WITHOUT LIMITATION, DIRECT, CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE INCLUDING LOSS OF PROFITS, EXPENSE OR INCONVENIENCE HOWSOEVER CAUSED OR ARISING OUT OF THE SOFTWARE OR THE USE THEREOF. NEITHER CANON, NOR ANY OF CANON'S SUBSIDIARIES, DISTRIBUTORS OR DEALERS SHALL HAVE ANY OBLIGATION TO INDEMNIFY YOU AGAINST ANY CLAIM OR SUIT BROUGHT BY A THIRD PARTY ALLEGING THAT THE SOFTWARE OR THE USE THEREOF INFRINGES ANY INTELLECTUAL PROPERTY OF SUCH THIRD PARTY. 5. TERM: This Agreement is effective upon your using the SOFTWARE and remains in effect until expiration of all copyright interests in the SOFTWARE unless earlier terminated. You may terminate this Agreement by destroying the SOFTWARE. This Agreement will also terminate without notice to you if you fail to comply with any of the terms of this Agreement and you must then promptly return the SOFTWARE. In addition, Canon may enforce its other legal rights. 6. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE: The SOFTWARE is provided with restricted rights. Use, duplication or disclosure is subject to restrictions as set forth in either subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer software clause at DFARs 252.227-7013 or subparagraph (c) (1) and (2) of the Commercial Computer Software Restricted Rights Clause at FAR 52.227-19, as applicable. 7. SEVERABILITY: In the event that any provision of this Agreement is declared or found to be illegal by any court or tribunal of competent jurisdiction, such provision shall be null and void with respect to the jurisdiction of that court or tribunal and all the remaining provisions of this Agreement shall remain in full force and effect. 8. CONTROLLING LAW: The terms of this Agreement as it relates to purchases of the Software in the United States of America shall be governed and construed in all respects in accordance with the laws and regulations of the State of New York, without reference to choice of law principles. The terms of this Agreement as it relates to purchases of the Software in Canada shall be governed by the laws of the province of Ontario. 9. OWNERSHIP: All rights, including but not limited to copyrights and trade secret rights, to the SOFTWARE belong to Canon, its affiliated corporations and third party licensors. Your use of the SOFTWARE is subject to the United States, Canada and other applicable copyright and trademark laws and nothing in this Agreement constitutes a waiver of the rights of Canon, its affiliated corporations and third party licensors under such laws. Nothing contained in Paragraph 1 shall be construed to give Canon any ownership rights in any images, graphics or textual material that you save in connection with the Software. 10.ACKNOWLEDGEMENT: BY USING THE SOFTWARE, YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTOOD IT, AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU ALSO AGREE THAT THIS AGREEMENT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF AGREEMENT BETWEEN YOU AND CANON CONCERNING THE SUBJECT MATTER HEREOF AND SUPERSEDES ALL PROPOSALS OR PRIOR AGREEMENTS, VERBAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN THE PARTIES RELATING TO THE SUBJECT MATTER HEREOF. NO AMENDMENT TO THIS AGREEMENT SHALL BE EFFECTIVE UNLESS SIGNED BY A DULY AUTHORIZED OFFICER OF CANON. Cover/Table of Contents Introduction Displaying Thumbnail Images and Performing Basic Edits in the Main Window Performing Detailed Edits in the Edit Window Performing Detailed Edits in the Edit Image Window Displaying an Image in the Quick Check Window Reference 1 2 3 4 5 Index 1 Introduction This chapter includes information on the precautions to be read before using Digital Photo Professional, how to use this Instruction Manual, the system requirements and the supported image types. It also explains the functions and window structure, and gives examples of operation. Click on the item to display its page. Main Features ..................................................................................................................... 0-2 System Requirements........................................................................................................ 0-2 Supported Images .............................................................................................................. 0-2 Function Window Configuration ....................................................................................... 0-3 Example of Operation ........................................................................................................ 0-4 Cover/Table of Contents Introduction Displaying Thumbnail Images and Performing Basic Edits in the Main Window About This Manual Thank you for purchasing this Canon product. Precautions for using this product safely and icons to help you with procedures, etc. are described at the beginning of this Instruction Manual. Please be sure to read these first before proceeding to the information in the other chapters. It is prohibited to reproduce, in whole or part, the contents of this Instruction Manual without permission. Canon may change without notice the software specifications and contents of this Instruction Manual. The software screens and displays printed in this Instruction Manual may differ slightly from the actual software. The content of this Instruction Manual has been reviewed thoroughly. However, if you should notice any errors or omissions, please contact a Canon Service Center. Please note that irrespective of the above-mentioned, Canon does not take responsibility for the outcome of the operation of the software. Adobe and Photoshop are registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Other names and products not mentioned above may be registered trademarks or trademarks of their respective companies. How to Read the Manual and the Conventions Used In this manual, Windows XP Professional/Home Edition is referred to as "Windows XP", and Windows 2000 Professional is referred to as "Windows 2000". In this manual, the screens used in the examples are from Windows XP. In this document, square brackets [ ] are used to indicate items such as window names, menu names and button names that appear on the computer screen. Text inside < > in this document indicates the key on the keyboard and camera button names. Asterisk in (p. *-*) in this document shows reference pages. in this document indicates the sequence of operation as shown on the right. Example: [View] menu [Sort] [File name] The explanations given below describe the type of content indicated by the respective icons. : Marks information that should be read before use to prevent problems that would interfere with the functioning of software and computer. : Marks additional information that you will find helpful. Click any of the chapter content buttons at the right of the Instruction Manual to display the front page of each chapter. Clicking the buttons on the bottom right of the Instruction Manual allows you to move as follows: : Displays the previous page. : Displays the next page. : Returns to the previously displayed page. Performing Detailed Edits in the Edit Window Performing Detailed Edits in the Edit Image Window Safety Precautions Please read the safety precautions carefully before using this product. Ensure that you use the product correctly according to the procedures described in these instructions. The following safety precautions are intended to instruct you in the safe and correct operation of the product and its accessories to prevent injuries or damage to yourself, other persons and property. Please read and ensure that you understand them before you proceed to the other sections of these instructions. Warning Do not play the supplied CD-ROM(s) in any CD-ROM Player that does not support data CD-ROMs. The extremely loud sound that may result from playing the CD-ROM(s) in an audio CD player (music player) could damage the speakers. It is also possible to suffer hearing losses from listening with headphones to the loud sounds of a data CD-ROM played on a music CD player. Displaying an Image in the Quick Check Window Reference 1 2 3 4 5 Index Trademark Acknowledgments Canon and EOS are trademarks of Canon Inc. IBM is a registered trademark of International Business Machines Corporation. Microsoft and Windows are registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. 0-1 Main Features Digital Photo Professional (DPP) software is designed for editing RAW images shot with Canon digital cameras and has the following features and functions to meet the requirements of professional and high-end amateurs who mainly shoot RAW images. High-speed processing of RAW images DPP has made possible, using Canon's own high performance algorithm, high-speed processing and high-speed display of RAW images. DPP, Canon's genuine software, has made possible high-image quality processing. Together with Easy-PhotoPrint and Canon BJ printers, DPP can print compatible images including RAW images simply and in high quality. DPP can convert and save RAW images as TIFF or JPEG images and attach an ICC profile. DPP can convert and save a batch of multiple RAW images (batch processing). DPP can change a batch of file names (rename function). Together with EOS Capture, DPP is compatible with remote shooting. Cover/Table of Contents Color management DPP is compatible with Color Management System. DPP is compatible with 5 kinds of color space (sRGB, Adobe RGB, Wide Gamut RGB, Apple RGB, ColorMatch RGB). DPP can attach ICC profiles to a saved image. DPP can set monitor and printer profiles. With the CMYK simulation function, DPP can simulate the color of an image when printed with a printer, etc. in a CMYK environment. Introduction Displaying Thumbnail Images and Performing Basic Edits in the Main Window Operation and window variety that can respond to a professional's workflow DPP's operation is easy, compatible with the workflow of a professional, and has a variety of function windows. In the main window, images can be displayed as a list (thumbnail image display), selected, rearranged, and basic editing can be performed. In the edit image window, one of multiple images can be selected and enlarged, checked, and detailed editing can be performed. In the edit window, one image can be enlarged, checked, and detailed editing can be performed. In the quick check window, images can be displayed one after the other, checked and selected. System Requirements OS Computer CPU RAM Hard disk space Display Performing Detailed Edits in the Edit Window Windows XP (Professional/Home Edition), Windows 2000 Professional PC with one of the above OS preinstalled * Upgraded machines not supported 750MHz Pentium III or higher Minimum 512MB 256MB or more Screen resolution: 1024 × 768 pixels or more Color quality: Medium (16 bit) or more Real-time image editing DPP has various image editing functions where the results of editing are reflected in an image in real-time. You can adjust all image editing functions with 16 bit high precision. DPP can perform various kinds of image editing with the RAW image adjustment function that is richer and has a larger degree of freedom than the image adjustment features of the camera. It also has the RGB image adjustment function that can edit RAW images and RGB images (JPEG images, TIFF images). There is almost no image deterioration of RAW images edited with the RAW image adjustment function. RAW image adjustment features: Brightness adjustment, white balance adjustment, Picture Style setting RAW image and RGB image (JPEG images, TIFF images) adjustment features: Tone curve adjustment, color adjustment, sharpness, trimming, image correction (repair, copy stamp), image rotation (90° to the left or right). DPP can save, import or apply recipe data (results of various adjustments made to an edited image) to other images. The before and after editing comparative display function allows you to compare and adjust an image displayed in a window showing the before and after versions. Performing Detailed Edits in the Edit Image Window Supported Images This software supports the following image types. Image type/ Camera used EOS-1D Mark II N, EOS-1Ds Mark II, EOS-1D Mark II, EOS 5D, EOS DIGITAL REBEL XT/350D DIGITAL or EOS 20D RAW images EOS-1Ds, EOS-1D EOS DIGITAL REBEL/300D DIGITAL, EOS 10D, EOS D60, EOS D30 or PowerShot Pro1* JPEG images TIFF images Exif 2.2 or 2.21-compatible JPEG or JFIF images Exif-compatible TIFF images Extension .CR2 .TIF .CRW .JPG, .JPEG .TIF, .TIFF Displaying an Image in the Quick Check Window Reference 1 2 3 4 5 Index A diversity of functions DPP can select and organize images using 3 kinds of check marks. DPP can send one image to Photoshop or a batch of multiple images to optional image editing software. DPP can print single copies of compatible images including RAW images. *You cannot edit with the Digital Photo Professional RAW image editing function. 0-2 Function Window Configuration Digital Photo Professional comprises the windows and function windows shown below, centering on the main window that is displayed when DPP starts up. Cover/Table of Contents Main window Images can be displayed as thumbnails, and basic image editing can be performed (p.1-2). The size of images and the way images are displayed can be changed or images can be sorted according to a selected condition (p.1-5). Images can be sorted and organized using 3 kinds of check marks (p.1-2). For RAW images, white balance and brightness can be adjusted, and color space can be set (p.1-6 to p.1-9). RAW, JPEG and TIFF images can be rotated and brightness adjusted (p.1-2, p.1-9). RAW images can be converted into JPEG and TIFF images, and edited images can be saved as separate images* (p.1-15). Images (including RAW images) can be printed* (p.1-19). All settings for Digital Photo Professional can be made* (p.1-20). Doubleclick Edit window An image selected in the main window can be enlarged and displayed in a separate window. Also, you can display up to 36 edit windows to compare and edit images (p.2-2). The size of images and the way images are displayed can be changed, or a comparison of an image before and after editing can be displayed (p.2-3). For RAW images, brightness and white balance can be adjusted, and Picture Style can be set (p.2-3 to p.2-6). Tone curve and color can be adjusted for RAW, JPEG and TIFF images (p.2-6 to p.2-8). Introduction Displaying Thumbnail Images and Performing Basic Edits in the Main Window * This can also be done in the edit window and the edit image window. Quick check window Tools menu Switch Edit image window Button or menu One image can be selected from multiple images and detailed editing can be performed (p.3-1). The size of images and the way images are displayed can be changed, or a comparison of an image before and after editing can be displayed (p.2-3). For RAW images, brightness and white balance can be adjusted, and Picture Style can be set (p.2-3 to p.2-6). Tone curve and color can be adjusted for RAW, JPEG and TIFF images (p.2-6 to p.2-8). Images selected in the main window can be quickly displayed in a separate window and viewed (p.4-1). Images can be sorted and organized using 3 kinds of check marks (p.4-1). Performing Detailed Edits in the Edit Window Performing Detailed Edits in the Edit Image Window Rename window A batch of file names can be changed (p.1-17). Tools menu Tools menu Displaying an Image in the Quick Check Window Window for batch conversion and saving of images (batch processing) A batch of multiple RAW images can be converted and saved to JPEG or TIFF images, and a batch of edited images can be saved as separate images (p.1-16). Importing images from EOS Capture With EOS Capture, images shot remotely can be displayed (p.1-19). Trimming window Transferring images to image editing software Multiple images can be transferred to optional image editing software (p.1-18). An image can be trimmed within your desired range (p.1-10). Copy Stamp window Printing with Easy-PhotoPrint Images can be printed together with EasyPhotoPrint on Canon BJ printers (p.1-19). Transferring an image to Adobe Photoshop One image can be transferred to Adobe Photoshop (p.1-18). An image can be corrected so that unwanted spots in the image blend with surrounding color (p.1-11). An image can be corrected by pasting a section copied from another part of the same image to an unwanted part of the image (p.1-12). Reference 1 2 3 4 5 Index 0-3 Example of Operation The following shows typical flows of operating Digital Photo Professional. Cover/Table of Contents Example 3: Performing Detailed Edits on a Single Image in the Edit Window Start up Digital Photo Professional (p.1-2). Example 1: Displaying Thumbnail Images and Performing Basic Edits in the Main Window Start up Digital Photo Professional (p.1-2). Example 2: Selecting One Image from Multiple Images and Performing Detailed Edits on the Image in the Edit Image Window Start up Digital Photo Professional (p.1-2). Introduction Displaying Thumbnail Images and Performing Basic Edits in the Main Window Display images in the main window (p.1-2). Set check marks (p.1-2). Select multiple images in the main window (p.1-2). Select an image in the main window (p.1-2). Switch to the edit image window (p.3-1). Sort images (p.1-5). Select one image from multiple images (p.3-1). Select an image and perform basic edits (p.1-6, p.1-9). Print the images (p.1-19). Transfer images to image editing software (p.1-18). Save edits (recipe data) to the image (p.1-13). Convert and save edited images as separate images in a single operation (p.1-16). Edit the image (p.2-3, p.2-6) . Display the image as a comparison of before and after editing (p.2-3). Print the image (p.1-19). Transfer images to image editing software (p.1-18). Save edits (recipe data) to the image (p.1-13). Convert and save edited images as separate images in a single operation (p.1-16). Display the image in the edit window (p.2-2). Edit the image (p.2-3, p.2-6). Display the image as a comparison of before and after editing (p.2-3). Print the image (p.1-19). Transfer an image to Photoshop (p.1-18). Performing Detailed Edits in the Edit Window Save edits (recipe data) to the image (p.1-13). Convert and save the edited image as a separate image (p.1-15). Performing Detailed Edits in the Edit Image Window Example 4: Checking Images in the Quick Check Window Start up Digital Photo Professional (p.1-2). Example 5: Applying the Editing Data (recipe data) of an Edited Image to Another Image Start up Digital Photo Professional (p.1-2). Example 6: Remote Shooting with EOS Capture Connect the camera to your computer and turn the camera on. Displaying an Image in the Quick Check Window Select multiple images in the main window (p.1-2). Select the edited image in the main window (p.1-2). Start up Digital Photo Professional (p.1-2). Reference Display the images in the quick check window (p.4-1). Copy the editing data (recipe data) (p.1-13). Switch to the main or edit image window (p.1-2, p.3-1). 1 2 3 4 5 Check the images. Set a check mark to an image (p.4-1). Select the image to which the editing data will be applied in the main window. Start up EOS Capture (p.1-19). Index Apply the editing data to the selected image (p.1-13). Take a shot by clicking the [Shoot] button in EOS Capture or pressing the shutter button on the camera. Check the image, which is displayed in the main or edit image window. 0-4 1 Displaying Thumbnail Images and Performing Basic Edits in the Main Window Using Edits (Recipe Data)................................................................................ 1-13 Saving the Recipes ........................................................................................ 1-13 Loading and Pasting Recipes ........................................................................ 1-13 Copying Recipes and Applying to Other Images ........................................... 1-13 Reverting Edited Images to Their Original Condition ................................... 1-14 Reverting to Last Saved Settings................................................................... 1-14 Reverting to Shot Settings ............................................................................. 1-14 Saving Edited Images ...................................................................................... 1-14 Saving by Overwriting .................................................................................... 1-14 Saving and Renaming.................................................................................... 1-14 Adding a Thumbnail of the Image .................................................................. 1-14 Converting and Saving RAW Images while Renaming Them........................ 1-15 Converting and Saving Images in a Single Operation (Batch-processing) .... 1-16 Changing File Names in a Single Operation .................................................. 1-17 Transferring Images to Image Editing Software............................................ 1-18 Transferring One Image to Photoshop........................................................... 1-18 Transferring Multiple Images to Image Editing Software ............................... 1-18 Printing Images ................................................................................................ 1-19 Printing with Easy-PhotoPrint ........................................................................ 1-19 Displaying Images in EOS Capture................................................................. 1-19 Specifying Preferences.................................................................................... 1-20 Cover/Table of Contents This chapter describes the functions of the main window, and how to display images and perform basic edits on them. Click on the item to display its page. Introduction Displaying Thumbnail Images and Performing Basic Edits in the Main Window Starting up Digital Photo Professional............................................................. 1-2 Displaying Images.............................................................................................. 1-3 Handling the Folders.......................................................................................... 1-4 Creating a New Folder ..................................................................................... 1-4 Registering Frequent Use Folders with the Bookmark .................................... 1-4 Organizing Bookmarks..................................................................................... 1-4 Copying/Moving an Image ............................................................................... 1-5 Deleting Images.................................................................................................. 1-5 Selecting the Image Display Mode ................................................................... 1-5 Selecting the Thumbnail Size .......................................................................... 1-5 Image with Information Display........................................................................ 1-5 Sorting Images................................................................................................. 1-5 Displaying Image Information .......................................................................... 1-6 Displaying the Edit Window ............................................................................. 1-6 Displaying the Edit Image Window .................................................................. 1-6 Displaying the Quick Check Window ............................................................... 1-6 Editing RAW Images .......................................................................................... 1-6 Adjusting the White Balance ............................................................................ 1-6 Click White Balance Function .......................................................................... 1-8 Adjusting the Brightness .................................................................................. 1-9 Specifying Color Space.................................................................................... 1-9 Editing Images.................................................................................................... 1-9 Adjusting the Brightness .................................................................................. 1-9 Trimming an Image ........................................................................................ 1-10 Correcting an Image ...................................................................................... 1-11 Performing Detailed Edits in the Edit Window Performing Detailed Edits in the Edit Image Window Displaying an Image in the Quick Check Window Reference 1 2 3 4 5 Index 1-1 Starting up Digital Photo Professional Double-click the [Digital Photo Professional] icon on the desktop. The main window is displayed. Alternatively, you can start up Digital Photo Professional by clicking the [Start] button select [All Programs] ([Programs] in Windows 2000) [Canon Utilities] [Digital Photo Professional] [Digital Photo Professional]. Selects and sets one from the 3 check marks to the selected image. Cover/Table of Contents Main Window Introduction Toolbar Removes all the check marks of the selected images. Rotates the selected image 90° to the left or right. Adjusts the white balance of a RAW image (p.1-6). All the selected images in the image display area are deselected. Selects all the images in the image display area. The path for the folder selected in the folder area is displayed. Displaying Thumbnail Images and Performing Basic Edits in the Main Window Menu bar Displays the [File], [Edit], [View], [Bookmark], [Adjustment], [Tools], [Window], and [Help] menus. The main window switches to the edit image window (p.1-6, p.3-1). Displays/hides the folder area. Saves all the images in a single operation (p.1-16). Adjusts the brightness of a RAW image (p.1-9). Adjusts a RAW image with click white balance (p.1-8). Performing Detailed Edits in the Edit Window Folder area The images in the selected folder are displayed in the image display area. Performing Detailed Edits in the Edit Image Window Image display area Displaying an Image in the Quick Check Window Displays the coordinates of the cursor position and the RGB values (8-bit conversion) of an image while operating the click white balance (p.1-8). Displays whether or not recipe data (p.1-13) is attached to the selected image. When you set CMYK simulation profile (p.1-21), [CMYK] is displayed. Displays the number of the currently selected images. Displays the total number of images. Reference 1 2 3 4 5 To select an image, click the target image. To select multiple images, hold down the key and click the images. To select sequential images, click the first image and then hold down the key and click the last image. To select RAW images only or images that have check marks set only, select the [Edit] menu [Select RAW photos only] or [Select check mark* photos only]. (* represents a check mark number from 1 to 3.) To display or hide the toolbar, select the [View] menu To exit Digital Photo Professional, select [File] menu [Toolbar]. [Exit]. Index For information on shortcut keys, refer to the "Shortcut List" (p.5-2). 1-2 Displaying Images Information Displayed with Images The following shows the information displayed when [Large thumbnail] (p.1-5) is selected. This mark is displayed for images being trimmed (p.1-10). You can display images saved on your computer in the main window. Cover/Table of Contents Click the folder in which images are saved. This mark is displayed when a check mark is set (p.1-2, p.4-1). This mark is displayed for an image that has been corrected with the copy stamp tool (p.1-11, p.1-12). Introduction Displaying Thumbnail Images and Performing Basic Edits in the Main Window This value is displayed for RAW images for which the brightness was adjusted (p.1-9). The aperture value used when images were shot is displayed. The icon for the specified white balance is displayed with RAW images only (p.1-7). The shutter speed used when images were shot is displayed. This mark is displayed for images for which the RGB processing (p.1-9, p.2-6) was performed. File name This mark is displayed for unsaved images being edited. You cannot display images saved on a memory card in the camera. You must save images to your computer using other software supplied with the camera or a third-party card reader. A JPEG image set to Adobe RGB and taken with the EOS 10D, EOS DIGITAL REBEL/ 300D DIGITAL or PowerShot Pro1 may display with the sRGB color space applied. Refer to "Supported Images" for information about the images that can be displayed (p.0-2). Images that cannot be displayed appear as [ ]. Images that were shot with the camera held vertically with [Auto rotate] setting to are automatically displayed vertically. You can display images saved on a memory card using a third-party card reader. Performing Detailed Edits in the Edit Window The [RAW] symbol is displayed for RAW images. (When [Small thumbnail] is selected, the [R] symbol is displayed). No symbol is displayed for JPEG and TIFF images. Performing Detailed Edits in the Edit Image Window The [RAW] mark is not displayed for PowerShot Pro1 RAW images. Displaying an Image in the Quick Check Window Reference 1 2 3 4 5 Index 1-3 Handling the Folders You can handle the folder on the menu that appears by right-clicking the folder. Right-click on the folder and select an option from the menu that appears. You can drag and drop folders in the folder area to move them to the other folders. You can also copy the folders by dragging and dropping them while holding down the key. Registering Frequent Use Folders with the Bookmark You can register frequent use folders with the [Bookmark] menu. Cover/Table of Contents 1 2 Select a folder in the folder area. Introduction Displaying Thumbnail Images and Performing Basic Edits in the Main Window Select [Bookmark] menu [Add]. The selected folder is registered with the [Bookmark] menu. The registered folder can be selected from the [Bookmark] menu. Organizing Bookmarks You can change the name of the folder or delete the folder that was registered with the [Bookmark] menu. Creating a New Folder You can create a new folder in the folder area. 1 2 Select [Bookmark] menu [Organize]. Performing Detailed Edits in the Edit Window The [Sort bookmarks] dialog box appears. Change the folder name or delete the folder. The path and name of the folder that is selected in the bookmark folder area is displayed. Performing Detailed Edits in the Edit Image Window 1 2 3 In the folder area, select the location where the new folder is to be created. Select the [File] menu [Create new folder]. The folder path that is selected in the bookmark folder area is displayed. Displaying an Image in the Quick Check Window The [Create new Folder] dialog box appears. Bookmark folder area Enter a folder name. The folder is created. Reference 1 2 3 4 5 To change the folder name, select the folder in the bookmark folder area, change the displayed folder name, and then click the [Change] button. To delete the folder, select the folder in the bookmark folder area, then click the [Delete] button. Index 3 Click the [Close] button. 1-4 Selecting the Image Display Mode Copying/Moving an Image You can copy and save or move an image to another folder. You can change the size or method and sort images according to a selected condition. Selecting the Thumbnail Size The available image sizes are [Large thumbnail], [Middle thumbnail], and [Small thumbnail]. Various information (p.1-3) is displayed in the display frame. Cover/Table of Contents 1 2 3 4 1 2 3 Select the image to be copied or moved. Select the [Edit] menu The image is copied or cut. Introduction Displaying Thumbnail Images and Performing Basic Edits in the Main Window Select [View] menu [Copy] or [Cut]. Select the size to be set. The images are displayed in the selected size. Select the folder to which the image is to be saved or moved. Select the [Edit] menu [Paste]. Image with Information Display You can display the brightness histogram and the shooting information for images. Select [View] menu [Thumbnail with information]. The image is copied or moved to the selected folder. The images with attached information are displayed. Deleting Images You can move unnecessary images to the Recycle Bin on your computer and delete them. Sorting Images You can sort images according to a condition you select. Performing Detailed Edits in the Edit Window Select images and then select [File] menu The [Confirm File Delete] dialog box appears. [Delete]. Select [View] menu [File name] [RAW priority] [Sort] Select the condition to be set. a to z). The images are sorted according to the selected condition. : File names are sorted in alphanumeric order (0 to 9 : Displayed in the following order: RAW images (CR2 CRW TIF) RGB images (JPG TIF) If multiple images have the same extension, they are sorted in order of [File name]. : Displayed in the following order: check-marked images with selected number check-marked images with other numbers images without check marks If multiple images have the same check mark number, they are sorted in order of [File name]. Performing Detailed Edits in the Edit Image Window If you select multiple images, the [Confirm Multiple File Delete] dialog box appears. Click the [Yes] button. The images are moved to the Recycle Bin. Displaying an Image in the Quick Check Window Select [Empty Recycle Bin] from the menu that appears by rightclicking [Recycle Bin] on the desktop. The images are deleted. Images that you deleted in step 3 cannot be restored. Check carefully before deleting images. When multiple images are selected, all the selected images will be deleted. Take particular care when you have just finished a task involving the selection of multiple images. [Check mark1] [Check mark2] [Check mark3] Reference [Shooting Date/Time] : Sorted by shooting date and time. If multiple images were taken on the same date and time, they are sorted in order of [File name]. 1 2 3 4 5 In addition to [CRW_YYYY.CRW] (RAW images) and [IMG_YYYY.JPG] (JPEG images), [CRW_YYYY.THM] (images for displaying camera indexes) is saved in the folder [xxxCANON] where images you have taken with the EOS 10D, EOS DIGITAL REBEL/ 300D DIGITAL, EOS D60, EOS D30 and PowerShot Pro1 are saved. With Digital Photo Professional, [CRW_YYYY.THM] images are not displayed and therefore you cannot move or delete them. Move or delete [CRW_YYYY.THM] images on the Explorer. [xxx] of folder names and [YYYY] of image names represent a number. Index 1-5 Editing RAW Images Displaying Image Information You can check various information for images. You can perform various edits on the RAW images that are supported by Digital Photo Professional. With RAW image editing (p.1-6 to p.1-9), there is hardly any of the deterioration which accompanies image editing. You can therefore edit an image multiple times while preserving the image quality at the time the image was shot. Cover/Table of Contents Select an image and then select [File] menu The image information appears. Clicking the [Close] button closes the dialog box. [Info]. Image information may not appear for JPEG images set to Adobe RGB and shot with the EOS 10D, EOS DIGITAL REBEL/300D DIGITAL or PowerShot Pro1. 1 2 3 Select a RAW image. Introduction Displaying Thumbnail Images and Performing Basic Edits in the Main Window Edit the RAW image (p.1-6 to p.1-9). You can apply edits to other images by copying and pasting the edit data to the other images (p.1-13). You can revert edited images to the last saved settings or shot settings (p.1-14). Displaying the Edit Window You can enlarge the image and perform detailed edits. Save the edited image (p.1-14). Double-click an image. The edit window appears. See Chapter 2 "Performing Detailed Edits in the Edit Window" for the information on the edit window. You cannot edit PowerShot Pro1 RAW images. Before exiting Digital Photo Professional, you must save the edited images (p.1-14). When multiple images are selected, the edits are applied to all the selected images. The editing data can be saved in a separate file (p.1-13). The edited images can be transferred to image editing software (p.1-18). Performing Detailed Edits in the Edit Window Displaying the Edit Image Window You can select one image from multiple images and perform detailed edits. Performing Detailed Edits in the Edit Image Window Adjusting the White Balance You can set the white balance with each method. Select multiple images and then click the [Edit image window] button. The main window switches to the edit image window. See Chapter 3 "Performing Detailed Edits in the Edit Image Window" for the information on the edit image window. 1 2 3 Click the [White balance] button (p.1-2). The [White balance adjustment] dialog box appears. Alternatively, you can display this dialog box by selecting [Adjustment] menu Balance]. [White Displaying an Image in the Quick Check Window Adjust the white balance by making each setting (p.1-7, p.1-8). Reference Displaying the Quick Check Window You can individually display images in a larger size and can quickly view and check each image. 1 2 3 4 5 Click the [Close] button. Index Select multiple images and then select the [Tools] menu Quick check tool]. The quick check window appears. [Start See Chapter 4 "Displaying an Image in the Quick Check Window" for the information on the quick check window. 1-6 Selecting the White Balance You can specify the white balance. Specifying the Color Temperature You can specify the color temperature in the range of 2800 to 10000K (in 100K increments). Cover/Table of Contents Select the white balance from the list box. 1 Select [Color temp.] from the list box. Introduction Displaying Thumbnail Images and Performing Basic Edits in the Main Window White Balance Shot settings Auto Daylight Shade Cloudy Tungsten light Details To apply the white balance setting used when the shot was taken. Automatically adjusts the white balance. For sunny daylight outdoors. For shaded areas outdoors. For cloudy or hazy days and during sunset. For tungsten (light bulb) light. Color Temp. K (Kelvin) -- Approx. 3000 to 7000 Approx. 5200 Approx. 7000 Approx. 6000 Approx. 3200 Approx. 4000 Approx. 6000 Approx. 2800 to 10000 -- 2 Adjust an image while viewing it. Performing Detailed Edits in the Edit Window The adjusted value appears. Performing Detailed Edits in the Edit Image Window Drag the slider left or right to adjust the color temperature. Displaying an Image in the Quick Check Window Fluorescent For white fluorescent light. light Flash Color temp. Click white balance When flash is used. You can manually set color temperature for 2800 to 10000K (in 100K increments). Displayed for images on which you performed the click white balance. Reference 1 2 3 4 5 Index 1-7 Adjusting with the Color Wheel You can select a desired color from the color wheel. You can also specify the hue in the range of 0 to 359 (in 1-stop increments), and the saturation in the range of 0 to 255 (in 1-stop increments). Personal White Balance You can apply the personal white balance (p.2-4) that you registered in the edit window or the edit image window to images. Cover/Table of Contents 1 Click the [Tune] button. The color wheel appears. Click the [1], [2] or [3] button. The registered personal white balance is applied to the image. Introduction Displaying Thumbnail Images and Performing Basic Edits in the Main Window You cannot use the personal white balance if you have not registered it. 2 Adjust an image while viewing it. Drag [ ] to adjust an image. Click White Balance Function Makes white the standard for the point you selected and color in the image is adjusted. Performing Detailed Edits in the Edit Window 1 2 You can enter a value or click the [ ] / [ ] buttons to specify the hue and saturation. Click the [Click (RAW)] button (p.1-2). When you move the cursor over the image, the cursor [ ] changes to [ ]. Click the point where is to be the standard. The color in the image is adjusted with white as the standard on the point you selected. If you click on another point over the image, the white balance is adjusted again. When you finish this operation, click the [Click (RAW)] button or right-click. The coordinates of the cursor position and the RGB values (8-bit conversion) of the image are displayed in the lower-left of the main window (p.1-2). The image is adjusted based on the value of 1 1 pixels from the clicked point. Even if you have selected a neutral gray point of the image, the result of adjustments is the same as when you select a white point. Performing Detailed Edits in the Edit Image Window Displaying an Image in the Quick Check Window Reference 1 2 3 4 5 Index 1-8 Editing Images Adjusting the Brightness You can adjust the brightness in the range of ­2.0 to +2.0 (in 0.01-stop increments when entering a value). You can perform various edits on the RAW, JPEG, and TIFF images that are supported by Digital Photo Professional. Cover/Table of Contents 1 2 Click the [Brightness (RAW)] button (p.1-2). The [Brightness adjustment] dialog box appears. Alternatively, you can display this dialog box by selecting [Adjustment] menu [Brightness adjustment(RAW)]. 1 2 3 Select an image. Edit the image (p.1-9 to p.1-12). You can apply edits to other images by copying and pasting the edit data to the other images (p.1-13). You can revert edited images to the last saved settings or shot settings (p.1-14). Introduction Displaying Thumbnail Images and Performing Basic Edits in the Main Window Adjust an image while viewing it. Save the edited image (p.1-14). Restores the image to its original settings. Drag the slider left or right to adjust the brightness. Enter a value to adjust the brightness. Before exiting Digital Photo Professional, you must save the edited images (p.1-14). When multiple images are selected, the edits are applied to all the selected images. The editing data can be saved in a separate file (p.1-13). The edited images can be transferred to image editing software (p.1-18). Performing Detailed Edits in the Edit Window 3