Using the projector with Windows 98 for the first time The first time you connect a computer running Windows 98 to the projector, the computer recognizes the projector as "new hardware" and the Add New Hardware Wizard appears. Follow these instructions to use the Wizard to load the correct driver (which was installed with your Windows operating system). If you are running Windows 2000 or Windows ME, skip these steps and go to "Adjusting the image" on page 13. a a Click Next to begin searching for the driver. b b Make sure "Search for the best driver" is selected, then click Next. c Uncheck any checked boxes, then click Next. Windows automatically locates the driver. If this driver has been removed, reload the driver using your Windows operating system CD. c d When Windows finds the driver, you are ready to install it. Click Next. d 14 Skip this page if you did not connect a USB mouse cable For Windows 98: · · If you connected the USB cable, the Add New Hardware Wizard appears again. Drivers must be installed to use the USB functionality. The Wizard launches three times. The first time it detects a USB Composite Device. The second time a USB Human Interface Device (for the keyboard). The third time it detects a USB Human Interface Device (for the mouse). For Windows 2000, Windows ME, and Windows XP: · The USB drivers are automatically installed. 15 ...