User manual CANON PIXMA MP510 - EASY SETUP INSTRUCTIONS

Easy Setup Instructions Start Here Photo All-in-One Unpack the Machine QT5-0453-V02 · Please confirm the included items against the illustration printed on the lid of the packing box. · A USB cable is necessary to connect the machine with your computer. 1 Prepare the Machine a Place the machine on a flat and horizontal surface, and do not place any objects in front of the machine. Open the Front Feeder, and extend the Paper Output Support and the Paper Support. Caution Before turning on the machine, remove all of the shipping tapes. Important Do not connect the USB cable until after the software is installed. Important If an unintended language is displayed on the LCD, proceed setup to the end of step 3 "Install the Ink Tanks", and then refer to "An Unintended Language Is Displayed on the LCD" in "Troubleshooting" of the User's Guide on-screen manual to change the LCD language. 2 Install the Print Head a Remove the Print Head from its package. 3 Install the Ink Tanks a Peel back the orange tab completely and remove the plastic wrapper from the ink tank. Loading Paper This machine offers two paper sources to load printing paper; the Auto Sheet Feeder, found at the top of the machine, and the Front Feeder, found at the front of the machine. If the message appears, go to e. e Lift the Scanning Unit (Printer Cover) open, and Scanning Unit (Printer Cover) set the Scanning Unit Support to hold the cover. The Print Head Holder moves to the center. Caution There may be some transparent or light blue ink on the inside of the bag the print head comes in, or the inside of the protective cap - this has no effect on print quality. Be careful not to get ink on yourself when handling these items. If the orange-colored protective film is not removed completely, problems with printing may occur. b Twist off and discard the orange protective cap located on the bottom of the ink tank. Protective Cap Do not press! Ink Port Note · At purchase, the machine is set to feed from the Auto Sheet Feeder. · You can load A4, Letter, or B5-sized plain paper in the Front Feeder. When using any other type of paper, load it in the Auto Sheet Feeder. b Remove the orange protective cap from the Print Head and discard it. Auto Sheet Feeder Electrical Contacts Electrical Contacts b Plug the power cord in the back of the machine and connect the other end to the wall outlet. Important · Do not touch the electrical contacts. · Do not touch the ink port. Protective Cap Print Head Nozzles Front Feeder c Insert the ink tank into the right-hand slot and press the into place. f Write down the serial number located inside the machine. You will need this to register your product. Note Do not touch the print head nozzles and the electrical contacts. mark on the ink tank until it clicks Loading Paper in the Auto Sheet Feeder a Load the paper in the Auto Sheet Feeder with the print side facing UP. c Firmly raise the Print Head Lock Lever until it stops. b Align the paper stack against the Cover Guide on the right side of the Paper Support. the left side of the paper stack. Paper Guide c Pinch the Paper Guide and slide it against Serial Number Location Print side facing UP. Important · Plug the power cord all the way in, since it may be difficult to plug. · Make sure that the Document Cover is closed. d Insert the Print Head. d Make sure the ink lamp lights red. Refer to the color guide on the Print Head Lock Lever. Cover Guide c Open the Operation Panel, then press the ON/ OFF button to turn on the machine. Do not touch! Loading Paper in the Front Feeder a Load the paper in the Front Feeder with the e Lower the Print Head Lock Lever carefully. e Lift the Scanning Unit (Printer Cover) slightly to print side facing DOWN and the leading edge to the far side. of the Front Feeder. set the Scanning Unit Support back to its original position, and then gently close the Scanning Unit (Printer Cover). b Align the paper stack against the right edge c Align the near and the left edges of the paper with the Paper Size Mark. d Use the { or } button on the Operation Panel to select the language for the LCD, then press the OK button. Important If the Scanning Unit (Printer Cover) is left open for more than 10 minutes, the Print Head Holder moves to the right. Close and reopen the Scanning Unit (Printer Cover) to return the Holder to the center. d Pinch the Paper Guide and slide it against the left side of the loaded paper stack. Paper Guide Print side facing DOWN. (1) Press the { or } button to select the language. (2) Press the OK button. Important The machine starts operating. Wait about 2 minutes until the machine stops making noise. Hardware setup is complete. Paper Size Mark Note For details, refer to the Quick Start Guide. Windows® MP Drivers Installation Macintosh® MP Drivers Installation do W in Note · The screens below refer to Windows XP Service Pack 2 installation. Screens may vary depending on the operating system you are using. · For Windows XP or Windows 2000, log on to Windows as a member of the Administrators group before continuing. · Before installing the driver, disable all anti-virus programs and automatically loading programs. f Read the License Agreement carefully and click Yes. M ac in to sh w s Follow the on-screen instructions to install the software. If a message asking for your confirmation to restart your computer appears, click OK. machine with a USB cable, then turn the machine on. The software will begin identifying the printer port being used. Important If you cannot go to the next procedure after 3 minutes, refer to "Troubleshooting" instructions in the User's Guide on-screen manual. Important Since Mac® OS 9, Mac OS X Classic environments, or Mac OS X v.10.2.7 or earlier are not supported, do not connect the machine to these. Note · Use Mac OS X v.10.2.8 to 10.4.x. · The screens below refer to Mac OS X v.10.4.x installation. Screens may vary depending on the operating system you are using. · Log on as an Administrator before continuing. · Before installing the driver, disable all anti-virus programs and automatically loading programs. g When the list of applications to install appears, confirm the contents, then click Install. Note Move the cursor over items to display explanations of each application below. g When the Printer Connection screen appears, connect the h Read the License Agreement carefully and click Yes. a Turn off the machine. (1) Press the ON/OFF button. (2) Make sure that the POWER lamp stops flashing. Follow the on-screen instructions to install the software. Note When the User Registration screen appears, follow on-screen instructions to register your product. You will need your product serial number, which is located on the inside of the machine. See Step 1- f on the front page. i Follow the on-screen instructions to register your product. b Turn the computer on and start Windows. Important If you see the Found New Hardware Wizard, remove the USB cable. Click Cancel to quit the screen. Next, turn off the machine. Then proceed from step 3 to install the MP Drivers. a Connect one end of the USB cable to the computer, the other to the machine. Note Make sure the machine is turned on. j When the Installation completed successfully screen appears, click Restart. The system is restarted automatically. c Insert the Setup CD-ROM. The setup program should run automatically. Note The setup program should run automatically. If the installer in the CD-ROM does not run automatically, click Start and select My Computer, then double-click the CD-ROM icon . b Turn on your Mac. c Insert the Setup CD-ROM. Note If the CD-ROM folder does not open automatically, double-click the CD-ROM icon on the desktop. *When connecting from Mac OS X v.10.3.3 or earlier: Restarting the computer while connected to the machine may cause the machine not to be detected. To resolve this, either unplug the USB cable then plug it back in again, or turn the machine off then back on again. d When the main menu appears, click Easy Install. h Follow the on-screen instructions to register your product. Note When the User Registration screen appears, follow on-screen instructions to register your product. You will need your product serial number, which is located on the inside of the machine. See Step 1- f on the front page. d Double-click the Setup icon. e When the Authenticate screen appears, enter your administrator name and password. Click OK. If you do not know your administrator name or password, click , then follow the on-screen instructions. k After restarting the computer, start Printer Setup Utility i When the Installation completed successfully screen appears, click Exit. (start Print Center if you are using Mac OS X v.10.2.8) and then check that the printer name you want to use is shown in Printer List. If the printer name is not displayed, click Add to add the device. For more detailed instructions, refer to the Mac on-screen Help. Now you have completed installation of the software. Note · Select Easy Install in order to install the MP Drivers, on-screen manuals, and application software. Select Custom Install in order to choose the options you would like to install. · To install Adobe® RGB (1998), click Custom Install and follow the on-screen instructions. If you are using Windows Me/98, Adobe RGB cannot be installed. e When the list of applications to install appears, confirm the contents, click Install. Note Move the cursor over items to display explanations of each application below. f When the main menu appears, click Easy Install. If Restart is displayed, make sure that the Restart the system now (recommended) check box is selected, then click Restart. Now you have completed installation of the software. Note Select Easy Install in order to install the MP Drivers, on-screen manuals, and application software. Select Custom Install in order to choose the options you would like to install. Part no. QT5-0453-V02 © 2006 Canon Inc. "Windows" is a trademark of Microsoft Corporation, registered in the United States and other countries. "Macintosh" and "Mac" are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. "Adobe" and "Adobe RGB (1998)" are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. All other product and brand names are trademarks of their respective owners. Specifications subject to change without notice. Printed in Vietnam.