User manual SONY ERICSSON K750I - EMAIL MESSAGING

G s Email messaging Mail on the move etting tarted March 2005 Getting started Email messaging Contents Introduction ............................................................................................... 3 Before you start ..................................................................................... 3 Options for settings ................................................................................ 4 Receive settings using the Phone setup for E-mail ............................... 4 Receive settings from your service provider .......................................... 4 Set up email manually ............................................................................ 5 Using email ............................................................................................ 6 2 March 2005 Getting started Email messaging Introduction Instruction symbols The following instruction symbols may appear in this Getting started guide: Note Indicates that a service or function is network- or subscription-dependent. Contact your network operator for details. See also page ... Use the selection keys or the navigation key to scroll and select. Press the navigation key centre. Press the navigation key up. Press the navigation key down. Press the navigation key to the left. Press the navigation key to the right. Use email in your mobile phone to send messages, pictures and attachments as you would with your computer. % } Before you start Settings may already be entered when you buy your phone. If not, make sure you have your 3G (UMTS)/GPRS or GSM network operator and/or service provider subscription information at hand before you start setting up your email. In order to send and receive email messages, you need the following: · A phone subscription that supports data transmission. · Settings entered in your phone. · You may also have to register as an Internet and email account user with your service provider or network operator. 3 March 2005 Getting started Email messaging Options for settings You can set up in one of the following ways: · automatically by using the Sony Ericsson Phone setup for E-mail (if supported by your operator), see, www.SonyEricsson.com/support for more information · automatically by receiving settings from your service provider · manually by entering the settings in your phone We recommend that you set up email in your phone automatically, through your service provider or visit www.SonyEricsson.com/support and use the Phone setup for E-mail since these are the easiest ways to quickly get started. This guide describes all three options. Receive settings using the Phone setup for E-mail You will find the Phone setup for E-mail at www.SonyEricsson.com/support. Select region and country or Global Support Area. Enter your phone model and select E-mail under Phone setup. First of all you need the following information from your service provider: · Data connection type · Email service provider name · Email server name (incoming/outgoing) · Email username · Email password · Email address Follow the instructions on the screen. You will receive the Phone setup via SMS. When you receive the text message, you simply } Yes to install your new settings. Receive settings from your service provider Check your service provider's Web site for information or contact their support desk and ask about automatic remote setup of email settings. If remote phone setup is possible, they will send you the auto setup via SMS. When you receive the text message, you simply } Yes to install your new settings. 4 March 2005 Getting started Email messaging Set up email manually Please make sure that you have the following: · Internet (data account) and email account information (a simple way of setting up an Internet account is to ask your service provider to send you a message that contains the required information to create an account automatically on your mobile phone) · Incoming server address (POP3 or IMAP4 server) ­ which identifies the computer where your incoming email messages are stored · Outgoing server address (SMTP server) ­ which identifies the computer through which your outgoing email messages are sent · Email address · Email User name · Email Password Data account and email account A data account is needed to connect to a server and an email account to use email messaging. You can have several data accounts saved in your phone, with different settings for different purposes (for example, one for browsing the Internet and one for email). If you do not have a data account in your phone, follow the instructions below. Set up data account 1. } Settings } the Connectivity tab } Data comm. } Data accounts } New account } Add. 2. Select an account type, PS data, CS data, PS data or CS data (you may only have two account types to choose from in your phone) and enter the following: · A name for the data account. You can use a name of your own choice. · For PS data (Packet Switched data), enter the APN (Access point name) ­ the address of the external data network you want to connect to, either an IP address or a text string. · For CS data (Circuit Switched data), enter the phone number from the service provider. · For PS data (General Packet Radio Service), enter the APN (Access point name) ­ the address of the external data network you want to connect to. · For CS data (Global System for Mobile Communications), enter the phone number from the service provider. · Enter your username. It is used to log on to the external data network. 3. } Save. The following steps, 4 to 5, are valid for PS data (Packet Switched data) only. 4. Highlight the account you just created } Edit } IP address. 5. Enter the IP address for the gateway } Save. 5 March 2005 Getting started Email messaging Set up email account 1. } Messaging } Email } Settings } New account } Add. 2. Enter a name for the email account, for example Home or Office } OK. 3. } Connect using and select the data account that you created earlier to use with this email account 4. } Protocol. Select POP3 or IMAP4. POP3 is the most common. 5. } Incoming server. Enter the name or IP address of the service provider for incoming email messages. 6. } Incoming port. If needed, change the port used by the protocol you are using. 7. } Encryption Choose whether your email messages should be encrypted. 8. } Mailbox. Enter the username for your email account. 9. } Password. Enter a password for your email account. Your service provider will alternatively request a password on connection. 10. } Outgoing server. Enter the name or IP address of the SMTP server to be able to send email messages. 11. } Outgoing port. If needed, change the port used by the SMTP protocol. 12. } Email address. Your Internet service provider supplies you with your email address. 13. } Download. Choose whether to receive Headers & text or Headers only. 14. } From name. Enter your name. This will appear in outgoing email messages. This is not mandatory. 15. } Signature. Choose if you want to add a signature to your email messages. This is not mandatory. 16. } Copy outgoing. Select On, if you want email messages sent from your phone to be sent to an additional email address of your choice. This way, your sent messages are copied and can be saved for future reference. This is not mandatory. 17. } Check interval. Choose how often you want the phone to connect to your email server and check for incoming email messages. This is not mandatory. Default account If you have both an office and a home email account, you can set one of them as default. Set default account 1. } Messaging } Email } Settings. 2. Select the account that you want to use as default. Using email To write and send an email message 1. } Messaging } Email } Write new. 2. Write the subject } Continue write the text } Continue. 3. } Enter email address to enter an email address or, } Phonebook look-up to retrieve a phonebook address or } Phonebook look-up to retrieve a contact address. 4. } Send or } More to view options. To receive and read email messages 1. } Messaging } Email } Inbox } Send&rec (when inbox is empty) or } Messaging } Email } Inbox } More } Send & receive to download new messages. 2. Select a message to read it. To reply to an email message 1. Open the email message } Reply. 2. Write your message. } More to view options. 3. } Send to send the message. 6 March 2005 Getting started Email messaging To save an email address or a phone number in an email message 1. Select the email address or phone number } More. 2. } Save email or } Use } Save number. To save an email message 1. Open the message } More } Save message. 2. } Templates to save the message in Templates in the Messaging menu or } Saved email to save the message Saved email in the Email menu. To save several email messages 1. } Messaging } Email and select a subfolder. 2. Select a message } More } Mark several. 3. Select more messages by pressing Mark or Unmark. 4. } More } Save messages. The number of email messages that can be saved depends on memory left in the phone. All email messages are also saved on your email server, and you can view both older and newer messages on the server. To delete an email message 1. } Messaging } Email } Inbox and select the message } More. 2. } Mark for deletion or } Mark several to delete several messages. Select more messages by pressing Mark or Unmark. } More } Mark for deletion. Messages are deleted the next time you synchronize with your email server. 3. For IMAP4 users only. } More } Clear inbox. and press With send & rec. or No send & rec. to delete messages. This Getting Started guide is published by: Sony Ericsson Mobile Communications AB, SE-221 88 Lund, Sweden Phone: +46 46 19 40 00 Fax: +46 46 19 41 00 www.SonyEricsson.com © Sony Ericsson Mobile Communications AB, 2005. All rights reserved. You are hereby granted a license to download and/or print a copy of this document. Any rights not expressly granted herein are reserved. First edition (March 2005) Publication number: EN/LZT 108 7542 R1A This document is published by Sony Ericsson Mobile Communications AB, without any warranty*. Improvements and changes to this text necessitated by typographical errors, inaccuracies of current information or improvements to programs and/or equipment, may be made by Sony Ericsson Mobile Communications AB at any time and without notice. Such changes will, however, be incorporated into new editions of this document. Printed versions are to be regarded as temporary reference copies only. *All implied warranties, including without limitation the implied warranties of merchantability or fitness for a particular purpose, are excluded. In no event shall Sony Ericsson or its licensors be liable for incidental or consequential damages of any nature, including but not limited to lost profits or commercial loss, arising out of the use of the information in this document. 7 March 2005