User manual MAGELLAN SPORTRAK MAP - FAQ

SporTrak S.No Product SporTrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Question Solution 1 On which Websites can I do GPS co-ordinate conversion? Check out www.geocoder.us or www.maporama.com 2 SporTrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Are Apple® MacintoshTMcomputers compatible with SporTrak®? No. Macs are not compatible with SporTrak. 3 SporTrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Is the Magellan SporTrak® compatible with Microsoft ® Windows Vista®? The software applications available for SporTrak® are not compatible with Microsoft® Windows Vista. 4 SporTrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO What are the different IPX ratings? IPX-0 No special protection. IPX-1 Protected against falling water Equivalent to 3-5mm rainfall per minute for 10 minutes. Unit is placed in its normal operating position. IPX-2 Protected against falling water when tilted up to 15 degrees. Same as IPX-1, but unit is tested in four fixed positions,tilted 15 degrees in each direction from normal operating position. IPX-3 Protected against spraying water. Water spraying up to 60 degrees from vertical at 10 liters/min at a pressure of 80100kN/m2 for 5 min. IPX-4 Protected against splashing water. Same as IPX-3, but water is sprayed at all angles. IPX-5 Protected against water jets. Water projected at all angles through a 6.3mm nozzle at a flow rate of 12.5 liters/min at a pressure of 30kN/m2 for three minutes from a distance of three meters. IPX-6 Protected against heavy seas. Water projected at all angles through a 12.5mm nozzle at a flow rate of 100 liters/min at a pressure of 100kN/m2 for three minutes from a distance of three meters. IPX-7 Protected against water immersion. Immersion for 30 minutes at a depth of one meter. IPX-8 Protected against water submersion. The equipment is suitable for continual submersion in water under conditions which are identified by the manufacturer. A PC data cable will be required, but disconnected from the PC, as well as a paper clip or a jumper wire. With PC data cable still connected to the unit power ON the unit and press both the "Power" and "Zoom Out" buttons at the same time and hold them down for two seconds. The following message appears: "Test Serial Port Press Enter". Do not press the "Enter" button yet. Next, use the paper clip or jumper wire and insert the ends to Pin #2and #3. Pin #2 is the NMEA Positive (TX+) Transmitter; #Pin 3 is the DBR Positive (RX+) Receiver. While performing the cable test you will see a series of check points in each individual Baud Rate point. 1200, 4800, 9600, and 19200. Each point should display the message "OK"at the bottom. If the user sees the initials "NG" (NO GOOD) perform the test again. If the test continues to display the message `NG" the problem may be due to a bad cable. When the cable test is finished press the "Power Key" to power off the unit. To initialize the GPS press the menu button, then select setup, then select initialize, and follow the prompts on the GPS screen. 5 Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How do I perform a cable test in SporTrak® units? 6 SporTrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How do I initialize my SporTrak® model? 7 SporTrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How can I identify the menu button on SporTrak units? The menu button looks like an open book symbol. Press and hold the power button for two seconds > Display backlight illuminates (low) > Press and hold the power button for two seconds> Display backlight illuminates (High)>Press and hold the power button for two seconds > Display backlight turns off. 8 Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How to turn on /off the display backlight on SporTrak®? 9 SporTrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO SporTrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO SporTrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How long will the back light stay lighted on my SporTrak® when there have been no buttons presses? Four minutes. 10 How do I adjust the contrast in my SporTrak®? From any screen>Press menu>Press up/down arrow to select contrast>Use right/left arrows to adjust the contrast. The current position shows with a large arrow icon in the center of the display indicates the current position. 11 What symbol indicates my current position on my SporTrak® map screen? 12 Where can I find the battery life The battery meter is at the bottom meter on my SporTrak®? of the satellite status screen. From any screen press menu button use the arrows to highlight the "Mark" and press enter, The save button is highlighted. Press enter to save the waypoint using the default name and icon. From any screen press menu button use the arrows to highlight the "Mark". Press enter and use the arrow button to move the cursor to icon > press enter select the icon from the list > press enter move the cursor to the Name > press enter and edit the name according to the user > press enter The save button is highlighted. Press enter to save 13 How do I save a waypoint with a receiver-generated name in the basic SporTrak®? 14 Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How do I save a waypoint with user input icon and name in my SporTrak®? the way point using the default name and icon. 15 Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How many data types can be customizable in the data fields? 13 data types are customizable in the data fields. From the map screen >Press the menu button>Highlight the Map setup>Use the arrows to highlight "Detail" field>Press enter>Use the arrow to select the desired map detail level > Press enter. From the map screen>Press the menu button>Highlight the Map setup>Press enter>Use the Left/Right arrow to select the "Display" tab >Use Up/Down arrows to select the "Waypoint">Press enter. From the map screen>Press the menu button>Highlight the map setup>Press enter>Use the Left/Right arrow to select the "display" tab >Use Up/Down arrows to select the "Track lines">Press enter. From the map screen>Press the menu button>Highlight the map setup>Press enter>Use the Left/Right arrow to select the "Display" tab >Use U/D arrows to select the "Topo lines">Press enter. From the map screen>Press the menu button>Highlight the map setup>Press enter>Use the Left/Right arrow to select the "Display" tab >Use U/D arrows to select the "POI">Press enter. 16 How do I set the map details on SporTrak®? 17 How do I turn on/off the waypoints display? 18 Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How do I turn track lines on/off? 19 How do I turn TOPO lines on/off? 20 How do I turn Display points of interest (POI) on/off? 22 Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How do I turn the data fields on/off? From the map screen>Press the menu button>Highlight the Hide map Info or Show map info>Press enter. From the map screen>Press the menu button>Highlight Customize>Press enter>Use Up/Down arrows to select the desired information. From the map screen>Press the menu button>Highlight Customize>Press enter> Use Up/Down arrows to highlight customize fields>Use Left/Right arrows to highlight the title for the data field to be changed>Press enter Use the arrow keys to select the new data type>Press Enter. From the map screen>Press the menu button>Highlight the map setup>Press enter> Use the arrows to highlight the "Orientation" field>Press Enter> Use the arrow keys to select the desired "Map orientation">Press Enter. From the map screen>Press the menu button>Highlight the map setup>Press enter> Use the arrows to highlight the "Primary Usage" Field>Press enter> Use arrows to select Land or Marine> Press enter. From the map screen>Press the menu button>Highlight the map setup>Press enter> Use the arrows to highlight the "Track Mode" Field>Press enter> Use arrows to select Mode> Press enter From any screen>Press the menu button> Highlight the Vert. Profile> Press enter > Select the option > Press enter 23 How do I select my data fields? 24 Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How do I customize the data fields? 25 Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How do I change the map orientation? 26 How do I select the primary usage field in Land or Marine? 27 How do I turn the Track Mode on/off? 28 How do I select the vertical profile? 29 Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How do I project a waypoint on my SporTrak®? 30 Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How do I access waypoints from the database in my SporTrak®? 31 Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How can I manually enter in lat/Lon readings in my SporTrak®? 32 Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How can I save current location as a waypoint in my SporTrak®? 33 Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How do I delete a user waypoint? From the position screen> Press menu button> Highlight projection> Press enter> To select a "From" location other than your present position, use arrows to highlight "From" field> Press enter>Search the database to locate the waypoint or point of interest you want to project a new way point from> Use arrow to highlight the "Distance" Field> Press enter> Enter desired distance to project> Press enter> use arrow to highlight "Bearing" field> Press enter> Enter desired bearing to project> Press enter> Use arrows to highlight save button> Press enter From any screen> Press menu button> Highlight database> Press enter> Use up/down arrows to select category> Use Left/Right arrows to select "Find By"> Press enter. From any screen> Press menu button> use up/down arrow to highlight mark> Press enter> Highlight location field> Press enter> Edit line one of the location field> Press enter> Edit line two of the location field> Edit elevation field> Highlight "SAVE" Button From the map screen> Use arrow keys to move cursor to desired> Press the menu button> Use up/down arrows to highlight mark> Press enter> Modify the icon, name or message using the up/down arrows> Press enter> Highlight the save> Press enter. From any screen> Press the menu button> Highlight database> Press enter> Highlight user> Use the arrow to select "Find by"> Press enter> Select the way point to be delete> Press menu> highlight Delete> Press enter> Confirm Yes Or No. 34 Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How do I edit a user waypoint? 35 Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How can I view a map object on map screen? From any screen> Press the menu button> Highlight database> Press enter> Highlight user> Use the arrow to select "Find by"> Press enter> Select the waypoint to be edited> Press enter> Select field to be edited> Press enter> Edit the field> highlight the "Save" Button > Press enter. From any screen> Press menu> Highlight database> Press enter> Select database category> Press enter> Select waypoint from the list> press enter. From any screen> Press Menu> Highlight database> Press enter> Highlight User> Press enter> Select the way point from the List> Use Up/Down arrows to highlight "View" Button> Press enter From any screen> Press the menu button> Highlight database> Press enter> Use arrows to highlight an uploaded map region> Press enter. Highlight Address> Press enter> Enter street name> Use the arrows to highlight the street name> Use the arrows to view the address range> Press enter> Enter the address number> Press enter> Highlight "Mark" or "View " From any screen> Press menu button> Highlight Routes> Press enter> Select the "Backtrack" from the route list> Press Enter> Highlight active backtrack> Press enter 36 How can I view a user waypoint on the map in a SporTrak®? 37 Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How do I search a street address in SporTrak® if it was uploaded with MapSendTM streets data? 38 Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How do I create a back track route? 39 Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How do I create a multileg route? 40 Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How do I activate/deactivate routes in my SporTrak®? From any screen> Press menu button> Highlight Routes> Press enter> Select an empty route> Press enter> STEP 1: Select starting waypoint> Press enter> Select waypoint category> Use Left/Right arrows to select "Find By"> Press enter> Select waypoint from the list> Press Enter> STEP 2: Select leg destination waypoint> Use Up/Down arrows to move highlight to next available leg in the route. Indicated by the dash> Press Enter> Select waypoint category> Use left/right arrows to select "find by"> Press Enter> Select waypoint from the list> Press enter> Step 3: Save the route> Use up/down arrows to highlight "Save route" button> Press enter. From Any screen> Press Menu> Highlight Routes> Press Enter> select route> Press enter> Highlight Activate or Deactivate> Press enter From any screen> Press menu> Highlight routes> Select route> Press Menu> Highlight Map view> Press enter. 41 How can I view a route? 42 Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How do I insert a route leg in my SporTrak®? 43 Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How do I delete a route leg in my SporTrak®? From any screen> Press menu> Highlight routes> Select route> Press Menu> Highlight Map view> Press Enter> Highlight destination waypoint for a leg that will have a leg inserted> Press menu> Highlight Insert> Press enter> Select database> select waypoint> Press enter. From any screen> Press menu> Highlight routes> Select route> Press Menu> Highlight Map view> Press Enter> Highlight destination waypoint for a leg that will have a leg deleted> Press menu> Highlight Delete> Press enter> Select database> select waypoint> Press enter. 44 Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO 45 Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO From any screen> Press menu> Highlight routes> Select route> Press Menu> Highlight Map view> Press Enter> Highlight destination How can I replace a route leg in waypoint for a leg that will have a ® my SporTrak ? leg that will be replaced> Press menu> Highlight Replace> Press enter> Select database> select waypoint> Press enter. From any screen> Press menu> Highlight routes> Select route> Press Menu> Highlight Map view> How do I append a route leg in Press Enter> Highlight next my SporTrak®? available leg (indicated by dashes)> Press enter> Select database> select waypoint> Press enter. How do I reverse a route in my SporTrak®? From any screen> Press Menu> Highlight Routes> Select Route> Press Menu> Highlight reverse> Press enter From any screen> Press Menu> Highlight Routes> Select Route> Press Menu> Highlight Delete> Press enter. From any screen> Press Menu> Highlight Routes> Select Route> Press Menu> Highlight Save Trk to Rte View> Press enter. From any Screen> Press Menu> Highlight Setup> Press enter> Highlight Nav Screens> Press enter> Sat status on/off> Press enter> Compass on/off> Large data on/off> Press enter> Position on/off> Press enter> Road on/off> Press enter. From any screen> Press menu> highlight Setup> Press enter> Highlight Co-ord System> Press enter> Select primary or secondary> Press enter> Select coordinate system> Press enter NOTE: The coordinate system you select may require additional information. 46 Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO 47 How do I delete a route in my SporTrak®? 48 How can I create a route using a track history? 49 Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How do I turn the NAV screen in the SporTrak® on/off? 50 Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How can I select coordinate system in my SporTrak®? 51 Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How do I select a map datum on my SporTrak®? From any screen> press menu> Highlight Set up> Press enter> Highlight Mapdatum> Press enter> select primary or secondary> Press enter> select Datum> Press enter. From any screen> press menu> Highlight Set up> Press enter> Highlight Elev Mode> Press enter> Select 2D or 3D> Press Enter From any screen> press menu> Highlight Set up> Press enter> Highlight Time Format> Press enter> select Format> Press enter. From any screen> press menu> Highlight Set up> Press enter> Highlight NAV Units> Press enter> select Nav Units> Press enter From any screen> press menu> Highlight Set up> Press enter> Highlight North Reference> Press enter> select North Reference> Press enter. From any screen> Press Menu> Highlight Setup> Press enter> Highlight Light timer> Press enter> Select Timer duration> Press enter. From any screen> Press Menu> Highlight Setup> Press enter> Highlight Beeper> Press Enter> Select Beeper Options> Press enter. From any screen> Press Menu> Highlight setup> Press enter> Highlight NMEA> Press enter> Select NMEA Message> Press enter. From any screen> Press Menu> Highlight setup> Press enter> Highlight Baud Rate> Press enter> Select Baud Rate> Press enter. 52 How do I select elevation mode (2-D to 3-D) on my SporTrak ® ? 53 How to change the time format on my SporTrak®? 54 How do I select NAV units on my SporTrak®? 55 How do I select north reference on my SporTrak®? 56 How do I turn the backlight timer on/off in my SporTrak unit? 57 How do I turn the beeper in my SporTrak® on/off? 58 How do I select NMEA message in my SporTrak®? 59 How do I select Baud Rate in my SporTrak®? 60 Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How do I select daylight savings in my SporTrak®? From any screen> Press Menu> Highlight setup> Press enter> Highlight Daylight savings> Press enter> Select Region> Press enter. From any screen> Press Menu> Highlight setup> Press enter> Highlight Power Off Timer> Press enter> Select On/Off> If On, Select Mode and timer settings. From any screen> Press Menu> Highlight setup> Press enter> Highlight Clear Memory> Press enter> Highlight All>Press enter> Confirm? Yes/No> Press Enter. SporTrak® will turn Off. From any screen> Press Menu> Highlight sun/moon> Press enter> Highlight date field> Press enter> Use arrows to change date> Press enter From any screen> Press Menu> Highlight sun/moon> Press enter> Highlight at field> Press enter> Use Left/Right arrows to select "Find By"> Press enter> Highlight Waypoint> Press enter 61 How do select the power off timer in my SporTrak®? 62 How do I clear all memory in my SporTrak®? 63 How do I change the date for sun/moon information in my SporTrak®? 63 How do I change the sun/moon position in my SporTrak®? 64 How can I access fsh /hunt From any screen> Press Menu> times display in my SporTrak®? Highlight Fish/Hunt> Press enter 65 How do I change the fish/hunt date in my SporTrak®? 66 How can I change the fish/hunt position in my SporTrak®? 67 How do I turn on simulatorauto mode in my SporTrak®? From any screen> Press Menu> Highlight Fish/Hunt> Press Enter> Highlight Date Field> Press enter> Use arrows to Change date> Press enter From any screen> Press Menu> Highlight Fish/Hunt> Press Enter> Highlight At Field> Press enter> Use left/right arrows to select "Find By"> Press enter> Highlight Waypoint> Press enter From any screen> Press Menu> Highlight Setup> Press Enter> Highlight Simulate> Press enter> Highlight Auto> Press Enter> Confirm clearing of track> Press enter 68 Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How do I turn on simulatoruser mode in my SporTrak®? From any screen> Press Menu> Highlight Setup> Press Enter> Highlight Simulate> Press enter> Highlight User> Press Enter> Enter heading and speed Data> Press Enter> Confirm clearing of track> Press enter Barometer and 3-Axis Electronic compass is available only in SporTrak Color SporTrak Pro Marine® contains navaids, unique marine functions such as high and low tide time for most of North American ports. 69 Sportrak Color Which SporTrak Unit has a Barometer and 3-Axis Electronic compass? What marine information will be ® available on the SporTrak Pro Marine.? 70 Sportrak Pro Marine Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO 71 How many routes can be created ® in my SporTrak ? Twenty routes can be created in SporTrak® 72 How many Wwaypoints can be created in my SporTrak® ? 500 waypoints can be created in SporTrak®. 73 How many trackpoints can be created in my SporTrak series unit? 2000 trackpoints can be created in SporTrak®. SporTrak® map features include the following: WAAS enabled 2 Mb North American basemap of Interstate/State highways, parks, major waterways, airports, cities. 6 Mb of built-in memory for downloading detailed maps from MapSendTM software (sold separately 7 navigation screens Easy-to-read backlit display Front button key pad Only SporTrak® Basic and Sportrak® Map) are not compatible. SporTrak® Color, Pro-Marine, and Topo are compatible. 74 Sportrak Map What basic features are available in my SporTrak® ? 75 Sportrak Is SporTrak® compatible with MapSendTM Blue NAVTM CD? 76 Sportrak TOPO What map information will be available in SporTrak ®Topo? SporTrak Topo consist of contour map information and it's mainly used for back country adventures ® 77 Sportrak Pro What is the memory size available for downloading maps in my SporTrak ®Pro? What map information will be ® available in SporTrak Map ? 22 MB memory can be use for ® downloading maps in SporTrak Pro. The SporTrak ® by default comes with base maps, which includes highways and cities for the US. SporTrak®Pro Marine features include the following: WAAS enabled 15 Mb North American basemap of Interstate/State highways, major roads, parks, major waterways, airports, cities, buoys/beacons, fog signals, radar/radio, (marine Navaids more detailed) 17 Mb of memory for uploading detail maps from MapSend Software (sold separately). SporTrak® has several preprogrammed coordinate systems. It also has the option to specify a `User Grid'. This allows you to setup the GPS coordinates to match maps built on different coordinate systems. Assistance on state plane coordinate systems can be found here: http://gpsinformation.net/state-planemag.html DataSendTM contains points of interest only and has more than 500,000 up loadable points of interest in more than 35 categories. Includes cities, nautical Navaids, campgrounds, parks, and so forth.. The part number for PC cable (PN 730342), PC Cable w/cigarette lighter adapter (PN - 730345), power cable w/cigarette lighter adapter (PN 730343), power/data cables w/bare wires (PN - 730344) can be used for SporTrak®. 78 Sportrak Map 79 Sportrak Pro Marine What are the basic features available in SporTrak® Pro Marine? 80 Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How do I set up a user grid on my SporTrak® uit? 81 Sportrak What map information can I transfer from my DataSendTM software? 82 Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO What is the part numbers for PC cable and power cable with CLA for my SporTrak®? 83 Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How do I create regions to load ® into my SporTrak using MapSendTM software? 84 Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO What are the part numbers for the software used with my SporTrak®? 85 Sportrak What are the part numbers for DataSendTM software CDs 86 Sportrak Color What are the basic features ® available in SporTrak Color? From the menu bar, select regions. Highlight new and left click on it (This activates the region draw tool). Click and drag the mouse on the map screen and draw a region, which will be highlighted in a dotted box.Now select regions on the menu bar and highlight cut region and enter the region name and click OK. an Press enter, make a check mark on the small box which appears on the right hand with the new region name, select regions on the menu bar,and select upload to SporTrak®.. MapSend TMTopo US part number 980611, streets and destinations US, part number: 980613-01, streets and destinations Canada, part number: 980613-02, streets Europe part Number: 980599 DataSendTM CD US Part Number: 90448, DataSendTM CD Europe part number: 990450 SporTrak® Color features the following features: WAAS enabled 10 Mb North American basemap of Interstate/State highways, major roads, parks, major waterways, airports, cities, buoys/beacons, fog signals Radar/radio, high resolution, threeaxis electronic compass and barometer 22 Mb of memory for uploading detail maps from MapSendTM software (sold separately). Only SporTrak SporTrak® Color, Pro-Marine, Topo, Pro, and Map) are compatible. SporTrak pro features include the following: WAAS enabled 9 Mb North American base map of Interstate/State highways, major roads, parks, major waterways, airports, cities, marine Navaids (buoys, lighthouses, marinas, obstructions) 23 Mb of built-in memory for downloading detailed maps from MapSend TMsoftware (sold separately 7 navigation screens , Easy to read backlit display , Front button keypad 87 Sportrak Is SporTrak® compatible with MapSendTM street and destination software? 88 Sportrak Pro What basic features are available in SporTrak® Pro? 89 Sportrak What basic features are available ® in SporTrak ? 90 Sportrak How do I install AA batteries in my SporTrak®? 91 Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How do I select language in my SporTrak®? 92 Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Why should I initialize SporTrak® after clearing the memory? SporTrakTM basic features include the following: WAAS enabled Worldwide database of major city locations 1 Mb of additional up-loadable memory 9 navigations screens Stores up to 500 waypoints and 20 routes, (add 500,000 points of interest (with optional DataSendTM software Easy to read backlight screen Convenient front button keypad ® SporTrak uses two AA batteries that you install from the bottom through the battery cover. To remove the battery compartment, loosen the retaining screw at the bottom of the battery compartment. The battery compartment will come free from the ® SporTrak and you can easily slide it out. Install two AA batteries, observing the correct polarity. Slide the battery compartment back into the SporTrak and tighten (but not overtighten) the retaining screw. Press the MENU button on the keypad select SETUP and press enter and select the language option. Press enter and use the UP/DOWN arrows on the keypad to highlight the language you desire and then press the enter button. The reason for initialization is to speed up the process for computing the first position fix when the SporTrak® has no last position computed in memory. This gives SporTrak® an approximate indication of where it is located so it can use its satellite almanac (Stores in permanent memory) to estimate which satellites are overhead and which one it should be looking for. To convert to decimal degrees take the degrees plus the minutes/60. For example to convert 46deg30.00min in decimal degrees: 46 + 30/60 = 46.5 degrees. Likewise .5 degree = .5*60 = 30 minutes. 93 Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How do I convert from deg.min. to deg.dddd? 94 Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO First clear memory (as this will clear all your previously stored waypoints/landmarks, you may want to save them first). You can do this through the "CLEAR MEMORY" function within the "SETUP" menu. ® My SporTrak cannot locate fnd When memory is cleared, reinitialize satellites. What can I do to resolve your SporTrak® as if new and set this problem? outside for about 10 minutes to collect a new satellite almanac. This part of the process could take up to an hour. When you have accomplished this, ® your SporTrak should be computing fixes and operating normally. 95 Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Where do I connect the wrist-strap on my SporTrak®? On the little D which is at the battery case screw. 96 Is it normal for the backlight to come on with an alarm? The SporTrak® map has 2 Mb for basemap and 6Mb for detail maps. So, if a basemap is downloaded from the worldwide basemap, where is it saved on my SporTrak®? Is it possible to upload maps to my SporTrak® (yellow and black model)? It is and the backlights will not timeout. 97 Sportrak Map It is saved in the detail map folder (6Mb). 98 Sportrak No, this unit is a basic GPS and is not intended for loading maps. You will ® want to look at the various SporTrak models to find one that is capable of loading basic maps. You cannot load the entire map to your SporTrak ®because SporTrak ® does not have enough internal memory to accommodate this download). Go to the map screen. Zoom out to a level of 200 miles or more. You should see a small black box indicating the region you have loaded. Using the arrow keypad, place the cursor inside this box. Now zoom in to a closer range. As you zoom in details of the area loaded should begin to show at zoom levels of 0.40 miles and lower. 99 Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Can I download the entire MapSend TMapplication map to my SporTrak®? 100 Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO How can I view the region, which I have just loaded to my SporTrak®? 101 Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO The PC shows that the firmware has completed loading, but my receiver is still on and I cannot turn it off. Try pressing the GOTO, ESCAPE, and ENTER keys simultaneously. If the unit does not power down, you may have to remove the batteries. 102 Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO When you upload a map to the GPS, the point of interest goes with it, by default, but the point of interest icons are not displayed on the map screen. It's easy to display some or all of them. Press the MENU key on the SporTrak®, select "Map Setup", and use the cursor key to arrow right to the I have loaded maps with the points display tab. In this screen you can of interest using MapSendTM. But I choose to display all the points of don't see the points of interest on interest, not display any overlay map screen? features (clear all), or specify any particular points of interest categories you want to display. You can change your selection anytime. Also, even when points of interest are set to not be displayed, you can still search them, view them, and use them as routing destinations. Your SporTrak® is based on UTC (Universal Time Clock) and not on the local time. 103 Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Why do my tracks have the wrong time stamp? 104 Can I get a Bluetooth® adaptor for my SporTrak ®? We do not support any such activities and a customer is at his/her own risk. 105 What is the optimal com port setting for my SporTrak®? Bits per second: 4800 Data Bits: 8 Parity: NONE Stop Bits: 1 Flow Control: Hardware EGNOS / WAAS are a technology which enables accuracy to be increased from 15-30m to 3-5m. The EGNOS/WAAS concept is to use a reference station network that enables differential GPS to achieve this level of accuracy. Part number for carrying case, belt clip (Black PN ­ 980630-01, green PN ­ 980630-02, and blue PN ­ 98063003), canvas carrying case (PN ­ 0069032-000) can be used. 106 What is EGNOS/WAAS? 107 Sportrak What is the part number for carrying cases for SporTrak®? 108 Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO What map information can I transfer from MapSendTM BlueNavTM CD? MapSendTM BlueNav® contains local marine charts, with tides, port services etc. You can load one chart at a time ®. to your SporTrak UTC is Universal Time Clock. It also known as GMT (Greenwich MeanTime). A route is a series of waypoints. When navigating a route, the GPS will automatically change the destination waypoint to the next waypoint on the list as it reaches each waypoint. The GPS receiver normally sounds an alarm, and requires an acknowledgment, before making any course change. UTM is Universal Transverse Mercator, a system of world coordinates such as latitude and longitude, from 80 degrees south latitude to 84 degrees north latitude, except the measurements are in meters and UTM lines are orthogonal (always at right-angles to each other). This projection makes all latitude and longitude lines (except the central meridians) curved. EULA is End User License Agreement andcontains information about the warranty 109 Sportrak What is UTC? 110 Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO What is a route? 111 Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO What is UTM? 112 Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO What is EULA 113 My SporTrack was stolen. Can Magellan help to find it? ® Unfortunately Magellan is unable to locate stolen SporTrak® units. . SporTrak® is a receiver and is unable to transmit it's location to our facility Vehicle mounting bracket (PN ­ 701259), swivel mounting bracket (PN ­ 701258), bike mounting bracket (PN - 701260) can be used for SporTrak® . We do not recommend using DirectRoute on the SporTrak® mapbecause the available memory on that unit is not enough for most people to load a reasonably sized DirectRoute map, (DirectRoute involves much more data per square mile than otherMagellan map products.) 114 What type of mounting brackets are used for my SporTrak®? 115 Sportrak Map Will "DirectRoute" work on my SporTrak® map? 116 Sportrak,Sportrak Map,Sportrak PRO,Sportrak Marine, Sportrak Color,Sportrak TOPO Is there any website where I can convert lat-long to UTM and back? http://www.cellspark.com/UTM.html