How to install EpsonTalk LQ in 5 EASY steps: Check list : (you need these things) Epson LQ - 570, 1070 ,870, or 1170 EpsonTalk board Local talk cable (8 pin to 8 pin mini din) Macintosh, Phillips screwdriver Verify the printer and the Mac are off. 1) Insert EpsonTalk board into the printer. (just plugs into optional i/f slot) 2) Plug Localtalk cable into Printer port on Mac and Appleltalk port (on left) on printer. 3) (System 7 only) Copy the three files from the Epson Print disk into the system, extensions folder. 3) (System 6 only) Start the Mac with Comunications Toolbox disk and run installer (creates folder) Insert the Epson Print disk and copy Epson Tool to communications folder. Copy EPSON ESC/P 2 NET and EPSON NAMER to the Mac's System folder. Restart the Mac. 4) Turn the printer on and run Epson namer and choose Epson when it appears in the namer window. then quit the Epson namer. 5) Open Chooser under Apple menu (Upper left of Mac screen) and enable Appletalk. Select Epson ESC/P 2 NET then Epson will appear in the Chooser window . Select it and your done. ...