AXIS 212 PTZ Network Camera Installation Guide ENGLISH FRANCAIS DEUTSCH ESPAÑOL ITALIANO AXIS 212 PTZ Installation Guide Page 3 AXIS 212 PTZ Network Camera Installation Guide This installation guide provides instructions for installing the AXIS 212 PTZ Network Camera on your network. For all other aspects of using the product, please see the AXIS 212 PTZ User's Manual, available from www.axis.com or on the Axis Network Video Product CD. Installation steps 1. 2. 3. 4. Check the package contents against the list below. Install the hardware - page 4 Important! Set the IP address - page 7 This product must be installed in Set the password - page 13 compliance with local laws and regulations. ENGLISH Package contents Item Network Camera Indoor power adapter Note: The power adapter is country specific, please check that the type of power adapter you are using is correct Title/Variants AXIS 212 PTZ Europe UK Australia USA/Japan Argentina Korea Extension cable Terminal block connector Mounting kit 1.8m (5.9 ft.) Power cable 4-pin I/O connector block Screwdriver for tamper-proof screws Tamper-proof screws (16mm) Drill template Angled wall mount - inc. screws (12mm) Screws (38mm) and plugs for wall mount Documentation Warranty document AXIS 212 PTZ Installation Guide Axis Network Video Product CD Page 4 AXIS 212 PTZ Installation Guide Description Camera unit Status indicator (LED) Microphone Control button Power connector I/O terminal connector Audio out Audio in Power indicator (LED) Network indicator (LED) Network connector Dome casing Cover plate Serial number (S/N) The serial number is required during the installation. Please make a note of the serial number and retain for future reference. The AXIS 212 PTZ is designed to be mounted on a wall or at an angle using the angled wall mount. Positioned at an angle, the camera can monitor a specific area e.g. along a wall or corridor. AXIS 212 PTZ on angled wall mount Angled wall mount If necessary, cut the plastic to route the cables to the camera Tab AXIS 212 PTZ Installation Guide Page 5 Installing the hardware Refer to the illustration on page 4 for a detailed overview of the AXIS 212 PTZ. Make a note of the serial number (S/N), which is located on the product label on the base of the camera unit casing. The serial number is used in the installation. The AXIS 212 PTZ is designed for indoor use only. Wall mount 1. Using the drill template, drill two holes in the wall. 2. Install the camera unit on the wall using screws and plugs that are appropriate for the wall material. The camera must be mounted with the network connector facing upwards. 3. Proceed to Connecting the cables, below. Network connector up ENGLISH Angled wall mount 1. To install the camera at an angle from the wall, use the angled wall mount. 2. If necessary, cut the plastic to route the cables to the camera. 3. Install the angled wall mount on the wall using the appropriate screws and plugs. 4. Use the supplied screws (12mm) to attach the camera unit to the angled wall mount. The camera must be mounted with the network connector facing upwards. 5. Proceed to Connecting the cables, below. Notes: · The AXIS 212 PTZ can be mounted with the network and power cables routed through the wall or routed through the side openings. There are cover plates for the openings on the dome casing. · The camera must be mounted with the network connector facing upwards. · Ensure that the camera is placed so the tamper-proof screws can be tightened using the supplied screw driver. Connecting the cables 1. Connect the network cable to the camera's network connector. 2. Connect power using one of the methods listed below: · PoE (Power over Ethernet) via the network cable. This will automatically be detected if available via the network. · Connect the supplied indoor power adapter to the power connector on the camera unit. 3. Check that the network, status and power indicators (LEDs) light up green. See the table on page 6 for LED descriptions. Page 6 AXIS 212 PTZ Installation Guide Completing the installation 1. Clean the dome with a dry soft cloth to remove dust and finger prints and use a blower to remove dust from the lens. 2. Mount the dome casing using the supplied tamper-proof screws and screw driver. If using the angled wall mount, hook the side of the dome casing onto the tab on the angled wall mount (see page 4) and secure the dome casing on the other side using a tamper-proof screw. 3. Refer to "Setting the IP address" on page 7 for information on how to assign an IP address to the AXIS 212 PTZ. The installation is now complete. I/O terminal connector block Pin 4 Function Transistor Output Description With a maximum load of 50mA and a maximum voltage of 24V DC, this output has an open-collector NPN transistor with the emitter connected to the GND pin. If used with an external relay, a diode must be connected in parallel with the load, for protection against voltage transients. Connect to GND to activate, or leave floating (or unconnected) to deactivate. Can be used to power auxiliary equipment, max 50mA. 3 2 1 Digital Input 3.3V DC GND LED indicators LED Network Color Green Amber Unlit Green Description Steady for connection to 100 Mbit/s network. Flashes for network activity. Steady for connection to 10 Mbit/s network. Flashes for network activity. No connection. Shows steady green for normal operation. Note: The Status LED can be configured to be unlit during normal operation, or to flash only when the camera is accessed. See the online help files for more information. Go to Setup > System Options > LED settings Steady during startup, reset to factory default or when restoring settings. Slow flash for failed upgrade. Normal operation. Flashes green/amber during firmware upgrade. Status Power Amber Red Green Amber AXIS 212 PTZ Installation Guide Page 7 Setting the IP address The AXIS 212 PTZ is designed for use on an Ethernet network and must be assigned an IP address to make it accessible. Windows AXIS IP Utility and AXIS Camera Management are the recommended methods for setting an IP address in Windows. Requirements Installation methods AXIS IP Utility See page 8 AXIS Camera Management See page 9 DHCP Server in network Optional Optional Operating system Recommended method for: Single camera / small installations Multiple cameras / large installations ENGLISH Windows Windows 2000 Windows XP Pro Windows 2003 Server Notes: · The AXIS 212 PTZ has the default IP address 192.168.0.90 · If setting the IP address fails, check that there is no firewall blocking the operation. See page 10 for other available methods for setting or discovering the IP address of the AXIS 212 PTZ, e.g. in other operating systems. Page 8 AXIS 212 PTZ Installation Guide Single camera / small installations AXIS IP Utility AXIS IP Utility automatically discovers and displays Axis devices on your network. The application can also be used to manually set a static IP address. AXIS IP Utility is available on the Axis Network Video Product CD, or it can be downloaded from www.axis.com/techsup Note that you must install the AXIS 212 PTZ on the same network segment (physical subnet) as the computer running AXIS IP Utility. Automatic discovery 1. Check that the AXIS 212 PTZ is connected to the network and that power has been applied. 2. Start AXIS IP Utility. When the AXIS 212 PTZ appears in the window, double-click it to open the camera's home page. 3. See page 13 for instructions on how to set the password. Set the IP address manually 1. Acquire an unused IP address on the same network segment your computer is connected to. 2. Click the button Set IP address Notes: Set the IP address using IP Utility within 2 minutes of starting the camera. AXIS IP Utility can be used to change a dynamically set IP address to a static one. using serial number and enter the serial number and IP address for the AXIS 212 PTZ. The serial number is located on the product label. 3. Click the Set IP button and follow the instructions. 4. Click View Home Page to access the AXIS 212 PTZ web pages. 5. See page 13 for instructions on how to set the password. AXIS 212 PTZ Installation Guide Page 9 Multiple cameras / large installations AXIS Camera Management AXIS Camera Management can automatically find and set IP addresses, show connection status and manage firmware upgrades of multiple Axis video products. AXIS Camera Management is available on the Axis Network Video Product CD, or can be downloaded from www.axis.com/techsup ENGLISH Set the IP address 1. Check that the AXIS 212 PTZ is connected to the network and that power has been applied. 2. Start AXIS Camera Management. When the AXIS 212 PTZ appears in the window, double-click it to open the camera's home page. 3. See page 13 for instructions on how to set the password. Set the IP address in multiple devices AXIS Camera Management speeds up the process of assigning IP addresses in multiple devices by suggesting available IP addresses from a specified range. Select the devices that you want to configure (you can even select different models) and click the Assign IP icon. Enter the range of IP addresses, the subnet mask and default router that the devices can use. Click Update and the program will search in the specified range and suggest an available IP address for each device. Page 10 AXIS 212 PTZ Installation Guide Other available methods This table shows alternative methods for setting or discovering the IP address. Requirements Installation methods UPnPTM See page 10 Bonjour See page 11 AXIS Dynamic DNS Service See page 11 ARP/Ping See page 12 View DHCP server admin pages for IP address (See note below) Required Optional Optional Windows (ME or XP) Mac OSX (10.4 or later) All All All Macintosh DHCP Server in network Operating system Recommended method for: Notes: · UPnPTM, DHCP and Bonjour are enabled by default in the AXIS 212 PTZ. · The AXIS 212 PTZ has the default IP address 192.168.0.90 · To view the admin pages for the DHCP server, please see the server's own documentation. You may need to contact your network administrator. · If setting the IP address fails, check that there is no firewall blocking the operation. · AXIS Dynamic DNS Service requires an Internet connection without an HTTP proxy. · Bonjour - applicable only in browsers with support for Bonjour, e.g. Safari. UPnPTM UPnPTM functionality is enabled by default in the AXIS 212 PTZ. If also enabled on your computer (Windows ME or XP), the camera will automatically be detected and a new icon will be added to "My Network Places." Click this icon to access the AXIS 212 PTZ. See also page 13 for instructions on how to set the password. Note that you must install the AXIS 212 PTZ on the same network segment (physical subnet) as the computer handling the installation. Note: To install the UPnPTM service on your computer, open the Control Panel from the Start Menu and select Add/Remove Programs. Select Add/Remove Windows Components and open the Networking Services section. Click Details and then select UPnP as the service to add. UPnPTM is a certification mark of the UPnPTM Implementers Corporation. AXIS 212 PTZ Installation Guide Page 11 Bonjour Bonjour (Mac OSX) will automatically discover the AXIS 212 PTZ once it is connected to the network. Simply navigate to the Bonjour bookmark in your browser (e.g. Safari) and click on the camera's link to access the Web pages. See page 13 for instructions on how to set the password. Note that you must install the AXIS 212 PTZ on the same network segment (physical subnet) as the computer handling the installation. Bonjour is a trademark of Apple Computer, Inc. ENGLISH AXIS Internet Dynamic DNS Service The AXIS Internet Dynamic DNS Service is a free service provided by Axis, which allows you to quickly and simply install your camera. More information about the AXIS Internet Dynamic DNS Service is available at www.axiscam.net Page 12 AXIS 212 PTZ Installation Guide Setting the IP address with ARP/Ping 1. Acquire an IP address on the same network segment your computer is connected to. 2. Locate the serial number (S/N) on the AXIS 212 PTZ product label. 3. Open a Command Prompt on your computer and enter the following commands (as appropriate for your operating system): Windows syntax: arp -s ping -l 408 -t Windows example: arp -s 192.168.0.125 00-40-8c-18-10-00 ping -l 408 -t 192.168.0.125 UNIX/Linux/Mac syntax: arp -s temp ping -s 408 UNIX/Linux/Mac example: arp -s 192.168.0.125 00:40:8c:18:10:00 temp ping -s 408 192.168.0.125 4. Check that the network cable is connected to the camera. Start/restart the camera by disconnecting and reconnecting power. 5. Close the Command prompt when you see `Reply from 192.168.0.125: ...' or similar. 6. Start your browser, type in http:// in the ...