User Installation and Assembly Instructions All Weather Design Speakers · Weatherproof high power two-way speaker systems. · Speaker systems feature high impact plastic housings and aluminum grilles. · Speakers include aluminum mounting brackets Installation A. Recommended wiring: 18 gauge copper wire (or heavier) B. Ensure that the speakers are installed on a surface sturdy enough to support their weight. Fasten properly & securely. C. Take into account the targeted listening area and potential safety hazards when choosing speaker installation and location. D. Speco Technologies assumes no liability for misinstalled speakers. E. Refer to below illustrations for assembly and installation instruction. Vertical Installation Horizontal Installation AWD Outdoor Speakers Specifications Model Woofer Tweeter Frequency SPL RMS Wattage Max Wattage Impedance Transformer SP-5AWD SP-5AWD-W 5.25" Polypropylene Coated Rubber Surround 1/2" PEI Tweeter 60Hz-20kHz 88 db 1w/1m 40 Watt 80 Watt 8 ohms SP-5AWD/T SP-5AWD/T-W 5.25" Polypropylene Coated Rubber Surround 1/2" PEI Tweeter 60Hz-20kHz 88 db 1w/1m 40 Watt 80 Watt 8 ohms 70V/25V (30W/ 15W/ 7.5W/ 3.75W) SP-6AWD SP-6AWD-W 6.5" Mica Coated Rubber Surround 1" Mylar Tweeter 54Hz-20kHz 89dB 1w/1m 50 Watt 100 Watt 8 ohms SP-6AWD/T SP-6AWD/T-W 6.5" Mica Coated Rubber Surround 1" Mylar Tweeter 54Hz-20kHz 89dB 1w/1m 50 Watt 100 Watt 8 ohms 70V/25V (30W/ 15W/ 7.5W/ 3.75W) For more information regarding service or return, contact: Speco Technologies 200 New Highway, Amityville, New York 11701 · Toll Free: 1-800-645-5516 · 631 957-8700 ...