User manual ONKYO TX-NR905 - INSTRUCTION MANUAL CORRECTIONS

TX-NR905 Insertion Sheet Page 1 Thursday, June 21, 2007 2:00 PM TX-NR905 Instruction Manual Corrections Picture Quality Menu The new "1­6. Picture Quality" item has been added to the "1. Input/Output Assign" menu. This menu and its settings can be accessed just like the other menus. The settings are explained below. Picture Mode DVD-Video disc content originates from either film (recorded at 24 frames per second) or video intended for TV (recorded at 30 frames per second). With the default Picture Mode setting of Auto, the AV receiver automatically detects the type of content and processes it accordingly to achieve the best picture quality. If the AV receiver detects the type of content incorrectly due to characteristics of the disc, you can select Video or Film manually. Auto: The type of content is detected automatically and processed accordingly (default). Video: Select when playing a DVD-Video disc whose content originates from film. Film: Select when playing a DVD-Video disc whose content originates from video. Edge Enhancement With Edge Enhancement, you can make the picture appear sharper. Off: Edge enhancement off (default). Low: Low edge enhancement. Medium: Medium edge enhancement. High: High edge enhancement. Mosquito NR With Mosquito Noise Reduction, you can remove the shimmering or haziness that sometimes appears around objects in the picture. Mosquito noise can be an issue with overly compressed MPEG content. Off: Mosquito noise reduction off (default). Low: Low mosquito noise reduction. Medium: Medium mosquito noise reduction. High: High mosquito noise reduction. Random NR With Random Noise Reduction, you can remove indiscriminate picture noise, such as film grain. Off: Random noise reduction off (default). Low: Low random noise reduction. Medium: Medium random noise reduction. High: High random noise reduction. Block NR With Block Noise Reduction, you can remove the block distortion that sometimes appears in the picture. Block noise can be an issue with overly compressed MPEG content. Off: Block noise reduction off (default). On: Block noise reduction on. Speakers B On page 8, it says: "While Powered Zone 2 is being used, or Speakers B is used, playback is reduced to 5.1channels (see page 119)." This is incorrect. Playback is not reduced to 5.1 channels when Speakers B is used. Speakers A or Speakers B can be used for up to 7.1channel playback. Also on page 8, in the "Main Room: Speakers A and Speakers B" illustration, the caption under "Surround back left and right speakers" says: "Cannot be used if Speakers B is used." This is incorrect. The surround back speakers can be used for up to 7.1-channel playback with Speakers A or Speakers B. On page 23, it says: "(Speakers B cannot be used if Speakers A is used for 7.1-channel playback.)" This is incorrect. Speakers A or Speakers B can be used for up to 7.1-channel playback. TX-NR905 Insertion Sheet Page 2 Thursday, June 21, 2007 2:00 PM Bi-amping Front Speakers B On page 29, "Bi-amping Front Speakers B," the speaker hookup illustration is incorrect. The explanation, however, is correct. Please use the following corrected illustration in conjunction with the explanation on that page. HDMI ASSIGNABLE AC INLET IN 1 OUT MAIN OUT SUB RS232 IN 4 IN 3 IN 2 ANTENNA COMPONENT VIDEO IN 3 Y IN 2 ASSIGNABLE ETHERNET FM75 AM IN 1(DVD) MONITOR OUT AUX 1 REMOTE CONTROL GAME/TV CBL/SAT VCR/DVR DVD MONITOR OUT V ZONE 2 OUT IR IN CB/PB V DIGITAL IN 1 ASSIGNABLE COAXIAL (DVD) 12V TRIGGER OUT ZONE 2 CR/PR IN IN OUT S S OUT IN IN IN IN OUT IN IN FRONT CENTER SURR SURR BACK FRONT CENTER SURR SURR BACK ZONE 2 ZONE 3 IN 2 (VCR/DVR) L IN 3 (CBL/SAT) L L R OPTICAL R PHONO CD ZONE2 R ASSIGNABLE R TAPE SURR BACK R Bi-AMP IN 1 (GAME/TV) AUX 1 GAME/TV CBL/SAT FRONT R VCR/DVR SURR R DVD SUBWOOFER MULTI CH SUBWOOFER PRE OUT FRONT L PRE OUT SURR BACK L Bi-AMP GND CENTER SURR L ZONE2 L ASSIGNABLE IN 2 (CD) OUT FRONT R (BTL) FRONT L (BTL) ZONE2 R ASSIGNABLE SURR BACK R Bi-AMP SURR BACK L Bi-AMP ZONE2 L ASSIGNABLE Tweeter (high) Woofer (low) Right speaker Left speaker Bridging Front Speakers B On page 30, "Bridging Front Speakers B," the speaker hookup illustration is incorrect. The explanation, however, is correct. Please use the following corrected illustration in conjunction with the explanation on that page. HDMI ASSIGNABLE AC INLET IN 1 OUT MAIN OUT SUB RS232 IN 4 IN 3 IN 2 ANTENNA COMPONENT VIDEO IN 3 Y IN 2 ASSIGNABLE ETHERNET FM75 AM IN 1(DVD) MONITOR OUT AUX 1 REMOTE CONTROL GAME/TV CBL/SAT VCR/DVR DVD MONITOR OUT V ZONE 2 OUT IR IN CB/PB V DIGITAL IN 1 ASSIGNABLE COAXIAL (DVD) 12V TRIGGER OUT ZONE 2 CR/PR IN IN OUT S S OUT IN IN IN IN OUT IN IN FRONT CENTER SURR SURR BACK FRONT CENTER SURR SURR BACK ZONE 2 ZONE 3 IN 2 (VCR/DVR) L IN 3 (CBL/SAT) L L R OPTICAL R PHONO CD ZONE2 R ASSIGNABLE R TAPE SURR BACK R Bi-AMP IN 1 (GAME/TV) AUX 1 GAME/TV CBL/SAT FRONT R VCR/DVR SURR R DVD SUBWOOFER MULTI CH SUBWOOFER PRE OUT FRONT L PRE OUT SURR BACK L Bi-AMP GND CENTER SURR L ZONE2 L ASSIGNABLE IN 2 (CD) OUT FRONT R (BTL) FRONT L (BTL) ZONE2 R ASSIGNABLE SURR BACK R Bi-AMP SURR BACK L Bi-AMP ZONE2 L ASSIGNABLE Right speaker Left speaker Printed in Japan I0706-1 SN 00000000 (C) Copyright 2007 ONKYO CORPORATION Japan. All rights reserved. *00000000*