AUDIO VIDEO SURROUND RECEIVER VR-506 VR-505 VR-517 KRF-V6050D KRF-V5050D KRF-V5550D INSTRUCTION MANUAL KENWOOD CORPORATION This instruction manual is used to describe multiple models listed above. Model availability and features (functions) may differ depending on the country and sales area. About the supplied remote control Compared to standard remote controls, the remote control supplied with this receiver has several operation modes. These modes enable the remote control to control other audio/video components. In order to effectively use the remote control it is important to read the operating instructions and obtain a proper understanding of the remote control and how to switch its operation modes (etc.). Using the remote control without completely understanding its design and how to switch the operation modes may result in incorrect operations. B60-4942-10 03 MA (K, P, Y, M, X, I) PR 0009 Additional Information Remote Control Operations Preparations Before applying the power Units are designed for operation as follows. Caution : Read this page carefully to ensure safe operation. 2 Unpacking Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost. Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unit was shipped to you directly, notify the shipping company without delay. Only the consignee (the person or company receiving the unit) can file a claim against the carrier for shipping damage. We recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the future. Keep this manual handy for future reference. U.S.A. and Canada ........................................... AC 120 V only Australia ........................................................... AC 240 V only Europe and U.K. ............................................... AC 230 V only China and Russia ............................................ AC 220 V only *Other countries ........... AC 110-120 / 220-240 V switchable Preparations * AC voltage selection The AC voltage selector switch on the rear panel is set to the voltage that prevails in the area to which the unit is shipped. Before connecting the power cord to your AC outlet, make sure that the setting position of this switch matches your line voltage. If not, it must be set to your voltage in accordance with the following direction. AC voltage selector switch Move switch lever to match your line voltage with a small screwdriver or other pointed tool. PLAY IN REC OUT PLAY IN Accessories FM indoor antenna (1) AM loop antenna (1) AC 220V 240V AC 110V 120V For VR-506 and KRF-V6050D Remote control unit (1) RC-R0615 Batteries (R6/AA) (2) L MONITOR OUT DVD VIDEO 1 VIDEO 1 R R B L 75µs AM 10kHz FM 100kHz 50µs AM 9kHz FM 50kHz DEEMPHASIS CHANNEL SPACE R A R L C L Note: Our warranty does not cover damage caused by excessive line voltage due to improper setting of the AC voltage selector switch. For VR-505 and KRF-V5050D Remote control unit (1) Batteries (R6/AA) (2) RC-R0511 Safety precautions WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. For VR-517 and KRF-V5550D Remote control unit (1) Batteries (R6/AA) (2) RC-R0617 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN *AC plug adaptor (1) *Use to adapt the plug on the power cord to the shape of the wall outlet. (Accessory only for regions where use is necessary.) CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS. THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. Microcomputer malfunction If operation is not possible or an erroneous display appears, even though all connections have been made properly, reset the microcomputer referring to "In case of difficulty". · Maintenance of the unit When the front panel or case becomes dirty, wipe with a soft, dry cloth. Do not use thinner, benzine, alcohol, etc. for these agents may cause discoloration. In regard to contact cleaner Do not use contact cleaners because it could cause a malfunction. Be specially careful not to use contact cleaners containing oil, for they may deform the plastic component. Before applying the power Contents Caution : Read the pages marked safe operation. carefully to ensure 3 Additional Information Before applying the power ................... 2 Safety precautions .............................................. 2 Unpacking .......................................................... 2 How to use this manual ...................................... 4 Special features .................................................. 4 In case of difficulty ........................... 39 Specifications ................................. 41 Names and functions of parts ................ 5 Remote control unit (RC-R0615) (VR-506/KRF-V6050D) ....................................... 6 Remote control unit (RC-R0511) (VR-505/KRF-V5050D) ....................................... 7 Remote control unit (RC-R0617) (VR-517/KRF-V5550D) ....................................... 8 Preparations Setting up the system ......................... 9 Connecting audio components ......................... 10 Connecting video components ......................... 11 Connecting a DVD player (6-channel input) ...... 12 Digital connections ........................................... 13 Connecting to the AV AUX jacks (VR-506/517/KRF-V6050D only) ....................... 14 Connecting the antennas .................................. 14 Connecting the system control ......................... 15 Connecting the speakers .................................. 16 Preparing the remote control ............................ 18 Speaker settings ............................................... 19 Normal playback .............................. 20 Preparing for playback ...................................... 20 Listening to a source component ..................... 21 Adjusting the sound .......................................... 21 For the U.S.A. FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. Recording ...................................... 22 Recording audio (analog sources) .................... 22 Recording video ................................................ 23 Recording audio (digital sources) ...................... 23 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ­ ­ Reorient or relocate the receiving antenna. ­ ­ Increase the separation between the equipment and receiver. ­ ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ­ ­ Consult the dealer or an experienced radio / TV technician for help. Operations Operations Listening to radio broadcasts ............... 23 Tuning radio stations ........................................ 23 Presetting radio stations manually .................... 24 Receiving preset stations .................................. 24 Receiving preset stations in order (P.CALL) ...... 24 Surround modes ............................................... 25 Surround play ................................................... 27 DVD 6-channel playback (VR-506/517/KRF-V6050D/V5050D) ................ 28 Convenient functions ........................................ 28 Basic remote control operations for other components(For VR-506/517/KRF-V6050D/ V5550D) ........................................ 30 Registering setup codes for other components ...................................................... 30 Operating other components ............................ 30 Setup code chart .............................................. 31 DVD player operation keys (For VR-505/KRF-V5050D) ............................... 32 Cassette deck, CD player & MD recorder operations (For VR-505/KRF-V5050D) ............. 33 Cassette deck, CD player & MD recorder operations (For VR-506/517/KRF-V6050D/ V5550D) ............................................................ 34 Other components' operations (For VR-506/517/ KRF-V6050D/V5550D) ..................................... 36 For the U.S.A. Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. Remote Control As an ENERGY STAR® Partner, Kenwood Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. This product can save energy. Saving energy reduces air pollution and lowers utility bills. Additional Information Remote Control Ambience effects .............................. 25 Operations Preparing for surround sound ............... 19 Preparations Before applying the power 4 How to use this manual This manual covers the VR-506, VR-505, VR-517, KRF-V6050D, KRFV5050D and KRF-V5550D. Items such as functions, number of jacks, and remote control details somewhat differ between these models. To confirm the functions available on the model you have purchased, refer to the table below. Model name Remote Control RC-R0615 RC-R0511 RC-R0617 Terminal Front input Equipped Not equipped Equipped (except KRFV5550D) Special features True home theater sound This receiver incorporates a wide variety of surround modes to bring you maximum enjoyment from your video software. Select a surround mode according to your equipment or the software you are going to play and enjoy! Dolby Pro Logic & Dolby 3 Stereo This surround system reproduces theater-like surround sound from . video software marked The PRO LOGIC mode uses the built-in adaptive matrix circuit to steer the Left, Center, Right and Surround channel audio signals. The 3 STEREO mode will redirect the Surround signal to the front left and right speakers when only the front and center speakers are used. Speaker out 2 systems (A, B) 1 system 1 system Preparations VR-506 KRF-V6050D VR-505 KRF-V5050D VR-517 KRF-V5550D Dolby Digital The DOLBY DIGITAL mode lets you enjoy full digital surround from software processed in the Dolby Digital format. Dolby Digital provides up to 5.1 channels of independent digital audio for better sound quality and more powerful presence than conventional Dolby Surround. This manual is divided into four sections, Preparations, Operations, Remote Control, and Additional Information. Preparations Shows you how to connect your audio and video components to the receiver and prepare the surround processor. We will guide you to make setting up your system as easy as possible. However, since this receiver works with all of your audio and video components, connecting the system can be fairly complex. DTS DTS (Digital Theater System) is a 5.1 channel digital audio format that provides five full-spectrum channels and one low-frequency (subwoofer) channel for unprecedented clarity, optimum channel separation and a (wide) dynamic range. In the DTS mode, the 5.1 channel digital input from a DTS CD, LD or DVD disc (carrying the "DTS" marking) can be played in Digital Surround. Important: When a DTS disc is played on a CD, LD or DVD player, noise may be output from the analog output. It is recommended that you connect the digital output of the player to the digital input of this unit. Operations Shows you how to operate the various functions av ...