Existing Network > New Network Vertical Stands and Rubber Feet Vertical stacking stands are provided so you can place your D-Link® Gaming Router in a vertical position. Rubber Feet are provided to allow proper ventilation when the D-Link® Gaming Router is placed horizontally or stacked upon other D-Link® stackable products. To attach the vertical stands, simply slide the vertical stands into the slotted grooves on the top and bottom panels of the D-Link® Gaming Router. To attach the rubber feet, simply press the rubber feet into the four corners on the bottom panel of the D-Link® Gaming Router. 300F/W L-4 A1 DG NA del: .:A1 00A Mo Ver L41 H/W :BG P/N .:XX Ver rity: Pola s. ding Rule : FCC itions ce. inclu the ial: feren . N 15 of two condreceived, Ser ce WA part ing ful inter ation TAI with follow feren oper harm IN liesto the e inter sired DE comp ct not causany unde pt e MAdevice subje accecaus is e may may This ation e must devic that Oper devicce 1FE This (1) This feren 966 (2) inter 55D Wireless Antenna Attach the wireless antenna to the rear panel of the DGL-4300 by turning the knob at the base of the antenna until it is fully attached. + RESET A 5v 2.5 t: GL41 Inpu A KA2D ) ID: 5V/2 cted ) FCC nne s (Co cted) nne tor er r ica d Blue (Co cted Powepto Ind Soli Blue (Conneffic) d D (Tra et Rec LE Power: Soli Blue Reson d Blue N: Soli Butt king WA : Blin and LAN adb Bro em (1-4) mod 45 087 523 293 537 00A1 000 MA C: Hardware Installation TCP/IP Settings IP Address: ____.____.____.____ Subnet Mask: ____.____.____.____ Default Gateway: ____.____.____.____ Primary DNS: ____.____.____.____ Secondary DNS: ____.____.____.____ 1 Unplug the power from your broadband modem and shut down your computer. 2 3 4 Disconnect the Ethernet cable connected from your computer to your broadband modem. Leave the end connected to your broadband modem attached. Connect the end of the Ethernet cable removed from your computer to the WAN port on the router. PPPoE Settings Name: __________________ Password: __________________ Connect the provided Ethernet cable from a numbered port on the router to your computer. 5 Plug the power back into your broadband modem and wait for the broadband modem to sychronize to the network (refer to the Modem manual for information on this). Telephone · 800-361-5265 (Monday through Friday, 7:30am to 12:00am EST) World Wide Web · http://support.dlink.ca E-mail · support@dlink.ca 6 Plug the power adapter (provided with the router) into the router, then connect the other end to a power outlet and verify that the POWER LED on the router is on. Note: If the Power LED is not lit, verify that the power adapter is properly connected to the D-Link® Gaming Router and to a working power outlet. D-Link®'s website contains the latest user documentation and software updates for D-Link® products. D-Link® provides free technical support for customers within the United States and Canada for the duration of the product's warranty period. Please refer to the user manual on the CD-ROM and the Help section in the Gaming Router's web-based management interface for support. U.S. and Canadian customers can contact D-Link® Technical Support through our website or by phone. 7 8 Power on your computer. Canada Verify that the WAN and LAN port (corresponding to where the computer was connected in step 4) LED's are on. Note: If the WAN LED is not lit, check the connection of the Ethernet cable from the Broadband modem to the WAN port of the D-Link® Gaming Router as detailed in steps 2-3. If the LAN LED is not lit, check the connection of the Ethernet cable as detailed in step 4. Telephone · 877-453-5465 (Twenty four hours a day, seven days a week) World Wide Web · http://support.dlink.com E-mail · support@dlink.com 9 10 Launch your web browser and type in a web address such as http://games.dlink.com to verify that you have an Internet connection. Support United States If a web address is not accessible, enter http://192.168.0.1 in your web browser address bar. Once the main screen appears, press the button labeled Internet Connection Setup Wizard and proceed through the wizard. For additional details on the Internect Connection Setup Wizard, please refer to the User Manual on the CD-ROM © 2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. Version 1.0 Revised 11/25/2004 ...