This product can be setup using any curren Web browser i.e., ent owser, any current Web browser, i.e., Internet Explorer 6 or Netscape Navigator 6.2.3 or above DSL-G604T Wireless ADSL Router Before You Begin: Please read and make sure you understand all the prerequisites for proper installation of your new ADSL Router. Have all the necessary information and equipment on hand before beginning the installation. Check Your Package Contents DSL-G604T Wireless ADSL Router CD-ROM with Manual Ethernet Cable Telephone Cord 802.11g Antenna 12V AC, 1.2A Power Adapter Using a power supply with a different voltage rating will damage this product and void its warranty. If any of the above items are missing, please contact your reseller. ©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DSL-G604T.12062004 Hardware Overview Front Panel Power LED: Solid light indicates a connection to a good power connector. ADSL LED: Lights solid when sychronized with the ADSL connection. Status LED: A blinking light indicates normal operation. If this light is not lit and the power light is on, this indicates failure. WLAN LED: This LED blinks to indicate wireless activity. LAN Ports: A solid light indicates a connection on the associated port. A blinking light indicates activity on the associated port. 2 Hardware Overview (continued) Rear Panel Wireless Antenna: Used for wireless communication. ADSL Port: Connects to your telephone jack using a standard telephone cord. LAN Ports: Your computers connect here using standard Ethernet cables. Reset Button: Resets the DSL-G604T to the factory default settings. Hold for seven seconds for the unit to factory reset. Power Receptor: The AC Power Adapter connects here. 3 Hardware Installation Step a Step b Step ac Step 4 Hardware Installation (continued) Step a Connect the telephone cord from your phone jack to the ADSL port on the DSL-G604T. Step b Connect an Ethernet cable from your computer to a LAN port on the DSL-G604T. Step c Connect the power adapter to the power connector on the DSL-G604T and the other end to a known good power source. 5 Using the Setup Wizard Step a Launch your Web browser (a shortcut is typically found on your desktop). Step b Type http://192.168.1.1 into the URL address box and press the Enter or Return key. Step c Admin is the default User Name and Password. Type admin into the User name and Password fields. Click OK Step d Click Run Wizard 6 Using the Setup Wizard (continued) Step e Click Next Step f This screen allows you to enter a new password for the admin account. This password is used to log into the web-based management interface. Click Next Step g Select your Time Zone Click Next 7 Using the Setup Wizard (continued) You will need to select the Internet Connection Type. If you are unsure which type of Internet Connection you have, please contact your Internet Service Provider. There are four connection modes and settings vary depending on the connection type. 2c 1. Dynamic IP Address - see Step h1 Dynamic IP Address on page 8. 2. Static IP Address - see Step h2 Static IP Address on page 9. 3. PPPoE/PPPoA - see Step h3 PPPoE/PPPoA on page 9. 4. Bridge Mode - see Step h4 Bridge Mode on page 10. A checklist of necessary settings is provided in the Appendix. Contact your Internet Service Provider to obtain the necessary details. Step h Select your Connection Type and proceed to step h1, h2, h3, or h4 depending upon your connection type. Click Next Step h1 Dynamic IP Address The DSL-G604T defaults to the most commonly used values in the United States. Note: If the MAC address does not appear, please refer to the User Manual on the CD-ROM. Click Clone MAC Address Click Next 8 Using the Setup Wizard (continued) Step h2 Static IP Address The DSL-G604T defaults to the most commonly used values in the United States. The IP address information on the right is only shown as an example of the format that you will use. Click Next Step h3 PPPoE/PPPoA The DSL-G604T defaults to the most commonly used values in the United States. Only modify these settings if you are sure they need to be changed. The User Name and Password will be unique to your Internet account. If you forget your account information, please contact your Internet Service Provider. Click Next 9 Using the Setup Wizard (continued) Step h4 Bridge Mode Click Next Step i Click Restart Step j Configuration is complete! Type in a URL such as www.dlink.com to test your connection. 10 Appendix - Settings Checklist Your ISP has provided you one of the four methods listed on the right for connecting to the Internet. You may need to contact them to find out which method you are using and fill in the appropriate details. Step H1 - Dynamic IP Address VPI:_____ VCI:_____ Connection Type: 1483 Bridged IP LLC 1483 Bridged IP VC-Mux Step H2 - Static IP Address VPI:_____ VCI:_____ IP Address: Subnet Mask: ISP Gateway Address: Primary DNS: Secondary DNS: Connection Type: 1483 Bridged IP LLC 1483 Bridged IP VC-Mux 1483 Routed IP LLC 1483 Routed IP VC-Mux IPoA ____.____.____.____ ____.____.____.____ ____.____.____.____ ____.____.____.____ ____.____.____.____ Step H3 - PPPoE/PPPoA User Name: _____________________ Password: VPI:_____ VCI:_____ Connection Type: PPPoE LLC PPPoA LLC PPPoA VC-Mux _____________________ Step H4 - Bridged Mode VPI:_____ VCI:_____ Connection Type: 1483 Bridged IP LLC 1483 Bridged IP VC-Mux 11 echnical Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone. Tech Support for customers within the United States: D-Link Technical Support over the Telephone: (877) 453-5465 24 hours a day, seven days a week D-Link Technical Support over the Internet: http://support.dlink.com email:support@dlink.com Tech Support for customers within Canada: D-Link Technical Support over the Telephone: (800) 361-5265 Monday to Friday 7:30am to 12:00am EST D-Link Technical Support over the Internet: http://support.dlink.ca email:support@dlink.ca