User manual NETGEAR FS726TP - Install Guide

3. Click Install SmartWizard. Follow the prompts to complete the installation of the SmartWizard GearDiscovery utility. 4. Click OK when done. Start Here Follow these instructions to set up your smart switch. Next, Connect Your Smart Switch in the Correct Order Note: These instructions assume you are using DHCP in your network. If you are using static IP addressing in your network, configure the switch IP address before connecting it to your network. In the absence of a DHCP server, the switch will default to 192.168.0.239 for its IP address. To configure the switch before connecting it to your network, set up the PC with an IP address in the 192.168.0.x subnet, and connect the PC to the switch. Then, use the Smartwizard Discovery utility as illustrated below to configure the switch. 1. Connect the smart switch to your network. Prepare to Install Your Smart Switch · · Prepare a PC with an Ethernet adapter and a CD ROM drive. Before proceeding with the smart switch installation, familiarize yourself with the contents of the Resource CD, especially the manuals. Now, Configure the Switch with the SmartWizard Discovery Utility 1. Double click the SmartWizard GearDiscovery icon on your desktop or in Windows Start menu Programs to run the utility and view this screen. First, Install the Smartwizard Discovery Utility on a PC 1. Power on your PC, let the operating system boot up completely, and log in as needed. 2. Insert the Resource CD for the Smart Switch Series into your CD-ROM drive. The CD main page shown below will load. 2. Power on the switch. 3. Verify that the PC with the SmartWizard GearDiscovery utility is on the same subnet as the switch. 2. Click Discover to find your switch in the network. After you log in to the switch, the main Web Access menu displays. Make sure the Ethernet cables are securely plugged in. For each powered on computer connected to the smart switch with a securely plugged in Ethernet cable, the corresponding smart switch LAN port status light will be lit. Make sure the network settings of the computer are correct. In most cases, computers should be configured to obtain an IP address automatically via DHCP. For help with this, please see the animated tutorials on the CD or the Reference Manual Appendix C on the CD. The SmartWizard GearDiscovery utility finds the switch and displays its MAC Address, IP Address, and model number. If you cannot configure your switch, verify that the cable connections are secure, that the IP address configuration of the PC is in the same subnet as the switch, and click the Discover button. 3. Click to select the line displaying the details of your switch. If there are multiple smart switches in your network, be sure to select the one you want to configure. 4. Click Web Access to view the switch log in screen. If your network uses static IP addresses, be sure the switch and computer are configured with valid IP addresses. Technical Support Use the configuration menu options to configure your switch. Thank you for selecting NETGEAR products. Register Your Product To register, go to: http://www.NETGEAR.com/register Go to http://www.NETGEAR.com/support for support information. Power Over Ethernet Option If your switch includes the Power over Ethernet option, such as the FS726TP, you can use it to power Ethernet devices like VoIP desk phones or suitably equipped wireless access points. Simply plug a Cat5 or better cable into the port and the switch will determine if it is safe to provide power along with the data. See the hardware guide for more details. 5. Enter the default password of password in lower case letters and click Login. The switch will display the switch settings main page. Configure the switch for your network. Consult the manual on the CD or the online help in the switch for assistance with configuration procedures. Troubleshooting Tips Here are some tips for correcting simple problems you may have. Be sure to power on your PC and smart switch in the correct sequence. Follow this sequence. Turn off the smart switch and computer. First, turn on the smart switch and wait two minutes. Next turn on the computer. © 2005 by NETGEAR, Inc. All rights reserved. NETGEAR is a registered trademark of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice. June 2005