Envelope Feeder Type 2600 (Code: G556) For Machine Code: G056/G058/G073/G074/G091 INSTALLATION GUIDE Important ÌThis unit is a tray that slides into the optional Paper Feed Unit. Without the optional Paper Feed Unit, this Envelope Feeder cannot be used. ÌYour printer can have two optional Paper Feed Units. However, the Envelope Feeder must be used in the top-most optional Paper Feed Unit (tray 2) . It cannot be used in the bottom-most optional Paper Feed Unit (tray 3). ÌThe tray of the top most optional Paper Feed Unit is beneath the paper tray. ÌDo not slide more than one paper tray out at the same time. Having more than one paper tray filled with paper in a fully extended position could cause the machine to fall down. ÌCheck the printer nameplate to confirm the model code. Installation Guide (This sheet) 1 Pull out the second paper tray (tray 2) of the optional Paper Feed Unit until it stops. After that, lift it slightly, and then pull it out. Check the contents of the box for the following items: Description Envelope Feeder Q'ty 1 While lifting the front side of the Envelope Feeder, place the feeder into the printer. Then slide it into the printer until it stops. ZDDP340E Note Ì For information about loading paper, see "Loading Paper in the Optional Paper Tray" in the Printer Reference is provided as a PDF file on the CD-ROM labeled "Operating Instructions". ZDDP330E Important Ì The Envelope Feeder must be used in the top-most optional Paper Feed Unit (tray 2). Ì The tray of the top-most optional Paper Feed Unit is beneath the paper tray. Note Ì Keep the paper tray with paper in a cool dark place. Printed in Japan Copyright © 2000-2003 G556-8600B ...