This product can be set up using any current web browser, i.e., Internet Explorer 5x, Netscape Navigator 4x. DI-614+ D-Link AirPlusTM Wireless Broadband Router Before You Begin 1. If you purchased this router to share your high-speed Internet connection with other computers, you must have either an Ethernet-based Cable or a DSL modem with an established Internet account from an Internet Service Provider (ISP). 2. It's best to use the same computer that is connected to your modem for configuring the DI-614+ Wireless Router. The DI-614+ acts as a DHCP server and will assign all the necessary IP address information on your network. See Appendix at the end of this Quick Installation Guide or the Manual on the CDROM for setting each network adapter to automatically obtain an IP address. Check Your Package Contents These are the items included with your DI-614+ purchase: · DI-614+ Wireless Broadband Router · CD-ROM (containing Manual and Warranty) · Ethernet (CAT5 UTP/Straight-Through) Cable Using a power supply with a different voltage rating will damage and void the warranty for this product. · 5V DC, 2.5A Power Adapter If any of the above items are missing, please contact your reseller. ©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DI-614+.05082002 Connecting The DI-614+ Wireless Router To Your Network A. First, connect the power adapter to the receptor at the back panel of the DI-614+ and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation. B. Insert one end of an Ethernet cable to the WAN port on the back panel of the DI-614+ and the other end to the Ethernet port located on your Cable or DSL modem. The WAN LED light will illuminate to indicate proper connection. C. Insert an Ethernet cable to LAN port 1 on the back panel of the DI614+ and an available Ethernet port on the network adapter in the computer you will use to configure the DI-614+. The LED light for LAN Port 1 will illuminate to indicate proper connection. (Note: Some computers already have network adapters pre-installed.) D. Computers equipped with 802.11b wireless adapters will be able to connect to the DI-614+. The DWL-650+ AirPlus Wireless Cardbus Adapter and the DWL-520+ AirPlus Wireless PCI Adapter will be able to connect out of the box with the router using their default wireless settings. A. Receptor for Power Adapter C. LAN Port These are the connections for Ethernet cables to your Ethernetenabled computers. B. WAN Port This is the connection for the Ethernet Cable to Ethernet Port on the Cable or DSL Modem. D. Antennas Used to wirelessly connect to 802.11b adapters. Reset Button Pressing this button restores the router to its original factory default settings. Restart Your Computer Connecting Additional Computers To The DI-614+ Wireless Router Using additional Ethernet (CAT5 UTP) cables, connect your Ethernetequipped computers to the remaining Ethernet LAN ports on the back panel of the DI-614+. When you have completed the steps in this Quick Installation Guide, your connected network should look similar to this: Using The Setup Wizard Open your Web browser and type "http://192.168.0.1" into the URL address box. Then press the Enter or Return key. The logon pop-up screen will appear. Type "admin" for the username and leave the password field blank. Click OK Once you have logged in, the Home screen will appear. Click Run Wizard You will see the following screens. Click Next Step 1 - Set up your new password. You have the option to establish a password. Click Next Step 2 - "Choose your time zone", you will be prompted to select the type of Internet connection for your router (see next page). Click Next The Setup Wizard (continued) Select the type of Internet connection for your router. Select one of these settings If you are unsure of which setting to select, please contact your Internet Service Provider. Click Next If you selected Dynamic IP Address, this screen will appear: Click the "Clone MAC Address" button to automatically copy the MAC address of the network adapter in your computer. You can also manually type in the MAC address. What is a MAC address? Each network adapter has a discrete Media Access Control (MAC) address. Note that some computers and peripherals may already include built-in network adapters. Click Next If your ISP requires a Static IP Address, and this option is selected, then this screen will appear: Do not use Enter the IP address information originally provided to you by your ISP. You will need to complete all the required fields. the numbers displayed in these fields. They are only shown as an example. Click Next If your ISP uses PPPoE (Point-toPoint Protocol over Ethernet), and this option is selected, then this screen will appear: Enter in the username and password provided to you by your ISP. Click Next The Setup Wizard (continued) Wireless Setup The default wireless settings are: SSID = default Channel = 6 You can change these settings to match an existing wireless network. Click Next Encryption The DI-614+ is capable of three levels of wireless encryption - 64bit, 128-bit, and 256-bit. By default the encryption is disabled. You can change the encryption settings for more secure wireless communication. Click Next Your Setup is Complete! Click Restart Click Close You will be returned to the Home tab. Test Your Internet Connection Click Exit Then relaunch your Web browser (i.e., Internet Explorer or Netscape Navigator), to link to your favorite Web site to test your Internet connection. For additional settings or information, refer to the Advanced, Tools, or Status tabs on the web-management interface; or to the manual located on the CD-ROM. Technical Support You can find the most recent software and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States for the duration of the warranty period on this product. U.S. customers can contact D-Link technical support through our web site or by phone. D-Link Technical Support over the Telephone: (800) 758-5489 24 hours a day, seven days a week D-Link Technical Support over the Internet: http://support.dlink.com email: support@dlink.com APPENDIX To connect to the network, make sure the network adapter in your computer is configured properly. Here's how to configure the network adapter to obtain an IP address automatically for the DI614+ Wireless Router. For Microsoft Windows XP: Go to Start > right click on My Network Places > select Properties > Double-click on the Network Connection associated with the Ethernet adapter (i.e., D-Link DFE530TX+). Click Internet Protocol (TCP/IP) Click Properties Select Obtain an IP address automatically Click OK Restart your computer For Apple Macintosh OS X: Go to the Apple Menu and Select System Preferences. Click on Network Select Built-in Ethernet in the Show pull-down menu Select Using DHCP in the Configure pulldown menu Click on Apply Now The IP address information, the Subnet Mask, the Router's IP address and the Ethernet adapter address will appear.