NEC Solutions (America), Inc. Visual Systems 42VP4/42VP4D/42XM2 Installation Guide 42" Plasma Displays v3.7 Contents Product Description and Notes Ventilation Requirements Display Dimensions Front, Top & Bottom Rear Left & Right Side Display Dimensions w/Optional Speakers and Stand Dimensions w/Optional Flat Wall Mount Dimensions w/Optional Tilt Wall Mount Dimensions w/Optional Ceiling Mount Portrait Mode Connections Control Codes Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Product Description Plasma Display 42VP4/42VP4D: 853x480 42XM2: 1024x768 (XGA) Aspect Ratio: 16:9 Color Correction: NEC CCF (Capsulated Color Filter, in panel) and AccuCrimson (in front filter) Type: Resolution: Screen Surface: 42VP4/42XM2: Anti-Reflective 42VP4D: Anti-Glare Dimensions: 40"(W) x 24"(H) x 3.5"(D) Weight: 42VP4/42VP4D: 62.8 lbs 42XM2: 65.0 lbs Notes This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to be a step-by step procedure for installation. Any ceilings or walls must be strong enough to support the display and the installation must be in accordance with any local building codes. All mounts should make secure contact to wood studs. 4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally to fill the screen using the menus (see "Aspect Modes" in menus and user manual). Distances are in inches, for millimeters multiply by 25.4. Distances may vary ±5%. Maximum Tilt Angles Below are the maximum angles that the display can be tilted in both landscape and portrait mode Landscape Portrait 30° 10° Max Tilt www.necvisualsystems.com 42VP4/42VP4D/42XM2 Page 1 of 12 Ventilation Requirements (all models) Dimensions below are minimum required for proper ventilation. WALL 2" 2" WALL 2" WALL 2" 2" NOTE: The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and recommendations. www.necvisualsystems.com 42VP4/42VP4D/42XM2 Page 2 of 12 Display dimensions Ventilation Openings 0.63 1.69 0.38 34.69 0.38 1.69 0.63 1.14 0.98 1.42 40.08 1.30 1.38 36.76 0.98 Ventilation Openings Ventilation Openings 0.59 2.72 Ventilation Openings 0.79 3.11 0.63 1.69 0.38 23.27 34.55 3.95 33.25 16.81 5.53 33.03 0.81 3.50 0.63 www.necvisualsystems.com 42VP4/42VP4D/42XM2 Page 3 of 12 1.14 0.981.38 1.34 2.17 2.52 2.70 0.35 24.02 Display dimensions (cont.) 42VP4/42VP4D Rear View 9.61 4.13 20.87 Ventilation Openings 9.61 8-M4*14 MAX For Mount 5.12 17.35 M4*10 MAX For PC Option 12.83 1.78 5.12 1.65 8.78 Ventilation Openings Ventilation Openings 4.96 6.06 3.35 + AC IN - - + Ventilation Openings 8.78 1.65 19.21 42XM2 Rear View (rear ventilation different) 9.61 4.13 20.87 Ventilation Openings 9.61 8-M4*14MAX For Mount 5.12 1.67 17.52 M4*10 MAX For PC Option 1.67 4.96 1.77 4.02 1.65 8.78 12.83 1.77 4.02 Ventilation Openings Ventilation Openings 6.06 + AC IN - - + 8.78 1.65 19.21 www.necvisualsystems.com 42VP4/42VP4D/42XM2 Page 4 of 12 4.25 Ventilation Openings 4.96 5.12 4.72 4.25 4.96 4.72 VIDEO VIDEO 2 VIDEO 1 (IN/OUT) AUDIO 1 R Y DVI L L L Cb/Pb Cr/Pr R/ Cr/Pr VD (IN/OUT) RGB 2/DVD 2/HD 2 B/ G/ Y Cb/Pb HD RGB 1 RGB 3 DVD 1/HD 1 AUDIO 2 R AUDIO 3 R 3.50 External Control VIDEO 3 1.97 Display dimensions (cont.) Ventilation Openings www.necvisualsystems.com 0.40 0.40 0.06 1.57 IN OUT REMOTE 42VP4/42VP4D/42XM2 0.63 1.5° 0.37 Page 5 of 12 0.39 0.51 23.11 0.39 0.06 22.06 0.68 0.64 Dimensions with optional speakers and stand 47.20 3.54 0.02 Optional Speakers 0.02 3.54 0.75 4.41 0.53 1.30 4.41 13.58 11.42 4.37 11.42 13.58 1.97 4.96 2.58 14.59 www.necvisualsystems.com 42VP4/42VP4D/42XM2 Page 6 of 12 7.28 15.75 26.59 Dimensions with optional Flat Wall Mount Kit (FWMK) 2.51 6.02 3.51 8.0 12.0 4.0 16.0 4.0 12.1 8.1 Note: The mount holes are higher on the 42VP4/42VP4D/42XM2 than on the prior units due to a higher center of gravity. (mount pattern is the same) 42VP4/42VP4D/42XM2 mount holes are 0.24" higher than 42PD3(PX-42VP3) 42VP4/42VP4D/42XM2 mount holes are 0.83" higher than 42MP3(PX-42V3)/42MP4(PX-42XM1) www.necvisualsystems.com 42VP4/42VP4D/42XM2 Page 7 of 12 8.4 5.9 9.8 Dimensions with optional Tilt Wall Mount Kit (TWMK) 8.55 5.04 3.51 Tilt Range 15.0° 8.1 12.1 4.0 16.0 4.0 12.0 8.0 12.1 Depth at 15° Tilt Note: The mount holes are higher on the 42VP4/42VP4D/42XM2 than on the prior units due to a higher center of gravity. (mount pattern is the same) 42VP4/42VP4D/42XM2 mount holes are 0.24" higher than 42PD3(PX-42VP3) 42VP4/42VP4D/42XM2 mount holes are 0.83" higher than 42MP3(PX-42V3)/42MP4(PX-42XM1) www.necvisualsystems.com 42VP4/42VP4D/42XM2 8.4 5.9 9.7 Page 8 of 12 Dimensions with optional Ceiling Mount Kit (CMK) 2.5 1.5 0.5 12.2 16.0 12.0 + AC IN RIGHT - + LEFT { SPEAKERS MUST HAVE MORE THAN 7WATT RATING IMPEDANCE 6 OHM} Note: The mount holes are higher on the 42VP4/42VP4D/42XM2 than on the prior units due to a higher center of gravity. (mount pattern is the same) 42VP4/42VP4D/42XM2 mount holes are 0.24" higher than 42PD3(PX-42VP3) 42VP4/42VP4D/42XM2 mount holes are 0.83" higher than 42MP3(PX-42V3)/42MP4(PX-42XM1) www.necvisualsystems.com 42VP4/42VP4D/42XM2 Page 9 of 12 17.5 8.7 Portrait Mode Rotating the Display The display must be rotated clockwise so the input panel is at the bottom and vents are at the top. Rotating the display counter-clockwise will not allow the unit to cool properly and will void the warranty. Vents Rotate Clockwise Power Inputs Rotating Source Content Note: The display is not capable of rotating any source content. PC Pivot® software from Portrait Displays, Inc. (www.portrait.com) allows you to rotate the Windows operating system 90 degrees. This software installs in Windows on the PC and allows you to select landscape or rotate 90 degrees to portrait mode. Everything running in the Windows environment is also rotated. Note: All displays connected to the PC will have to support rotating to portrait mode. NTSC Video NTSC Video has to be brought into a PC with the appropriate hardware and software, and sent back out through the PC graphics output. The method to rotate the video would then be the same as above and done within the PC Windows environment. www.necvisualsystems.com 42VP4/42VP4D/42XM2 Page 10 of 12 LOCATED AT BOTTOM OF DISPLAY EXT. SPEAKERS External Control IN REMOTE OUT VIDEO VIDEO 1 (IN/OUT) VIDEO 2 AUDIO 1 R Y L Cb/Pb DVD 1/HD 1 Cr/Pr AUDIO 2 R R/ Cr/Pr L (MONO) RGB 2/DVD 2/HD 2 G/ B/ Y Cb/Pb HD RGB 1 VD (IN/OUT) AUDIO 3 R RGB 3 DVI (Digital RGB) L (MONO) VIDEO 3 (MONO) Connections www.necvisualsystems.com 42VP4/42VP4D/42XM2 POWER Page 11 of 12 Control Codes Function POWER INPUT SWITCH ON OFF VIDEO1 (BNC) VIDEO2 (RCA) VIDEO3 (S-Video) DVD1/HD1 (RCA/Component) DVD2/HD2 (5BNC/Component) RGB1 (15pin HD) RGB2 (5BNC/RGB) RGB3 (DVI) ON OFF NORMAL THEAT.1 THEAT.2 DEFAULT STADIUM ZOOM NORMAL FULL ON OFF ON OFF Code Data 9FH 80H 9FH 80H DFH 80H DFH 80H DFH 80H DFH 80H DFH 80H DFH 80H DFH 80H DFH 80H 9FH 80H 9FH 80H DFH 80H DFH 80H DFH 80H DFH 80H DFH 80H DFH 80H DFH 80H DFH 80H DFH 80H DFH 80H DFH 80H DFH 80H 60H 60H 60H 60H 60H 60H 60H 60H 60H 60H 60H 60H 60H 60H 60H 60H 60H 60H 60H 60H 60H 60H 60H 60H 4EH 4FH 47H 47H 47H 47H 47H 47H 47H 47H 3EH 3FH 0AH 0AH 0AH 0AH 51H 51H 51H 51H 7FH 7FH C1H C1H 00H 00H 01H 01H 01H 01H 01H 01H 01H 01H 00H 00H 01H 01H 01H 01H 01H 01H 01H 01H 03H 03H 01H 01H CDH CEH 01H 02H 03H 05H 06H 07H 08H 0CH BDH BEH 01H 02H 03H 04H 02H 03H 04H 05H 03H 03H 01H 02H 08H 09H 0AH 0CH 0DH 0EH 0FH 13H AUDIO MUTE PICTURE MODE SCREEN MODE: AUTO PICTURE CINEMA MODE CBH CCH CDH CEH 13H 14H 15H 16H 09H 09H 82H 83H 00H 01H 4DH 4EH NOTE: Contact your NEC rep for codes not listed. NOTE: Use a cross/reverse/null modem cable. Cable Connection Communication Protocol: Interface: Communication: Baud Rate: Data Length: RS-232C Asynchronous 9600 bps 8 bits Parity: Stop Bit: Communication Code: Odd 1 bit Hex PC Control Connector (D-Sub 9P) To TxD of PC To RxD of PC To GND of PC 1 2 67 3 8 4 9 5 To RTS of PC To CTS of PC NOTE: Jumper "Request to send" and "Clear to Send" together on both ends of the cable to simplify cable connection. www.necvisualsystems.com 42VP4/42VP4D/42XM2 Page 12 of 12 ...