User manual NEC VT660K - Installation Guide

NEC Solutions (America), Inc. Visual Systems VT46/460/465/560/660/660K Installation Guide Desktop and Ceiling Mounted v2.0 Contents Product Description, Lens Specs, Notes and Formulas Diagrams and Distance Charts Ceiling Mounted Installation Desktop Setup Cabinet Dimensions Top, Front and Right Side Bottom, Back and Left Side Ceiling Mount Dimensions Control Codes Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Product Description Type: 3 panel LCD projector VT46/460/465/560: 0.7" p-Si TFT VT660/660K: 0.7" p-Si TFT wMLA Resolution: VT46/460/465: 800x600 (SVGA) VT560/660/660K: 1024 x 768 (XGA) Dimensions: 12.2"(W) x 3.9"(H) x 9.6"(D) Weight: 6.5 lbs Brightness: VT46: VT460: VT465: VT560: VT660: VT660K: 1200 ANSI Lumens 1500 ANSI Lumens 1800 ANSI Lumens 1300 ANSI Lumens 1700 ANSI Lumens 2000 ANSI Lumens Lens Specifications Throw Ratio: 1.5 - 1.8:1(for 100" diagonal) Offset Angle: 9.5°-11.4° (for 100" diagonal) Screen Sizes: 21"-300" Focal Length: 21.6mm ­ 25.9mm F/#: 1.7 ­ 2.0 Manual Zoom / Manual Focus Notes For screen sizes not indicated on the projection charts, use the formulas below. If a value in a chart does not match the results of the formulas, use the values in the chart. The ceiling must be strong enough to support the projector and the installation must be in accordance with any local building codes. All formulas are based on a 4:3 aspect ratio and screen. 4:3 sources can be displayed on a 16:9 screen without vertical "squeezing", see "Aspect Ratio" in the user manual. Distances are in inches, for millimeters multiply by 25.4. Distances may vary ±5%. Formulas (for a 4:3 screen) units: inches (for millimeters multiply final number by 25.4) Calculate projection values by plugging the screen width (H) into the projection formulas. Projection Formulas: B = 0.3023H C (wide) = 1.5165H ­ 1.357 C (tele) = 1.8197H ­ 1.629 D = 0.0727H (wide) = tan-1 (B/C(wide)) (tele) = tan-1 (B/C(tele)) Definitions: H = Horizontal Screen Width (4:3) V = Vertical Screen Height (4:3) B = Vertical distance between lens center and screen center C = Throw distance = Throw Angle Screen Formulas (4:3): H = V x 4/3 V = H x 3/4 Screen Diagonal = H x 5/4 www.necvisualsystems.com Page 1 of 7 Ceiling Mounted Installation The following diagram shows the relationship between projector position and the screen. Refer to the chart below for data. Distances are in inches. For millimeters multiply by 25.4. C Throw Distance Screen Top Lens Ctr D *6.5" w/pipe connector *5.6" w/ceiling plate 4.9" B Screen Ctr Lens Offset from Mount Pipe *See page 6 for mount details 2.8" Distance Chart (for popular screen sizes) Screen Size (4:3) Diagonal inches B inches inches C wide - tele inches D inches wide - tele degrees Width(H) inches Height(V) 12.6 24 36 40.2 43.2 50.4 54 60 72 90 108 126 144 162 180 5.1 9.7 14.5 16.2 17.4 20.3 21.8 24.2 29.0 36.3 43.5 50.8 58.0 65.3 72.6 21 40 60 67 72 84 90 100 120 150 180 210 240 270 300 16.8 32 48 53.6 57.6 67.2 72 80 96 120 144 168 192 216 240 NA 47.2 71.4 79.9 86.0 100.6 107.8 120.0 144.2 180.6 217.0 253.4 289.8 326.2 362.6 - 28.9 56.6 85.7 95.9 103.2 120.7 129.4 143.9 173.1 216.7 260.4 304.1 347.8 391.4 435.1 1.2 2.3 3.5 3.9 4.2 4.9 5.2 5.8 7.0 8.7 10.5 12.2 14.0 15.7 17.4 NA 11.6 11.5 11.5 11.4 11.4 11.4 11.4 11.4 11.4 11.3 11.3 11.3 11.3 11.3 - 10.0 9.7 9.6 9.6 9.6 9.6 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 Note: For screen sizes not indicated on the chart, use the formulas on page 1. www.necvisualsystems.com Page 2 of 7 Desktop Setup The following diagram shows the relationship between projector position and the screen. Refer to the chart below for data. Distances are in inches. For millimeters multiply by 25.4. Screen Ctr B Lens Ctr Scrn Bottom C Throw Distance D 2.3" Projector Feet Distance Chart (for popular screen sizes) Screen Size (4:3) Diagonal inches B inches inches C wide - tele inches D inches wide - tele degrees Width(H) inches Height(V) 12.6 24 36 40.2 43.2 50.4 54 60 72 90 108 126 144 162 180 5.1 9.7 14.5 16.2 17.4 20.3 21.8 24.2 29.0 36.3 43.5 50.8 58.0 65.3 72.6 21 40 60 67 72 84 90 100 120 150 180 210 240 270 300 16.8 32 48 53.6 57.6 67.2 72 80 96 120 144 168 192 216 240 NA 47.2 71.4 79.9 86.0 100.6 107.8 120.0 144.2 180.6 217.0 253.4 289.8 326.2 362.6 - 28.9 56.6 85.7 95.9 103.2 120.7 129.4 143.9 173.1 216.7 260.4 304.1 347.8 391.4 435.1 1.2 2.3 3.5 3.9 4.2 4.9 5.2 5.8 7.0 8.7 10.5 12.2 14.0 15.7 17.4 NA 11.6 11.5 11.5 11.4 11.4 11.4 11.4 11.4 11.4 11.3 11.3 11.3 11.3 11.3 - 10.0 9.7 9.6 9.6 9.6 9.6 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 9.5 Note: For screen sizes not indicated on the chart, use the formulas on page 1. www.necvisualsystems.com Page 3 of 7 Cabinet Dimensions The following drawings show the cabinet dimensions. Dimensions are in inches. For millimeters multiply by 25.4. 1.64 1.86 2.89 3.50 3.82 3.91 1.64 3.50 2.18 9.06 9.64 www.necvisualsystems.com 2.26 9.31 Page 4 of 7 12.21 Cabinet Dimensions (continued) The following drawings show the cabinet dimensions. Dimensions are in inches. For millimeters multiply by 25.4. Rear View (VT460/465/560/660/660K) 1.54 1.69 4.92 5.12 1.77 M4*MAX8 For Mount Rear View (VT46) AUDIO AUDIO £ S-VIDEO VIDEO IN IN R R NEC AC IN ` L/MONO L/MONO AUDIO RGB IN PC CONTROL www.necvisualsystems.com Page 5 of 7 Optional Ceiling Mount Dimensions (Model #: VT60CM) The following drawings show ceiling mount dimensions. Dimensions are in inches. For millimeters multiply by 25.4. The VT60CM comes with a threaded pipe connector and a ceiling plate for flush mounting and minimal height. Pipe Connector 7.56 4.28 5.81 Ceiling Plate 7.56 3.40 5.81 www.necvisualsystems.com Page 6 of 7 Control Codes Function POWER ON POWER OFF INPUT SELECT RGB INPUT SELECT VIDEO INPUT SELECT S-VIDEO PICTURE MUTE ON PICTURE MUTE OFF SOUND MUTE ON SOUND MUTE OFF Code Data 02H 02H 02H 02H 02H 02H 02H 02H 02H 00H 01H 03H 03H 03H 10H 11H 12H 13H 00H 00H 00H 00H 00H 00H 00H 00H 00H 00H 00H 00H 00H 00H 00H 00H 00H 00H 00H 00H 02H 02H 02H 00H 00H 00H 00H 02H 03H 01H 01H 01H 12H 13H 14H 15H 01H 06H 0BH 09H 0EH 13H Cable Connection Communication Protocol: Baud Rate: 19200 bps Data Length: 8 bits Parity: No Parity Stop Bit: One bit X on/off: None Communications: Full duplex PC Control Connector (DIN-8P) To RxD of PC 8 5 2 7 4 1 6 3 To GND of PC To TxD of PC NOTE 1: Pins 2, 3, 5, 6 and 8 are used inside the projector. NOTE 2: For long cable runs it is recommended to set communication speed within projector menus to 9600 bps. www.necvisualsystems.com Page 7 of 7