Installation Instructions SP-CEIL-LM3X Ceiling Mount Kit for LP340/350 Projectors This kit makes it easy to hang your projector from the ceiling for fixed installation use in meeting, auditorium and training room settings. A unique quick-release feature allows you to take the projector down in seconds to replace the lamp or move the projector to another location. 1 1. Attach the Mounting Bracket to the projector With the projector on its top, loosely fasten the two quick release sleeves (E) to the projector. Use the two 4mm x 16mm Phillips screws (D). Position the mounting bracket (B) against the projector with the keyholes over the two screw heads (D). Move the bracket toward the rear of the projector to fully engage the screws in the narrow keyhole slots. Thread the 4mm x 10mm knurled knob screw (A) through the mounting bracket into the hole near the rear of the projector. Tighten all three screws securely. 1. 2 Install the Ceiling Mount Base Box on the Ceiling - NOTE - 2. Refer to the LiteMount False Ceiling Plate and LiteMount Pipe Tubing Extension installation instructions if you have purchased these items to reinforce a suspended ceiling or to position the projector away from the ceiling. Install these items before proceeding with the instructions below. ! - IMPORTANT Use appropriate hardware to ensure that the ceiling box is fastened securely to the ceiling. No hardware is included for this purpose. 3. ! 4. - IMPORTANT Projector installation must be performed by qualified personnel in compliance with local building code requirements. These requirements take precedence over any instructions provided here. Ensure that the ceiling is capable of supporting a weight five times that of the projector. If it cannot, reinforce the ceiling to provide a safe installation. Examine the flanges on each side of the ceiling mount base box to identify its front and rear orientation on the ceiling. The holes near the edge of each flange will be closest to the rear of the projector when the installation is complete. Package Contents § § § § § § § § § § Installation instructions 1 ­ 4mm x 10mm knurled knob screw 1 ­ projector mounting bracket 2 ­ 4mm x 16mm Phillips screws 2 ­ 4mm quick release sleeves 1 ­ ceiling mount base box 2 ­ 6mm x 12 mm hinge pin bolts 2 ­ 6mm x 12mm angle locking bolts 2 ­ 6mm flat washers 2 ­ conical spacers REAR SIDE 2 2. 3. Install the Ceiling Mount Base Box on the Ceiling (cont.) Position the ceiling mount base box against the ceiling surface at the desired projector mounting location. Mark the location of the four mounting holes to be drilled in the ceiling. Remove the box from the ceiling. Drill four holes to accommodate the fasteners that attach the box to the ceiling. No fasteners are included for this purpose. Fasten the ceiling mount base box to the ceiling using hardware appropriate for the purpose. Ensure that all necessary cables to the projector pass from the ceiling and through the hole in the center of the ceiling mount base box. 4. Loosely thread the two 6mm x 12mm angle locking bolts (H) through the flanges on the projector mounting bracket. Adjust the rear of the projector up or down to attain the desired projection angle. Tighten the angle locking bolts (H) securely. Tighten the hinge pin bolts (G) securely. Limited Warranty InFocus Inc. warrants that each "ceiling mount" sold hereunder will conform to and function in accordance with the written specifications of InFocus. Said limited warranty shall apply only to the first person or entity that purchases the Product for personal or busines s use and not for the purpose of distribution or resale. The product may contain recycled components that are in new condition. Said warranty shall continue for a period of one (1) year from the date of such purchase. Proof of purchase is required for all warranty claims. InFocus does not warrant that the Product will meet the specific requirements of the first person or entity that purchases the Product for personal or business use. InFocus' liability for the breach of the foregoing limited warranty is limited to the repair or replacement of the Product or refund of the purchase price of the Product, at InFocus' sole option. To exercise the Purchaser's rights under the foregoing warranty, the Product must be returned at the Purchaser's sole cost and expense, to InFocus, and must be protected by packaging comparable to the original packaging. The Product must be accompanied by a written letter that includes (i) proof of date of purchase, (ii) the dealer's name, (iii) the part number of the accessory item or the projector/panel model num ber, (iv) your business card information, (v) explanation of how the item was damaged, and (vi) description of the damage and reason for the return. Please call InFocus or your dealer for information on where to send your case. InFocus will repair/replace and return the case within 10 days of receipt of the item. 5. 6. 7. 4. 5. 6. 7. Warranty Limitation and Exclusion InFocus shall have no further obligation under the foregoing limited warranty if the Product has been damaged due to abuse, misuse, neglect, accident, unusual physical stress, unauthorized modifications, tampering, alterations, or service other than by InFocus, causes other than from ordinary use or failure to properly use the Product in the application for which said Product is int ended. 3 1. Hang the Projector on the Ceiling Raise the projector to the ceiling mount base box on the ceiling. Ensure that the front of the projector matches the front side of the ceiling mount base box. Align the flange slots on the projector mounting bracket with the holes in the sides of the ceiling mount base box. Loosely fasten the projector mounting bracket to the ceiling mount base box using the two 6mm x 12mm hinge pin bolts (G) with 6mm flat washers (I) and conical spacers (J). ©2000 by InFocus Corp. All rights reserved. Disclaimer of Unstated Warranties To Remove the Projector from the Ceiling 1. Remove the 4mm x 10mm knurled knob screw (A) from the projector mounting bracket. Move the projector forward to disengage the projector from the quick release sleeves (E) on the mounting bracket. Carefully lower the projector away from the ceiling. 2. The warranty printed above is the only warranty applicable to this purchase. All other warranties, express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. There are no warranties that extend beyond the face hereof and the foregoing warranty shall not be extended, altered or varied except by written instrument signed by InFocus. 3. 2. Limitation of Liability It is understood and agreed that InFocus' liability whether in contract, in tort, under any warranty, in negligence or otherwise shall not exceed the return of the amount of the purchase price paid by purchaser and under no circumstances shall InFocus be liable for special, indirect or consequential damages or lost profits, lost revenues, or lost savings. The price stated for the product is a consideration in limiting InFocus' liability. No action, regardless of form, arising out of the agreement to purchase the product may be brought by purchaser more than one year after the cause of action has accrued 3. 27700B SW Parkway Ave. Wilsonville, OR 97070 1-800-294-6400 www.infocus.com 009-0537-00 009-0537-00 009- 0537- ...