User manual MOTOROLA H560 - MANUAL

BEFORE YOU BEGIN Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions. Take a moment before you get started to familiarize yourself with your new H560 Headset. motorola H560 Volume Buttons Ear Speaker Microphone Quick Start Guide Call Button Power Switch Indicator Light 1 CHARGE Your Headset's Battery 2 START BLUETOOTH FEATURE Your Phone Your phone's Bluetooth feature is off by default. To use your headset, you must turn on the Bluetooth feature in your phone. 1 Verify slide switch is in the off position (toward the charging port). For most Motorola phones (at the main menu): 1 Press M (Menu) > Settings > Connection > Bluetooth Link > Setup. 2 Plug the Motorola charger into the end of the headset. The indicator light turns red or yellow when the battery is charging. It may take up to 1 minute for the indicator light to turn on. When the headset's battery is fully charged (about 2 hours), the indicator light turns green. 2 Scroll to Power. 3 Select Change. 4 Scroll to On. 5 Press Select to turn on the Bluetooth feature. The Bluetooth feature remains on until you turn the feature off. Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide. 3 Disconnect the charger. Note: Headset is not functional while charging. Note: This product uses a lithium ion, rechargeable, non-replaceable battery. Under normal use, the expected life of the rechargeable battery is approximately 400 charges. 3 PAIR Your Headset Before you can use your headset, you must pair (link) it with your phone. Step A - ENSURE HEADSET IS IN PAIRING MODE Power on headset by sliding the Power switch towards the microphone to initiate easy pairing. After a few moments, the indicator light will be steadily lit in blue to indicate headset is in pairing mode. Indicator Light (steady blue for pairing) If the headset does not enter pairing mode, see TROUBLESHOOTING for help. Motorola, Inc. Consumer Advocacy Office 1307 East Algonquin Road Schaumburg, IL 60196 www.motorola.com 1-877-MOTOBLU 1-888-390-6456 (TTY/TDD United States for hearing impaired) Guide Number: 6809518A53-A Your Phone Step B - SET YOUR PHONE TO LOOK FOR YOUR HEADSET For most Motorola phones: 3 PAIR CONTINUED 1 On your Motorola phone, press M (Menu) > Settings > Connection > Bluetooth Link > Handsfree > Look for Devices. The phone lists Bluetooth devices it finds. 2 Select Motorola H560. 3 Select OK or Yes to pair your headset with Bluetooth QD ID: B014245 MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. © 2008 Motorola, Inc. All rights reserved. 4 5 your phone. Enter the passkey: 0000 Select OK. When your headset successfully pairs and connects with your phone, the indicator light changes from steadily lit to flashing blue and purple. Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide. 4 TEST AND USE USING YOUR H560 See Features and Functions Guide on the reverse side for information on using your H560 Your phone and headset are now paired and ready to make and receive calls. To make a call: 1 Place the headset over your ear. 2 On the phone, dial the number you want to call and press SEND key on your phone. If your phone and headset are successfully paired, you will hear ringing on the headset. After you have successfully paired your phone and headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON. Note: If desired, your headset can be restored to original factory settings. This action will erase all pairing information stored in your headset. Thus, you will need to pair your phone and headset again (see step 3). Note: To restore your headset to original factory settings, press and hold both Volume buttons and the Call button at the same time for 10 seconds. TROUBLESHOOTING My headset will not enter pairing mode. Make sure that any devices previously paired with the headset are turned off. If the indicator light is not steadily lit in blue, turn off both the other device and headset, wait 10 seconds, then turn headset back on. Wait for the indicator light to become steadily lit in blue, indicating the headset is now in pairing mode. My phone doesn't find my headset. Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices (see step 3). My headset worked before but now it's not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3). Support. If you need more help, contact us at 1-877-MOTOBLU or visit us at www.motorola.com/Bluetoothsupport Features and Functions Guide H560 Bluetooth® Handsfree Headphones TURNING HEADSET ON AND OFF To turn your headset on, slide the switch toward the indicator light. The indicator light flashes blue three times, then flashes in blue and purple (if connected with a device) or is steadily blue (if ready to be paired). To turn your headset off, slide the switch toward the charging plug (the orange color under the switch is displayed). The indicator light flashes three times then turns off. IMPORTANT: Be sure to first follow the Quick Start Guide on the reverse side of this guide to complete initial setup of your H560. Power Switch Indicator Light EARBUDS AND YOUR HEADSET Your H560 headset is supplied with multiple earbuds. The earbud is fitted onto the end of your headset's earpiece speaker, and placed onto your ear when using your headset. WEARING THE HEADSET To wear your headset, flex the earhook and loop it over your ear as shown. Your headset's performance is greatly dependent upon achieving a good fit on your ear. Therefore, we recommend trying all the supplied earbuds with your headset. Be sure to position the ear cushion into your ear canal for optimal audio performance and comfort. CHANGING FOR USE ON OTHER EAR You can wear your H560 headset on your left or right ear. The headset comes ready for the right ear. To change the headset for the left ear: CHANGING VOLUME BUTTON ORIENTATION You can also change the orientation of the volume buttons on your headset. 1 Turn the headset power off. 2 Press and hold the Volume button you want to assign as the "volume up" button and slide the switch toward the microphone. The indicator light flashes blue three times, then steady blue. When connected, it will flash blue/purple. 1 Gently lift and pull the top of the earhook up and off speaker stem, as shown. 2 Flip the headset over. 3 Attach the earhook to the speaker stem, as shown. Volume Buttons Indicator Light European Union Directives Conformance Statement Hereby, Motorola declares that this product is in compliance with: · The essential requirements and other relevant provisions of Directive 1999/5/EC. · All other relevant EU Directives. QUICK BATTERY CHECK When not on a call, you can check your headset's battery charge level by pressing and holding both Volume buttons. The indicator light displays charge status for 5 seconds. See below for details on indicator light and charge status. Headset Indicator Red Yellow Green Talk Time Less than 2 hours Between 2 to 5 hours Up to 7 hours Product Approval Number The above gives an example of a typical Product Approval Number. You can view your product's Declaration of Conformity (DoC) to Directive 1999/5/EC (to R&TTE Directive) at www.motorola.com/rtte. To find your DoC, enter the product Approval Number from your product's label in the "Search" bar on the web site. To save battery power, turn OFF the headset when you don't use it for an extended time by sliding the switch towards the charging plug. MAKING CALLS Function Receive a call Mute or unmute a call Action Tap the Call button Tap both Volume buttons Reject a call Press and hold a Volume button until the ringer stops End a call Tap the Call button Redial last call Press and hold the Call button until you hear two tones Make a voice dial call Tap the Call button and wait for voice prompt Answer second incoming Use phone to answer call (follow your phone's instructions) Note: Your H560 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information. Note: Some features are phone/network dependent. INDICATOR LIGHT With the Charger Plugged In Headset Indicator Headset Status Red Charging (battery level less than 50% charge) Yellow Charging (battery level more than 50% charge) Green Charging complete INDICATOR LIGHT With No Charger Plugged In Headset Indicator Off Three blue flashes Steady blue Rapid blue/purple flashes Quick blue flash Slow blue pulse Slow blue flash Slow red flash Slow purple pulse Steady red Quick red flash Headset Status Power off Powering on/off Pairing/connect mode Connection successful Incoming/outgoing call Connected (on a call) Standby (not on a call) Idle (not connected to phone) Connected call muted Attempting to connect Low battery AUDIO TONES Audio Tone Ascending tone Two descending tones Ring tone Two short tones when pressing Volume button High/low tones repeated every 60 sec. No audio indications; deteriorating quality Two ascending tones Two rapid ascending tones Two rapid descending tones Low tone every 10 seconds Headset Status Powering on Powering off Incoming call Volume at minimum or maximum Low battery Out of range Connected to phone Mute enabled Mute disabled Mute reminder Note: After 20 minutes on a call or of inactivity, the light stops flashing to conserve power, but the headset remains on.