User manual MAGELLAN MAP 410 - MAPSEND

Copyright Notice Copyright 1999 Magellan Corporation. All rights reserved. No part of this publication or the computer programs described within may be reproduced, translated, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical photocopying, recording, or otherwise, without prior written permission from Magellan Corporation. Your rights with regard to this publication and the computer programs described within are subject to the restrictions and limitations imposed by the copyright laws of the United States of America ("U.S.A") and/or the jurisdiction in which you are located. For information on translations and distribution outside the U.S.A. please contact Magellan Corporation. Trademark Notice MapSend is a trademark of Magellan Corporation. All other product and brand names are trademarks or registered trademarks of their respective holders. Printed in the United States of America. Part Number: 630750 A Table of Contents INTRODUCTION .................................................................................... 1 THE MAGELLAN MAPSEND CD ...................................................... 1 MARINE CD ............................................................................... 2 LAND CD ................................................................................... 2 UNLOCKING A C-MAP NT COMPACT REGION - QUICK REFERENCE .... 3 GETTING STARTED ............................................................................... 4 MINIMUM PC REQUIREMENTS ......................................................... 4 INSTALLATION PROCEDURES ............................................................ 4 STARTING MAPSEND ...................................................................... 4 USING HELP .................................................................................. 5 MAPSEND MENU ........................................................................... 5 MAPSEND OPTIONS ........................................................................ 6 THE TOOLBAR .............................................................................. 10 THE STATUS WINDOW .................................................................. 10 NAVIGATING THE MAP ................................................................... 11 SELECTING (OPENING)/REMOVING A C-MAP REGION ...................... 12 PREVIEW MODE ........................................................................... 12 NT COMPACT FULL FEATURES DEMO MODE ................................... 12 SELECTING (OPENING) A REGION ................................................... SELECTING FROM THE MAP ......................................................... SELECTING FROM THE LIST ......................................................... REMOVING A REGION .................................................................... 12 13 14 15 UPLOADING REGIONS TO YOUR MAP 410 ......................................... 16 CONNECTING YOUR MAP 410 TO YOUR PC ................................. 16 STARTING UPLOAD ....................................................................... 16 INTERRUPT UPLOAD ...................................................................... 17 END UPLOAD ............................................................................... 17 TYPES OF REGIONS ....................................................................... UNLOCKED REGIONS .................................................................. LOCKED REGIONS ...................................................................... INFORMATION ON REGIONS ......................................................... CHART OBJECTS INFORMATION .................................................... UNLOCKING CODE REQUEST ....................................................... INSERT AN UNLOCKING CODE ..................................................... UNLOCKING CODES BACKUP ...................................................... RESTORE UNLOCKING CODES FROM BACKUP ............................... PRINT UNLOCKING CODE LIST .................................................... 18 18 18 18 19 20 20 21 21 21 UNLOCKING CODE ............................................................................. 20 POINTS OF INTEREST (POI) ............................................................... 22 POINTS OF INTEREST ..................................................................... 22 ROADS ........................................................................................ 23 SESSIONS ........................................................................................... 24 ADDING A REGION TO SESSION ...................................................... 24 REMOVING REGIONS FROM SESSION ............................................... 25 PREVIEW ..................................................................................... 25 TROUBLESHOOTING ........................................................................... 26 CONTACTING C-MAP & MAGELLAN ................................................ 27 C-MAP ...................................................................................... 27 MAGELLAN .................................................................................. 28 INTRODUCTION Congratulations on your purchase of MapSendTM allowing you to expand the use of your MAP 410. MapSend is a CD with an application program that contains C-MAP's NT CompactTM Marine Electronic Charts (Marine CD) or enhanced road and Point of Interest detail (Land CD) which are uploaded to your MAP 410. This CD allows you to customize your receiver to fit all your boating and outdoor adventures. You will have the ability to download detailed C-MAP NT Compact nautical charts, superlakes and an additional 250,000 points of interest such as marinas, parks, campgrounds, tourist attractions and highway exit ramp services such as RV campgrounds, restaurants, ATM's and gas stations and more. With MapSend you can now expand the areas you are travelling by uploading nautical maps, superlakes and points of interest for a more comprehensive database. Making your way outdoors has never been so easy as it is with the additional information contained on this CD-ROM. This guide will aid in the installation of MapSend as well as give you directions on how to use this program to increase your ability to navigate new areas of interest. The Getting Started section of this guide will have you navigating the MapSend database in no time at all and give you the opportunity to upload those areas of the map that you will need for your next journey outdoors. THE MAGELLAN MAPSEND CD MapSend's CD-ROMs are a cartographic and information resource for you to use to aid you while navigating with your Magellan MAP 410 GPS receiver. Available in marine and land versions, these new databases of marine charts, land maps and Points of Interest (POI's) can now be uploaded into your receiver to enhance the cartographic database contained within. Some items contained within the MapSend database need to be "unlocked" by calling the nearest C-MAP office listed in the back of this guide. Using the procedure contained in the section Unlocking A C-MAP NT Compact Region, you can unlock regions of interest easily and inexpensively without having to buy different cartridges for each region and with the preview feature (available for Marine Charts and SuperLakes) you'll be able to preview a region to make sure it's the right one for you (see "Preview" under "Selecting (Opening)/Removing A C-MAP Region" for further details). Magellan MapSendTM User Guide 1 MARINE CD The MapSend Marine CD features C-MAP NT CompactTM charts which contain coastlines and fixed and floating navigation aids (NAVAIDS), such as lighthouses, buoys and channel markers as well as spot soundings, depth contours and hazards to navigation. Superlakes, large, fresh-water lakes, are also available in the NT CompactTM format. LAND CD The MapSend Land CD provides enhanced road detail and over 250,000 POIs. Included are golf courses, campgrounds, parks, airports, hunting and fishing facilities, tourist attractions, highway exit ramp services as well as Superlakes. 2 Magellan MapSendTM User Guide UNLOCKING A C-MAP NT COMPACT REGION - QUICK REFERENCE The following procedures apply for unlocking either marine NT Compact charts or SuperLakes. You can view the available marine coverage, select your choice and contact a C-MAP Office for the "unlock" code. Unlock Process for the First Unlock (Marine CD Only) Step 1 Step 2 Connect your MAP 410 to your PC. Ensure the baud rate on the MAP 410 is set to 4800bps (Use your MAP 410 User Guide to obtain the procedure for checking your receiver's baud rate). Open the desired chart region. MapSend will give you the code for this region in the Status Window. Enter the "Unit" menu and click on "Get MAP 410 ID". Note the serial number listed on the back of the CD. Call the nearest C-MAP office and tell them you wish to unlock a MapSend region. (See "Contacting C-MAP & Magellan" from this guide for available numbers). Alternatively, you may fax or e-mail your request to CMAP. You must provide them with the following information: · MAP 410 Unit ID (Serial #) · Chart Region # · CD Serial # for your free, first unlock or credit card information for additional unlocks. Step 7 Step 8 C-MAP will give you the unlock code over the phone, by fax, or email. Once you have the unlock code from C-MAP, doubleclick on the chart region in the Status Window and a dialog box will open. Type in the 16-digit unlock code in the space provided and click "Unlock". You will see the symbol in the Status Window change from a "lock" to "unlock" icon signifying that you have successfully unlocked the region. Click the "Transfer" icon or press "F8". The region will then be uploaded into the MAP 410 unit. (Note: Don't forget to also add Navaids for the region). Step 3 Step 4 Step 5 Step 6 Step 9 Step 10 Magellan MapSendTM User Guide 3 C M Y CM MY CY CMY K MapSendTM Chart Regions Unlock Instructions 1.) Chart Region Code: For selecting a C-MAP region code, please refer to pages 12 - 15 of the user guide. Then write the code number down in the space provided above for reference. 2.) MAP 410 Unit ID #: First connect your MAP 410 to your computer, then to obtain the MAP 410 unit ID number, enter the "Unit" menu and click on "Get MAP 410 ID" from the menu. Now write the ID number down in the space provided above for reference. 3.) CD-ROM Serial #: Note that the CD-ROM serial number is listed on the back of the jewel case. Be sure to write it down in the space provided above for reference. You will not be able to purchase unlock codes with out it, nor will you be able to obtain your first (1) free marine chart region unlock code. 4.) C-MAP Office Phone #: Please refer to page 27 of the user guide to locate the nearest C-MAP office. Then write the phone number down in the space provided above for reference. Be sure to call C-MAP in order to receive your first (1) free marine chart region unlock code and for any purchases of other unlock codes. 5.) Pricing: The first (1) marine chart region unlock code is free with purchase of the MapSendTM Marine CD-ROM only. Additional unlock codes will be charged accordingly: 1 Marine Chart Region Marine Chart Regions Superlakes Chart Regions FREE $75.00 $50.00 MapSendTM Marine MapSendTM Marine MapSendTM Land (USA) & MapSendTM Marine (Americas) (For More detailed Instructions please refer to page 3 of the user guide.) PN 203024 A GETTING STARTED MINIMUM PC REQUIREMENTS Listed below is what is needed to upload MapSendTM onto your PC: 1. Microsoft® Windows® 95 or 98. MapSend does not run under Windows NT. 2. 486, 66MHz or faster processor. 3. 16 MB RAM or more. 4. 15 MB hard disk space or higher. 5. Serial COMM port. 6. CD-ROM drive. 7. Mouse. 8. 256 color display. 9. Magellan PC interface cable (p/n: 00-19068-000) or PC interface cable with cigarette lighter adapter (p/n: 00-19067-000). INSTALLATION PROCEDURES Use the following procedures to install MapSend: 1. Start Windows®. Close all active programs. 2. Insert the MapSend CD into your CD-ROM drive. 3. Open the Start menu and click on Run. 4. Type D:\setup and click OK. If your CD-ROM drive is not D, type the appropriate letter in its place. 5. Follow the on-screen installation instructions. STARTING MAPSEND There are two ways to start the MapSend program: 1. Click on the Quick-Start shortcut icon located on your desktop. or 1. Click on the Start Button. 2. Select the Programs folder. 3. Select MapSend folder. 4 Magellan MapSendTM User Guide 4. Click the MapSend application to start and open the MapSend main window. USING HELP MapSend has a Help Menu that you can access by clicking on Help or by pressing (F1). Use the Help Index in the Help dialog box to get help on any of the topics listed. You can access any topic by clicking on it. If you want to return to the Index click on Back. You may print the topic by clicking on Print. MAPSEND MENU The MapSend menus contain MapSend functions and settings. Some of the functions can also be activated through the buttons on the Toolbar. The table below lists the menus and the items found within them. MENU ITEM File Print Print Setup Options Prints the map area as it appears in the active window (screen). Opens the Print Setup dialog box for printing options; paper size, paper source, orientation, etc. Opens the Options dialog box to choose and set the available options; Port&Source, Coverage Borders, Cities, Roads, POI. Closes MapSend. Programs/sends selected regions to your MAP 410 unit. This restores the program defaults that were present at time of purchase. Provides the MAP 410 Serial Number when the receiver is connected to the PC. Opens the regions allowing you to choose an area of interest to view. When the desired area is selected, it is automatically listed in the Status Window at the bottom of the MapSend main window. DESCRIPTION Exit Unit Send Selected regions Restore factory data Get MAP 410 ID Select Region Add Magellan MapSendTM User Guide 5 MENU ITEM Remove DESCRIPTION Removes the selected region in the Status Window at the bottom of the MapSend main window. Add/Remove: Adds or Removes an unlock code; Make Backup; Restore from Backup. Opens the NT Compact Info dialog box which lists the selected region chart contents by scale (if selected) or by name (if selected). Opens a demo area which contains NT Compact data with full features. Unlock Codes Info View NT Compact full features demo Session Show session window Help Contents How to Use Help About MapSend Brings up the Session dialog box and information. Opens the MapSend Help window. Windows Opens the About MapSend dialog box containing the version number and copyright information. MAPSEND OPTIONS To select the available options in MapSend, select "File/Options" from the menu bar as shown in the picture below: 6 Magellan MapSendTM User Guide After selecting "Options" from the menu bar, the following dialog box will appear: The Connection Port is the COM port where the MAP 410 is connected, the Source CD-ROM drive represents where the MapSend CD is inserted, and the electronic cartography colors and the depth units can be set. By selecting "Coverage Borders" the following dialog box will appear: In the "Coverage Borders" area, you can see what the scale level is currently set to and change it to the desired scale level. Automatic allows you to set the number of levels which are shown each time you zoom from the current scale. Magellan MapSendTM User Guide 7 Manual allows you to set which regional borders are shown. Levels A B C D E F G Scales >1,500,001:1 500,001 to 1,500,000:1 150,001 to 500,000:1 50,001 to 150,000:1 15,001 to 50,000:1 5,001 to 15,000:1 <5,000:1 If Automatic is selected and the levels are less than 4, the outline of the selected area may not be visible from the World Map view. By selecting the "Cities" thumbnail from the previous dialog box, the following dialog box appears: Scale levels at which cities can be seen are set from this dialog box. City Type Major Large Medium Small City Size >500,000 or state capital 100,000 to 500,000 20,000 to 100,000 <20,000 8 Magellan MapSendTM User Guide By selecting the "Roads" thumbnail, the following dialog box will appear: The above dialog box shows the scale levels at which the roads and the type of symbols used can be seen and set. By selecting the "POI" thumbnail, the following dialog box will appear: The above dialog box shows the scale levels at which POI's can be seen and set. Magellan MapSendTM User Guide 9 THE TOOLBAR The table below describes each button on the Toolbar. BUTTON DESCRIPTION Open NT Compact region*: Opens the NT Compact regions to choose an area of interest to view. When the desired area is selected it is automatically listed in the Status Window at the bottom of the MapSend main window. Print: Prints the map area as it appears in the active window (screen). World Wide background: Returns to the world map from any zoom level. Zoom Out. Zoom In. Info: Additional information on charts. Program/Send data to MAP 410 receiver: Programs/uploads the selected NT Compact region to MAP 410 receiver. THE STATUS WINDOW The Status Window appears at the bottom of the MapSend main window. It provides you with the information related to the region(s) selected: 1. Locked or Unlocked icon. 2. Code of the region. 3. Name of the region. 4. Size (Available memory/Used up memory) in % in MAP 410. 5. Date of the region. 10 Magellan MapSendTM User Guide 6. Cursor Position Lat/Lon. 7. Scale of map on main window/map currently viewed. 8. MAP 410 serial number. NAVIGATING THE MAP The MapSend main window displays a World-Background Map when the program is activated. Following are some tips on how to quickly move around the map: · To center (PAN) a specific area on the screen, click on the area with the left mouse button. · To see more details, press the "I" key or the "Zoom In" toolbar button. · To see less detail, press the "O" key or the "Zoom Out" toolbar button. · To return to the World-Background Map without zooming through the intermediate levels, click on the "Background" toolbar button. · Pressing the "F1" key accesses MapSend Help. · Pressing the "F2" key opens up the "Cartridge Info" dialog box containing information on the currently highlighted region. · Pressing the "F5" key opens up the "NT Compact Title" dialog box allowing you to choose a region to add. · Pressing the "F6" key removes the highlighted region. · Pressing the "F8" key sends the selected region(s) to your MAP 410. · Pressing the "F10" key highlights "File" on the Menu Bar. · Pressing the "F12" key opens up the "HP Doc Wise" dialog box allowing you to print the current screen. · Pressing the right mouse button while holding the "CTRL" key opens up the "Cartographic Info" dialog box allowing you to view details on the chosen object. Magellan MapSendTM User Guide 11 SELECTING (OPENING)/REMOVING A CMAP REGION PREVIEW MODE When you have accessed the Marine MapSend CD and are viewing the map you are in the Preview mode, allowing you to see an overview of the region that you are interested in unlocking. With this mode you will see depth contours, buoys, beacons, fish havens, fog signals, lighthouses and many more. NT COMPACT FULL FEATURES DEMO MODE With the NT Compact full features demo enabled, accessed under the "Select Region/View NT Compact full features demo" option on the menu bar, you will see even greater detail than when in Preview mode. This mode allows you to see a more complete view of what will be seen when the region is uploaded to your MAP 410. To disable this mode, click on the Status Window. SELECTING (OPENING) A REGION There are two ways to select (open) a region. You can select a region from the map or from a list. These are discussed in the following two sections. NAVAIDS are NOT part of the marine charts and must be added separately by selecting them from the "Select Type POI" menu. 12 Magellan MapSendTM User Guide SELECTING FROM THE MAP To select a region from the map, click the right mouse button on the region of the map you are interested in. The following dialog box will appear: Select the type of region you wish to open, either Marine, Superlake, POI or Roads. By selecting the code of a region, the coverage related will appear with a shaded background. The information related to that region will also appear on the left side of the dialog box. You can access additional information listing all charts related to that region by clicking on the "Info" button located at the bottom of the dialog box (Marine & Superlake only). Magellan MapSendTM User Guide 13 SELECTING FROM THE LIST You can also select a region using the MapSend menu by selecting "Select Region" and then select "Add" or press the following toolbar button: You will see the following screen: Select the desired region and click on the "Open" key. The selected regions are automatically added to the list in the status window at the bottom of the screen. By clicking the right mouse button on one of the listed regions, a pop-up menu appears indicating the available functions on that region. 14 Magellan MapSendTM User Guide The maximum number of regions which can be added is four. REMOVING A REGION Use the following procedure to Remove the listed region(s)from the Status Window. 1. 2. 3. Select region listed in the Staus Bar and press F6, or; Click region listed in the Status Window with the right-click on your mouse, select "Remove". or; Select "Select Region" from the MapSend menu, select "Remove". Magellan MapSendTM User Guide 15 UPLOADING REGIONS TO YOUR MAP 410 After connecting your MAP 410 to your PC, click the "Transfer" button to activate the upload procedure. This will upload the chosen regions to your receiver. The maximum number of regions which can be added is four. CONNECTING YOUR MAP 410 TO YOUR PC To connect your PC to your MAP 410, take the PC Interface Cable (p/n: 00-19068-000), or the PC Interface Cable with Cigarette Lighter Adapter (p/n: 00-19067-000), and connect one end into the COM Port on the back of your PC and the other end into the back of your receiver, pulling back the rubber tab to reveal the connector. Make sure the connections are snug. STARTING UPLOAD After having selected the desired region to upload to your MAP 410 and after having obtained Unlocking Codes, if the region requires one, the Upload procedure can take place. Select "Unit/Send selected regions" from the menu or click on the following: If the selected regions have their Unlocking Code, or are Free, the Upload window will appear. For more information on the types of regions available, see the upcoming section "Types of Regions". 16 Magellan MapSendTM User Guide Make sure your PC and MAP 410 are connected, using the PC Interface Cable, and click on "Start". This creates a file which contains all the selected regions. A progress bar shows the state of progress of the operation, the MAP 410's memory is cleared and the Upload process begins. A second progress bar, related to the approximate time remaining for Upload completion, is also shown. INTERRUPT UPLOAD You can interrupt the Upload procedure at any point during the Upload process by clicking on the "Cancel" button. If your MAP 410's memory is cleared, the World Background is displayed when the unit is turned ON. END UPLOAD If the Upload has been successful, the following message appears at the end of the Uploading procedure: Magellan MapSendTM User Guide 17 TYPES OF REGIONS There are two types of regions contained on your MapSend CD. They are Unlocked Areas (Free), meaning that no Unlocking code is required to Upload them into your MAP 410, or Locked Areas (Not Free), which need an unlock code to open. To obtain an Unlocking Code contact the nearest CMap office listed in the back of this guide. UNLOCKED REGIONS All Points of Interest (POI) and Road Areas do not require an Unlocking Code. LOCKED REGIONS All Marine and Superlake regions require an Unlocking Code. Contact C-MAP for a valid Unlock Code. INFORMATION ON REGIONS The list of all the charts contained in a Marine and/or in a Superlake Area is available by clicking on the "Info" button shown at right: After the region has been selected, opened and listed in the window at the bottom of the main MapSend window, 18 Magellan MapSendTM User Guide the following window will appear: To change the order of the charts, by name or by scale, select "Choice" in the dialog box. CHART OBJECTS INFORMATION Once a region is selected and opened it is possible to see the information related to the objects present in the cartography. To select this function, keep the "CTRL" key pressed and click on the object with the right mouse button. The following window will appear: Magellan MapSendTM User Guide 19 UNLOCKING CODE All the Marine and Superlake regions are categorized as Locked Areas and therefore require an Unlocking Code in order to upload them into your MAP 410. UNLOCKING CODE REQUEST To obtain an Unlocking Code you'll need to know the serial number of your MAP 410. This number can be retrieved by selecting: "Unit/Get MAP 410 ID" from the MapSend menu. Your MAP 410 serial number will be shown in the window. Contact the nearest C-MAP office, from the list in this guide, and submit your MapSend CD serial number for your Marine CD first unlock (free), or your credit card information for additional unlocks. Also, you will need to submit the serial number of your MAP 410 and the code number of the region you wish to unlock. INSERT AN UNLOCKING CODE The Unlocking Code must be inserted in MapSend in order to upload the selected region into your MAP 410. Open and select the region from the list at the bottom of the main MapSend window, select "Select region/Unlocking codes/Add/Remove"; the following window will appear: 20 Magellan MapSendTM User Guide Insert the Unlocking Code, received from the C-MAP Office, and click on "Unlock". If the code has been correctly entered the Lock icon will change to unlocked next to the selected region. The region is now unlocked and can be uploaded to your MAP 410. UNLOCKING CODES BACKUP MapSend saves all of the Unlocking Codes on the hard disk, however it is a good idea to save the Unlocking Codes on a floppy disk as backup. Select "Select region/Unlocking codes""Make backup" and save the Unlocking Codes on a floppy disk. RESTORE UNLOCKING CODES FROM BACKUP To restore the Unlocking Codes from a backup copy, select "Select region/Unlocking codes" and then select "Restore from backup". PRINT UNLOCKING CODE LIST The full list of the obtained Unlocking Codes can be printed by selecting "Select region/Unlocking codes/Print all" from the menu.Points of Interest (POI) & Roads Magellan MapSendTM User Guide 21 POINTS OF INTEREST (POI) Below is a list of categories of POI's available in the MapSend CD: POINTS OF INTEREST Aviation & Aerial Large Airports Small Airports Exit Ramp Services ATM's Auto Repair & Services Gas Stations Highway Exit Ramps Hotels & Lodges Medical Facilities Parks - Exit Ramps Restaurants RV Campgrounds & Services Truck Services Marine Activities Boats & Canoes Dive & Snorkeling Marinas & Harbors NAVAIDS Fixed NavAids Floating NavAids - Buoys Lighthouses 22 Magellan MapSendTM User Guide Wrecks & Obstructions Wrecks & Obstructions Campgrounds Campgrounds Outdoor Activities Firearms & Archery Aerial Activities Golf Courses Hunting & Fishing Tourist & Leisure Resorts & Casinos Wineries Museums & Historical Gardens Zoos & Aquariums Sports Arenas Tourist Attractions Sight Seeing Parks & Recreation Recreation & Amusement Parks Parks ROADS With your MapSend Land CD-ROM you have access to an enhanced network of roads as well as more lakes, rivers and streams. Magellan MapSendTM User Guide 23 SESSIONS The Session Mode allows for the transfer/upload of regions from more than one CD (e.g. Land and Marine) to your MAP 410. Starting a session brings up the following dialog box: In the "Current Selected Region" column all currently opened regions with an unlocking code or Free are shown. In the "In Session" column all regions already added to the session are listed. ADDING A REGION TO SESSION To add a region to Session, select the region from the "Current Selected Region" and click on "Add". The "Add All" adds all the regions listed in the column to "In Session". NAVAIDS are NOT part of the marine charts and must be added separately by selecting the type from the "Select Type" menu. Once you have added all of the regions from the first CD-ROM, close the MapSend program. Insert the next CD-ROM and restart MapSend. Add addional regions as necessary and click "Transfer" to add them to your Session. 24 Magellan MapSendTM User Guide REMOVING REGIONS FROM SESSION To remove a region from the session, select a region in the "In Session" column and click on Remove. The "Remove All" removes all the regions present in Session. PREVIEW The "View" button allows you to have a preview of all the regions in Session. By selecting it, all regions present in Session are shown. In this mode no Add or Chart Info functions are available. To return to the previous Session window click on message at the bottom of the screen. Magellan MapSendTM User Guide 25 TROUBLESHOOTING Following are some questions, and answers, you may have while working with MapSend. I have MapSend installed, but it will not work without the CDROM inserted. Why? · To conserve hard disk space, MapSend only installs the files necessary to run the program. All of the data files are on the CDROM, and therefore it is necessary to have the CD present to run MapSend. I have added a region, but I don't see where it is? · Be sure that `Border Coverage' in `File/Options' is set to either Manual, with All levels selected, (the default setting) or to Auto with at least 5 levels showing. I opened a Marine chart region and tried to upload it onto my MAP 410, but I received a message that I need an unlock code. What does this mean? · In the front of this manual is a guide for how to obtain an unlock code. With the purchase of a Marine CD, you will receive one free unlock region. Subsequent unlocks are also received from the same source for an additional fee. I tried to upload region(s) to my MAP 410, but MapSend said that the unit is not connected. What is the problem? · Make certain that the connector cable is firmly connected to both the serial port and the MAP 410 unit. · Enter the `Unit' menu and `Get MAP 410 ID'. If this works, try the upload again. · Try changing the COM port in `File/Options'. Repeat Step 2. · Be certain that other programs that utilize the COM port are not active (such as handheld docking programs) as these programs tend to "attach" themselves to COM ports. · If you are still unable to access the MAP 410, contact your hardware vendor to ensure that the COM ports are properly registered and accessible. 26 Magellan MapSendTM User Guide CONTACTING C-MAP & MAGELLAN C-MAP Contact the following C-MAP offices for NT Compact unlock codes: C-MAP USA Off. Hrs are 08:30 AM to 6:00 PM EST Mon/Fri Phone (800) 424 2627 or (508) 477 8010 Fax (508) 477 6168 E-Mail c-mapinfo@c-map.com C-MAP Italy Off. Hrs are 09:00 to 13:00 / 15:00 to 19:00 Mon/Fri Phone +39 (0585) 772 400 or 772 444 Fax +39 (0585) 631282 E-Mail info@c-map.it C-MAP UK Off. Hrs are 09:00 to 17:00 Mon/Fri Phone +44 (1329) 517 777 Fax +44 (1329) 517 778 E-Mail sales@c-map.co.uk C-MAP Norway Off. Hrs are 08:00 to 16:00 Mon/Fri Phone +47 (51) 464 700 Fax +47 (51) 464 701 E-Mail market@c-map.no C-MAP Australia Off. Hrs are 09:00 to 17:00 Australia EST Mon/Fri Phone +61 (2 ) 987 90277 Fax +61 (2) 987 90322 E-Mail c-mapinfo@c-map.com.au C-MAP France Off. Hrs are 08:00 to 12:00 / 13:30 to 18:00 Mon/Fri Phone +33 (298) 521 215 Fax +33 (298) 521 419 E-Mail c-map.wanadoo.fr Magellan MapSendTM User Guide 27 MAGELLAN For any operational problem with your MAP 410 please contact Magellan's Technical Service at (800) 707-9971 or (909) 394 5000 or via e-mail at: support@mgln.com. Representatives are available Monday through Friday from 7 AM to 5 PM Pacific Standard Time. The Customer Service fax number is (909) 394 7070. 28 Magellan MapSendTM User Guide 960 Overland Court, San Dimas, CA 91773 (909)394-5000 630750 A