User manual SONY ERICSSON K608I - MODEM FUNTIONALITY

G s Modem functionality Mobile connectivity etting tarted June 2005 Getting started Modem functionality Contents Introduction ............................................................................................... 3 Before you start ......................................................................................... 3 System requirements ............................................................................. 4 How to use your phone as a modem ..................................................... 4 Overview of instructions ........................................................................ 4 Installing Mobile Networking Wizard ......................................................... 5 Install from the CD ................................................................................. 5 Download from the Web and install ....................................................... 5 Setting up the USB cable modem ............................................................. 6 Installing the USB cable drivers ............................................................. 6 Setting up the USB phone modem in the computer ............................. 7 Setting up the infrared modem .................................................................. 7 Setting up the BluetoothTM modem ........................................................... 8 Creating a dial-up connection to your Internet service provider ............. 10 Troubleshooting ....................................................................................... 11 Troubleshooting when having used another phone as modem ........... 11 Troubleshooting the infrared modem .................................................. 11 Troubleshooting the Bluetooth modem ............................................... 12 2 June 2005 Getting started Modem functionality Introduction Instruction symbols The following instruction symbols may appear in this Getting started guide: Note Indicates that a service or function is network- or subscriptiondependent. Contact your network operator for details. % See also page ... Use the selection keys or the navigation key to scroll and select. Press the navigation key centre. Press the navigation key up. Press the navigation key down. Press the navigation key to the left. Press the navigation key to the right. } Your phone has a built-in modem. You can use it to connect a computer to your Internet Service Provider (ISP) to browse the Internet or manage your email messages. Before you start The instructions in this document focus on how to set up a computer running Windows® ME, Microsoft® Windows 2000, Windows XP Home and Windows XP Pro using a GPRS connection to access the Internet. Before you set up your computer and start using the modem, make sure you have the following: · 3G (UMTS) or GSM phone subscription that supports GPRS or High Speed Data. · Phone subscription that covers Internet browsing. If you are not sure whether you have this, please contact your network operator. · Data account (WAP configuration) set up in your phone. See your phone User guide and your 3G (UMTS) or GSM operator's subscription information for details. You can also use the Phone setup on www.SonyEricsson.com/support to have all necessary WAP settings sent to your phone in a text message (SMS). 3 June 2005 Getting started Modem functionality System requirements The Sony Ericsson Mobile Networking Wizard software for your phone series is designed to work with Windows® ME, Windows 2000 (SP3 or higher), Windows XP Home and Windows XP Pro. The general system requirements are: At least 120 MB free hard disk space. Internet Explorer 5.0 or later has to be installed. · Windows ME: 64 MB RAM, 200 MHz · Windows 2000 with SP3: 64 MB RAM, 266 MHz · Windows XP Home and Windows XP Pro: 128 MB RAM, 300 MHz How to use your phone as a modem You are now prepared to set up your phone as a modem in just 3 simple steps! Overview of instructions Install the Mobile Networking Wizard · Use the CD that comes with the phone, % 5 Install from the CD. - or · Download from the Web, % 5 Download from the Web and install. Set up the modem Create a connection to your Internet service provider · Use a USB cable, % 6 Setting % 10 Creating a dial-up up the USB cable modem. connection to your Internet service provider. - or · Use Infrared, % 8 Setting up the infrared modem. - or · Use Bluetooth, % 9 Setting up the BluetoothTM modem. 4 June 2005 Getting started Modem functionality Installing Mobile Networking Wizard The Sony Ericsson Mobile Networking Wizard software provides the necessary assistance to create dial-up networking connections on your computer. The Mobile Networking Wizard software is included in the PC Suite that you find on the CD that comes with your phone. You can also downloaded the PC Suite from www.SonyEricsson.com/support. The software can be installed on a computer running Windows® ME, Windows 2000 (SP3 or higher), Windows XP Home and Windows XP Pro. Install from the CD To install the Mobile Networking Wizard software from the CD 1. Insert the CD that came with the phone. The CD should start automatically. 2. Select language and click OK. 3. Click Install PC Suite now and follow the instructions on the screen. - or - Download from the Web and install To download the PC Suite and get the latest version of the Mobile Networking Wizard 1. In your Internet browser, go to www.SonyEricsson.com/support. 2. Select a region and country or "Global support area". 3. Enter the product name: phone model. 4. Select Software downloads/PC Suite and follow the Mobile Networking Wizard download instructions. To install the Mobile Networking Wizard software 1. Double-click on the downloaded PC Suite file. 2. If the installation does not start automatically, click Start/Run.../Browse and select the Start program (PC Suite_version.exe). Click OK to start the program. 3. Now the files you need will be extracted. Click Next. 4. When the installation has started, select the language you prefer, and click OK. 5. Click Next and follow the instructions in the wizard. When asked to select a Setup type: · select Custom and then Mobile Networking Wizard if you want to install only the Mobile Networking Wizard software. · select Complete if you want to install all the software features that are included in the PC Suite. 6. When the installation is complete the Sony Ericsson Mobile Networking Wizard icon appears on your desktop. The first time you start Mobile Networking Wizard, the Mobile Phone Monitor phone connection wizard starts to identify the phone model and capabilities. Enter information, click on "Next" and "Finish". 5 June 2005 Getting started Modem functionality Setting up the USB cable modem The Sony Ericsson USB cable that comes with the phone can be used to connect a computer to your phone and use the phone as a modem. When setting up the USB cable modem, you first have to install the USB drivers, and then set up the USB phone modem in the computer. Installing the USB cable drivers For the first step in the setup procedure, installing the cable, you need access to the software driver for the cable. The software drivers can be installed from the Sony Ericsson CD that came with your phone. You can also download the latest version of the driver from www.SonyEricsson.com/support. Install the USB cable drivers from the CD To install the USB cable drivers when you have the CD 1. Insert the CD that came with your phone. If the PC Suite installation window opens, simply close it as it is not needed here. 2. Connect the USB cable to a USB port on the computer and to the phone. 3. The "Found New Hardware Wizards" starts. Click Install the software automatically and click Next. 4. The wizard should find the software drivers automatically. Click Finish. 5. Repeat steps 3 and 4 until all drivers are installed (typically four times). 6. To verify that the USB cable modems have been installed, click Start/Settings/Control Panel, and double-click the Phone and Modem Options icon. 7. Select the Modems tab. Check that the modems "Sony Ericsson (phone model) USB WMC Data Modem" and "Sony Ericsson (phone model) USB WMC Modem" are in the list. - or - Download and install the USB cable drivers from the Web To download the software driver for your cable 1. In your Internet browser, go to www.SonyEricsson.com/support. 2. Select a region and country or "Global support area". 3. Enter the product name: Product name. Select Software downloads/Drivers and scripts and follow the download instructions on the page. 4. Use the Windows Explorer to locate the downloaded file and extract its contents. Make a note of the location of the extracted files. To install the software drivers for your USB cable when you have downloaded the driver 1. Make sure you have downloaded the drivers from www.SonyEricsson.com/support as described in "To download the software driver for your cable" on page 6. 2. Connect the USB cable to a USB port on the computer and to the phone. 3. The "Found New Hardware Wizards" starts. Select the option Install from a list or specific location and click Next. 6 June 2005 Getting started Modem functionality 4. Click Browse... · To install the driver that you downloaded, browse to the directory where you extracted the downloaded file, click OK. 5. Click Finish in the final wizard window. 6. Repeat steps 3 to 5 until all drivers are installed (typically four times). 7. To verify that the USB cable modems have been installed, click Start/Settings/Control Panel, and double-click the Phone and Modem Options icon. 8. Select the Modems tab. Check that the modems "Sony Ericsson (phone model) USB WMC Data Modem" and "Sony Ericsson (phone model) USB WMC Modem" are in the list. Setting up the USB phone modem in the computer To set up the USB phone modem in the computer 1. Connect the USB cable to the phone. 2. Click Start/Settings/Control Panel, and double-click the Phone and Modem Options icon. 3. Select the Modems tab. · If the "Sony Ericsson (phone model) USB WMC Data Modem" and/or "Sony Ericsson (phone model) USB WMC Modem" are in the list of modems, proceed to step 8. · If a USB modem other than the "Sony Ericsson (phone model) USB WMC Data Modem" or "Sony Ericsson (phone model) USB WMC Modem" is in the list, the modem driver should be updated. Select the modem in the list, click Properties, select the Driver tab, and click Update Driver.... In the first dialog, select the option Install from a list or specific location. · If no USB modem is installed, click Add. The "Add Hardware Wizard" starts. In the first dialog, select the option Don't detect my modem. I will select it from a list. Proceed to step 5. 4. Select the option Don't search. I will choose the driver to install and click Next. 5. First select Sony Ericsson Mobile Communications in the Manufacturers list, then select Sony Ericsson (phone model) USB WMC Data Modem or Sony Ericsson (phone model) USB WMC Modem in the Models list, and click Next. 6. In the "Add Hardware Wizard", select the COM port for the USB cable. 7. The modem driver is installed. Click Finish in the final wizard window. 8. Select the Sony Ericsson (phone model) USB WMC Data Modem or Sony Ericsson (phone model) USB WMC Modem and click Properties. 9. Select the Modem tab and check that Maximum port speed is set to 115200. 10. Select the Diagnostics tab and click Query modem. In the lower list, the queries sent to the modem in the phone and the responses returned from the modem are displayed. If an error message is displayed, such as "The modem failed to respond...", exit all dialogs and the Control Panel. For further instructions, % 11 Troubleshooting. 11. To finish the Internet setup, % 10 Creating a dial-up connection to your Internet service provider. 7 June 2005 Getting started Modem functionality Setting up the infrared modem You can connect your phone to a computer using Infrared if your phone has Infrared capabilities. When the phone and a computer running Windows® ME, Windows 2000 (SP3 or higher), Windows XP Home and Windows XP Pro are first connected via infrared, a generic modem driver is automatically installed. You will only need to check the modem properties and install the Sony Ericsson modem driver. The infrared device in the computer must be installed (see the manufacturer's product documentation) and working properly before you start the installation procedures below. The procedures, terms, application names, and so on, may be slightly different depending on the brand and model of the infrared device in the computer. In such cases, refer to the manufacturer's product documentation. To set up infrared 1. Computer: If you have previously used another phone as a modem in the computer, remove its driver from Windows before you continue. To remove an installed modem driver, click Start/Settings/Control Panel, double-click the Phone and Modem Options icon, and select the Modems tab. Select the modem to remove in the list, click Remove, and follow the instructions on the screen. 2. Phone: to turn on the infrared port in your phone, } Settings } the Connectivity tab } Infrared port } On. The Infrared icon appears on the phone's screen. 3. Place the phone in front of the computer's infrared port. The distance should be less than 20 cm and the angle less than 30 degrees. 4. Wait for the phone and computer to connect. This can take a short while. When connected, the infrared icon appears in the taskbar (near the clock, at the bottom of the computer screen). 5. Computer: click Start/Settings/Control Panel, double-click the Phone and Modem Options icon, and select the Modems tab. If Sony Ericsson (phone model) IrDA modem is in the list of modems, proceed to step 12. 6. Normally a Standard modem over IR link has been automatically installed. Select it in the list and click Properties. Select a Standard modem over IR link which is attached to a COM port. If no infrared modem has been installed, exit the Control Panel, restart the computer and start this setup sequence from the beginning. 7. Select the Driver tab and click Update Driver.... The "Hardware Update Wizard" starts. 8. Select the option Install from a list or specific location and click Next. 9. Select the option Don't search. I will choose the driver to install and click Next. 10. Select the Show compatible hardware box and Sony Ericsson (phone model) IrDA modem in the Models list and click Next. 11. The modem driver is updated. Click Finish. Click Close to exit the Properties dialog box. 12. Select Sony Ericsson (phone model) IrDA modem in the list and click Properties. 13. Select the Modem tab and check that Maximum Port Speed is set to 115200. 14. Select the Diagnostics tab and click Query Modem. In the lower list, the queries sent to the modem in the phone and the responses returned from the modem are displayed. If an error message is displayed, such as "The modem failed to respond...", exit all dialogs and the Control Panel. For further instructions, % 11 Troubleshooting. 15. To finish the Internet setup, % 10 Creating a dial-up connection to your Internet service provider. 8 June 2005 Getting started Modem functionality Setting up the BluetoothTM modem You can connect your phone to a computer using BluetoothTM wireless technology if your phone has Bluetooth capabilities. You first need to add your computer to your phone's list of Bluetooth devices. This procedure may be called pairing or bonding in other product documentation. The Bluetooth device in the computer must be installed (see the manufacturer's product documentation) and working properly before you start the installation procedures below. When the computer is added to the list of Bluetooth devices in the phone, the computer and phone automatically connect when they are within about 10 m range from each other and the phone's Bluetooth function is turned on. The procedures, terms, application names, and so on, may be slightly different depending on the brand and model of the Bluetooth device in the computer. In such cases, refer to the manufacturer's product documentation. To connect your phone to a computer via Bluetooth 1. Phone: } Settings } the Connectivity tab } Bluetooth } Phone name. Enter a name that identifies your phone uniquely to other Bluetooth devices. 2. } Settings } the Connectivity tab } Bluetooth } Visibility } Show phone. 3. } Settings } the Connectivity tab } Bluetooth } Turn on. The Bluetooth icon is shown on the phone's screen. 4. Computer: Open the Bluetooth software and search for Bluetooth devices. One icon appears for each Bluetooth device found. 5. Right-click the icon with your phone's name. In the menu that pops up, select the menu item for pairing/bonding. 6. In the dialog you enter a code of your choice, which will be the "password" for the computer to get access to the Bluetooth services in the phone. If the dialog does not ask for a code, enter 0000. Click OK. A dialog appears in your phone after a few seconds. This may occur differently for different brands and models of Bluetooth devices. Refer to the manufacturer's product documentation for details. 7. Phone: In a dialog you are asked if you want to add the computer to "My devices". } Yes. 8. Enter the code you entered in step 6 above and } OK. If the dialog in step 6 above did not ask for a code, enter 0000. 9. Computer: The phone icon should now be marked, for example with a check mark in a check box, to show that the phone now can be automatically recognized when Bluetooth is turned on and the phone and the computer are within range from each other. To set up the Bluetooth phone modem in the computer 1. Computer: Click Start/Settings/Control Panel and double-click the System icon. 2. Select the Hardware tab and click Device Manager. 3. The Bluetooth modem can be found under Ports. Make a note of the Bluetooth COM port number (shown within parenthesis). 4. Exit to the Control Panel window. Double-click the Phone and Modem Options icon. 5. Select the Modems tab. · If the Sony Ericsson (phone model) Bluetooth Modem is in the list of modems, proceed to step 6. · If a Bluetooth modem other than the "Sony Ericsson Product name Bluetooth modem" is in the list, the modem driver should be updated. Select the modem in the list, click Properties, select the Driver tab, and click Update Driver.... In the first dialog, select the option Install from a list or specific location. Select the option Don't search. I will choose the driver to install. First select Sony Ericsson Mobile Communications in the Manufacturers list, then Sony Ericsson (phone model) Bluetooth 9 June 2005 Getting started Modem functionality 6. 7. 8. 9. Modem in the Models list, and click Next. In the "Add Hardware Wizard", select the COM port for the Bluetooth connection (a port with a number greater than 2). The modem driver is installed. Click Finish in the final wizard window, proceed to step 6. · If no Bluetooth modem is installed, click Add. The "Add Hardware Wizard" starts. In the first dialog, select the option Don't detect my modem. I will select it from a list. First select Sony Ericsson Mobile Communications in the Manufacturers list, then Sony Ericsson (phone model) Bluetooth Modem in the Models list, and click Next. In the "Add Hardware Wizard", select the COM port for the Bluetooth connection (a port with a number greater than 2). The modem driver is installed. Click Finish in the final wizard window, proceed to step 6. Select the Sony Ericsson (phone model) Bluetooth Modem, and click Properties. Select the Modem tab and check that Maximum Port Speed is set to 115200. Select the Diagnostics tab and click Query Modem. In the lower list, the queries sent to the modem in the phone and the responses returned from the modem are displayed. If an error message is displayed, such as "The modem failed to respond...", exit all dialogs and the Control Panel. For further instructions, % 11 Troubleshooting. To finish the Internet setup, % 10 Creating a dial-up connection to your Internet service provider. To use dial-up networking via Bluetooth wireless technology, Bluetooth has to be turned on in the phone. } Settings } the Connectivity tab } Bluetooth } Turn on. Creating a dial-up connection to your Internet service provider You have to create a new dial-up connection and configure it, to be able to connect to the Internet via 3G (UMTS) or GPRS. The procedure is the same irrespective of if you have a 3G (UMTS) or GPRS connection. First make sure you have the correct Internet settings in the phone. If you can't access the Internet from the phone, contact your Service Provider or use the Phone Setup on www.SonyEricsson.com/support to get the required WAP settings. To create a new 3G (UMTS)/GPRS dial-up connection 1. Click Start/Programs/Sony Ericsson/Mobile Networking Wizard. 2. The phone connection wizard opens and searches for your phone. This can take a short while. You are asked to enter a name for your phone (default My phone model) and for your SIM card (default My SIM). You should enter names that clearly identify your phone and SIM card, especially if you intend to use different phones or different accounts for Internet connections. If more phones are connected, wait until the wizard has finished searching. 3. Click on the button next to GPRS / UMTS packet data. 4. A list shows the different types of modems supported by your phone. It can take a few seconds to update the list. Select the modem you have installed and want to use for the connection, and click Next. 5. Enter a name for the connection. The name should clearly identify the connection if you intend to set up more than one in the computer. Click Next. 6. Select the option "Use settings from an existing entry in your phone", and select an account from the dropdown list. Click the "..." button if you want the wizard to refresh the account information from the phone. Click Next. 7. In the following two screens, enter DNS information, User name, Password and Domain name according to information from your service provider. If you do not know the settings, leave them blank. 8. The final window in the setup wizard shows your settings. Click Finish to test the created connection. 9. Select the icon of the created connection and click Connect. 10. Click Dial. 10 June 2005 Getting started Modem functionality 11. If the connection succeeds, a network icon appears in the taskbar. Right-click the icon to see the status of the connection or disconnect. If the connection did not succeed, go back to step 6 above and check that you selected the correct account and repeat steps 7 to 10. 12. Finally, you should set up your Internet browser to use the created connection. Refer to your browser's documentation. Normally, you should set up your browser only to dial-up the 3G (UMTS)/GPRS connection if no other connection is available, and disconnect automatically when closing the browser. Troubleshooting The troubleshooting guides below refer to problems arising during setup procedures, but can also be useful for solving problems occurring after a successful installation. Most often problems using the phone as a modem relate to one of the following issues: · The computer and the phone do not connect properly. Find the solution to this kind of problem in the section for the connection type that you use, see % 12 Troubleshooting the infrared modem, and % 14 To set the COM port speed. · The phone modem is properly connected but does not respond to commands. Some solutions can be found in % 11 Troubleshooting when having used another phone as modem, others in the sections for the different connection types. Troubleshooting when having used another phone as modem Here you find some general actions to take if you are having trouble with the modem setup or 3G (UMTS)/GPRS connections. If you have previously used another phone as a modem: · Remove all software installed in the computer for communication between the computer and the other phone. For example many Sony Ericsson phones use the XTNDConnect software (Sony Ericsson Communication Suite), which should be removed before installing the Mobile Networking Wizard software for your phone. Do not remove software used for infrared devices, if they work properly. Restart the computer after removing the software. · Install (or reinstall) the Mobile Networking Wizard software for your phone before you start the installation of your phone as a modem. · Remove phones and SIM cards that are not used in the "Phone Monitor Options". 11 June 2005 Getting started Modem functionality Troubleshooting the infrared modem If you have problems installing or using the infrared modem, this section gives you some hints on how to correct the problems. · The first action to take if the computer fails to connect to your 3G (UMTS)/GPRS network via the infrared modem is to check the connection between the computer and the modem and if the modem is responding. % 12 To check the infrared connection and modem. · In some computers, the COM ports are designed for higher connection speeds than the modem is, which can cause connection problems. To avoid problems, the COM port speed should not be higher than 115200 bps. % 12 To set the COM port speed. To check the infrared connection and modem 1. Check that the infrared port is turned on in the phone and that the phone is aligned with the computer's infrared port. You should see one icon on the phone's screen and one in the computer's taskbar. 2. Computer: Open Phone and Modem Options/Modems in the Control Panel. Check that the "Sony Ericsson (phone model) IrDA Modem" is installed and attached to a COM port. · If the modem is not installed or installed but marked "Not present", restart the computer. Keep the phone aligned with the computer's infrared port and do not turn off the phone's infrared port. · If an infrared modem other than the "Sony Ericsson (phone model) IrDA Modem" is in the list and attached to a COM port, you should update the driver for the modem. % 12 To update the modem driver. 3. Select the modem in the list, click Properties and select the Diagnostics tab. 4. Click Query Modem. In the lower list, the queries sent to the modem in the phone and the responses returned from the modem should be displayed. To update the modem driver 1. In Control Panel/Phone and Modem options/Modems, select the modem you want to update, click Click Update Driver.... The "Hardware Update Wizard" starts. 2. Select the option Install from a list or specific location and click Next. 3. Select the option Don't search. I will choose the driver to install and click Next. 4. Select Sony Ericsson Mobile Communications in the Manufacturers list and Sony Ericsson (phone model) IrDA modem in the Models list and click Next. 5. The modem driver is updated. Click Finish. To reserve a COM port for the infrared modem 1. Find which COM port is used for the infrared modem in Control Panel/Phone and Modem Options/ Modems and make a note of the port number. 2. Open the Control Panel/Phone Monitor Options and select the COM Ports tab. 3. Select the COM port you found in step 1 above and click Reserve. If you have Windows XP, Service pack 1 or later or Windows 2000, Service pack 3 or later, the COM port is set to "Disabled". Don't try to change this setting! These Windows Service packs use a special driver (IRCOMM) for infrared communication, and enabling the COM port will disable this driver. To set the COM port speed 1. Open the Control Panel/Phone and Modem Options/Modems, select the Sony Ericsson (phone model) IrDA Modem and click Properties. 2. Select the Modem tab and set the Maximum Port Speed to no higher than 115200 in the drop-down list. 12 June 2005 Getting started Modem functionality Troubleshooting the Bluetooth modem If you have problems installing or using the Bluetooth modem, this section gives you some hints on how to correct the problems. · If the pairing/bonding fails during installation, % 13 To solve pairing/bonding problems. · If you have problems installing the modem after a successful pairing/bonding, % 13 To solve Bluetooth modem installation problems. · The first action to take if the computer fails to connect to your 3G (UMTS)/GPRS network via the Bluetooth modem is to check the connection between the computer and the modem and if the modem is responding. % 13 To check the Bluetooth connection and modem. · In some computers, the COM ports are designed for higher connection speeds than the modem is, which can cause connection problems. To avoid problems, the COM port speed should not be higher than 115200 bps. % 14 To set the COM port speed. To solve pairing/bonding problems 1. During the pairing/bonding procedure, place the phone as close as possible (less than 1 m) to the computer's Bluetooth device. 2. Phone: Make sure that Bluetooth is turned on and set to "visible". } Settings } the Connectivity tab } Bluetooth } Turn on and } Settings } the Connectivity tab } Bluetooth } Visibility } Show phone. 3. Follow the instructions on page 9 carefully to complete the pairing/bonding procedure. To solve Bluetooth modem installation problems 1. In some Bluetooth PC installations, you must activate a COM port manually. This is done differently for different brands and models of Bluetooth devices. Refer to the manufacturer's product documentation for details. In many cases you can right-click your phone's icon in the window where all found Bluetooth devices are shown, and select a "COM port activation" item in the popup menu. Make a note of the COM port number of the activated port. 2. In Control Panel/Phone Monitor Options/Com Ports, enable the COM port you activated in step 1. 3. Keep Bluetooth turned on in your phone and restart the computer. The phone modem should now be automatically installed. Follow the instructions: % 9 To set up the Bluetooth phone modem in the computer carefully to complete the modem installation. To check the Bluetooth connection and modem 1. Check that Bluetooth is turned on in the phone. You should see one icon on the phone's screen and the Bluetooth icon in the PC's taskbar should show that the connection is active (see your Bluetooth device manufacturer's product documentation for details). 2. Computer: Open the Control Panel/Phone and Modem Options/Modems. Check that the "Sony Ericsson (phone model) Bluetooth Modem" is installed and attached to a COM port. · If the modem is not installed or installed but marked "Not present", restart the computer. Keep the phone's Bluetooth turned on during the restart. · If a Bluetooth modem other than the "Sony Ericsson (phone model) Bluetooth Modem" is in the list and attached to the COM port assigned for your phone's modem, you should update the driver for the modem. % 13 To update the modem driver 3. Select the modem in the list and click Properties/Diagnostics. 4. Click Query Modem. In the lower list, the queries sent to the modem in the phone and the responses returned from the modem should be displayed. To update the modem driver 1. In the Control Panel/Phone and Modem options/Modems, select the modem you want to update, click Properties and select the Driver tab. 2. Click Update Driver.... The "Hardware Update Wizard" starts. 3. Select the option Install from a list or specific location and click Next. 4. Select the option Don't search. I will choose the driver to install and click Next. 13 June 2005 Getting started Modem functionality 5. Select Sony Ericsson Mobile Communications in the Manufacturers list and Sony Ericsson (phone model) Bluetooth Modem in the Models list and click Next. 6. The modem driver is updated. Click Finish. To set the COM port speed 1. Open the Control Panel/Phone and Modem Options/Modems, select the Sony Ericsson (phone model) Bluetooth Modem and click Properties. 2. Select the Modem tab and set the Maximum Port Speed to no higher than 115200 in the drop-down list. This Getting Started guide is published by: Sony Ericsson Mobile Communications AB, SE-221 88 Lund, Sweden Phone: +46 46 19 40 00 Fax: +46 46 19 41 00 www.SonyEricsson.com © Sony Ericsson Mobile Communications AB, 2005. All rights reserved. You are hereby granted a license to download and/or print a copy of this document. Any rights not expressly granted herein are reserved. First edition (June 2005) Publication number: EN/LZT 108 7989 R1A This document is published by Sony Ericsson Mobile Communications AB, without any warranty*. Improvements and changes to this text necessitated by typographical errors, inaccuracies of current information or improvements to programs and/or equipment, may be made by Sony Ericsson Mobile Communications AB at any time and without notice. Such changes will, however, be incorporated into new editions of this document. Printed versions are to be regarded as temporary reference copies only. *All implied warranties, including without limitation the implied warranties of merchantability or fitness for a particular purpose, are excluded. In no event shall Sony Ericsson or its licensors be liable for incidental or consequential damages of any nature, including but not limited to lost profits or commercial loss, arising out of the use of the information in this document. 14 June 2005