EDIROL PR Series Multi-screen Setup This walkthrough describes the setup process to create a 2 or 3 screen configuration with the EDIROL PR-50, PR-80 or DV-7PR. Required equipment: 1 1 1 1 Presenter (PR-50 or PR-80) as the Master. or 2 Presenters as Slaves. UM-2EX MIDI Interface for Master Presenter. UM-1EX series MIDI Interface for each Slave (All UM's must be switched to "Advanced = ON") Instructions for 2 and 3 screen setups: 1. Using an EDIROL UM-2EX, connect the MIDI out of the Master Presenter device to the MIDI in of the slave Presenter(s) (connected via an EDIROL UM-1EX.) 2. Turn on each slave Presenter device and proceed to the Presenter application. Click "Open Preferences" and "MIDI Preferences". 3. In the "PR Control" section of the slave PR, ensure the PR Control checkbox is NOT checked, and press OK. 4. Turn on the Master Presenter Device and in the MIDI preferences ensure the PR control is checked and is set to "Broadcast". Application Example (3 Screen) Multi-screen (DV-7PR, PR-50, PR-80) setup as Master and Slaves 425 SEQUOIA DRIVE, SUITE 114 BELLINGHAM, WA 98226 EDIROL.COM TOLL FREE: 800.380.2580 · FAX: 800.634.8202 EDIROL PR Series Multi-screen Setup This walkthrough describes the setup process to create a multi-screen configuration with the EDIROL PR-50, PR-80 or DV-7PR. Required equipment: 1 3 1 1 Presenter (PR-50 or PR-80) as the Master. or more Presenters as Slaves. UM-550 or UM-880 UM-1EX series MIDI Interface for each Slave (All UM's must be switched to "Advanced = ON") Instructions for setting up 4 or more screens: 1. Connect the MIDI OUT of the Master Presenter's UM-1EX to MIDI IN 2 on the UM-550/880. 2. Connect the MIDI IN of each Slave Presenter's UM-1EX to MIDI OUT 3,4, etc on the UM550/880. 3. Use the Patch button on the UM-550/UM-880 to patch the Master Input to the Slave Outputs. Example: Press: Patch > Input 2 > Output 3 > Output 4> Output 5, etc (depending on how many slaves you have. 4. Turn on each slave Presenter device and proceed to the Presenter application. Click "Open Preferences", then "MIDI Preferences". Make sure the PR Control checkbox is NOT selected. 5. Turn on the Master Presenter Device and in the MIDI preferences ensure the PR control is checked and it is set to "Broadcast". Application Example (4 Screen) Multi-screen (DV-7PR, PR-50, PR-80) setup as Master and Slaves 425 SEQUOIA DRIVE, SUITE 114 BELLINGHAM, WA 98226 EDIROL.COM TOLL FREE: 800.380.2580 · FAX: 800.634.8202 ...