Detailed instructions for use are in the User's Guide.
8" LCD Overhead Monitor with DVD Player
U S E R M A N UA L
DELPHI MOBILE VIDEO DVDM-800
Important: This manual contains important safety and operating information. Please read and follow the instructions in this manual. Failure to do so could result in personal injury, death, and/or damage to your DVDM-800 and/or to your vehicle.
WELCOME
Congratulations on the purchase of your Delphi Mobile Video DVDM-800. This unit will provide numerous hours of video entertainment for your backseat passengers. Your DVDM-800 will play DVDs, audio CDs, MP3 discs, and video CDs. It is not compatible with CD-I discs, CD-ROMs, DVD-ROMs, laser discs, or minidiscs. Use this manual to learn how to operate your DVDM-800 safely and effectively and find out about the different features.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
CAUTION
· Use only a soft, dry cloth to clean the outside of your DVDM-800 and any peripherals. · Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives. · Do not use sprays near your unit. · Refrain from using food or drinks near the remote control. Spilling food or drinks on the remote could damage it. · Keep hands or materials away from the LCD video monitor to avoid surface scratches. · Push the panel buttons gently to avoid damage to the hinge. · Close the unit when not in use. · Do not leave the unit's dome light on while the vehicle is unattended. The dome light could drain the vehicle's battery. · When not in use, place the remote control and headphones where they will not be damaged. · Before putting on headphones, always adjust the volume setting at the lowest level to avoid possible hearing damage.
Warning: When using your DVDM-800, it is your sole responsibility to secure and use the device in a manner that will not cause accidents, personal injury or property damage, or in any manner obstruct your view or interfere with the operation of vehicle safety equipment. It is your sole responsibility that this device is properly installed and that these operating instructions are read carefully, understood, and used consistent with the laws of operation for any state or country in which you use the device and with common sense. Failure to do so may result in an accident and personal injury, death, and/or property damage to your DVDM-800 and/or vehicle. DELPHI DISCLAIMS ALL LIABILITY FOR ANY USE OF THIS PRODUCT IN A WAY THAT MAY CAUSE ACCIDENTS, DAMAGE, OR THAT MAY VIOLATE THE LAW.
CONTENTS
Section 1: Unpacking DVDM-800 . . . . . . . . . . . . 3 Section 2: Features . . . . . . . . . . . . . . . . . . . . . . . 3 Section 3: Controls . . . . . . . . . . . . . . . . . . . . . . . 4
Warning: The driver should never operate DVDM-800--either by remote control or by using the buttons on the unit--while the vehicle is in motion. Do not let passengers unfasten seatbelts to operate the unit. Only passengers should use the remote control during vehicle operation. Failure to do so may result in an accident and personal injury, death, and/or property damage to your DVDM-800 and/or to your vehicle.
Section 4: Getting Started . . . . . . . . . . . . . . . . . 6 Section 5: OSD Commands and Settings . . . . . 7 Section 6: Other Features and Parental Controls . . . . . . . . . . . . . . . 10 Section 7: Troubleshooting . . . . . . . . . . . . . . . . 11
Warning: To reduce the risk of fire or shock hazard, do not expose DVDM-800 to rain or moisture.
Section 8: Warranty . . . . . . . . . . . . . . . . . . . . . . 12
Warning: This product utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Do not open cover. Refer servicing to qualified service technician.
2
SECTION 1: UNPACKING DVDM-800
Here's what you should find in the DVDM-800 box:
4
Power cable
5
A/V cable
2
Two sets of wireless headphones (requires 2 AAA batteries, included)
3
Remote control (requires 2 AAA batteries, included)
6
A/V connection box
1
DVDM-800 unit with DVD player and 8" LCD monitor
MV10002-11B1 (Gray, 1-year warranty) MV10015-11B1 (Neutral, 1-year warranty) MV10017-11B1 (Gray, 3-year warranty) MV10016-11B1 (Neutral, 3-year warranty)
7
Wireless FM transmitter (factory installed)
8
User Manual and Installation Guide
9
Galvanized steel mounting bracket
10
Screws and spacers
Note: Installation materials sold separately include a shroud for a professional fit. Delphi highly recommends that you contact a professional to ensure proper installation. To locate a professional installer in your area, contact your retailer. It is your sole responsibility that installation is completed properly and will not result in personal injury, death, and/or damage to your DVDM-800 and/or to your vehicle.
SECTION 2: FEATURES
Disk slot Power Turns DVDM-800 on or off. Front infrared screen Transmits audio to infrared (wireless) headphones and receives infrared signals from the remote control. Dome light LCD panel release Releases the LCD panel. Air intake vents Adjuster knob Adjusts the angle of the screen panel. Light sensor Slot indicator A green backlit LED indicates disc slot location so users can see where to insert a disc. The LED is off when there is a disc in the player. Eject Stops play. Press again to eject disc. Button is backlit orange when power is on. Eject functions even when unit is off.
EJECT
Dome light Dome light switch button Turns the dome lights on, or sets them to turn on automatically when the vehicle's interior lighting is activated. Reset pin hole Screen power switch Turns screen off when panel is closed. (Audio continues to function.)
Thin film transistor video monitor
Control buttons (See Section 3.) A/V 3 inputs Rear infrared screen For remote control operation only.
3
SECTION 3: CONTROLS
LCD PANEL
Reverse Volume down Volume up Display Forward Pause/play A/V Menu
DSPL
Displays an on-screen display (OSD) menu for control of disc, monitor, FM transmitter, IR transmitter, and A/V source functions. When in "Display" mode, press again to return to normal play. · When playing video or audio discs, these buttons increase or decrease the volume level. · When in "Display" mode after pushing DSP , these work as navigational tools to move up and down menu options. · When playing video or audio discs, pressing this button once returns to the beginning of the current chapter or track, and pressing it again returns to previous chapters or tracks. · When in "Display" mode after pushing DSP , this button works as a navigational tool to move left in menu options. · Holding the button down during play enters reverse play mode. Continue pressing to go 2X, 4X, 8X, and 15X the normal speed. Pressing at 15X returns to normal speed. · After pressing to pause play, press to reverse one frame. For slow motion reverse play, hold the button down to go 50% and 75% normal speed. Press to resume normal play. · When playing video or audio discs, pressing this button advances to the next chapter or track. · When in "Display" mode after pushing DSP , this button works as a navigational tool to move right in menu options. · Holding the button down during play enters fast forward mode. Continue pressing to go 2X, 4X, 8X, and 15X the normal speed. Pressing at 15X returns to normal speed. · After pressing to pause play, press to advance one frame. For slow motion play, hold the button down to go 5%, 8%, 12%, 20%, 40%, and 70% normal speed. Press to resume normal play. · When playing video or audio discs, pressing this button initiates play. Press once to pause play. Press again to resume play. · When in "Display" mode after pushing DSP , this button functions as an "Enter" button to select options. Selects A/V 1, A/V 2, A/V 3, or DVD player inputs, i.e. if a video game is plugged into the A/V 2 ports, the A/V 2 option must be selected. Displays the disc's main menu. Press again to resume play.
4
REMOTE CONTROL
Light sensor Power Number keys
POWER EJECT
Eject
1
2
3
4
5 8
6
7
9 0
A/V Previous/reverse Stop Menu Display Channel up Enter Left Zoom Subtitle Overhead Headrest 1
A /V
VOL
Volume Next/forward Pause/play
· When playing video or audio discs, pressing this button advances to the next chapter or track. · Holding the button down during play enters fast forward mode. Continue pressing to go 2X, 4X, 8X, and 15X the normal speed. Pressing at 15X returns to normal speed. · After pressing to pause play, press to advance one frame. For slow motion play, hold the button down to go 5%, 8%, 12%, 20%, 40%, and 70% normal speed. Press to resume normal play. Stops play. Initiates play. Press once to pause play. Press again to resume play. Displays the disc's main menu. Press again to resume play.
DSPL
MENU
MUTE
Mute Return Right
DSPL
CH
RET
ENTER
SU B
CH
D AU
OH HR1 HR2
AUX
Channel down Repeat Audio Auxiliary Headrest 2
R
E
POWER
Turns DVDM-800 on or off. Stops play and ejects disc. Number keys are used to enter setup, program, track, and numerical options. Increases or decreases volume.
ENTER
ZO O M
P
Displays on-screen display (OSD) menu for control of disc, monitor, FM transmitter, IR transmitter, and A/V source functions. When in "Display" mode, press again to return to normal play. Mutes all audio. Press again to return audio. Returns to main menu of a video CD. Selects a highlighted option. Use to navigate menu options.
Note: Pressing the button moves the cursor to the top of a list of menu options, pressing the button moves the cursor to the bottom of the list.
MUTE
EJECT
1
CH
VOL
Selects A/V 1, A/V 2, A/V 3, or DVD player inputs, i.e. if a video game is plugged into the A/V 2 ports, the A/V 2 option must be selected. · When playing video or audio discs, pressing this button once returns to the beginning of the current chapter or track, and pressing it again returns to previous chapters or tracks. · Holding the button down during play enters reverse play mode. Continue pressing to go 2X, 4X, 8X, and 15X the normal speed. Pressing at 15X returns to normal speed. · After pressing to pause play, press to reverse one frame. For slow motion reverse play, hold the button down to go 50% and 75% normal speed. Press to resume normal play.
Zooms picture in/out when playing a video disc. When zooming in, use the navigation buttons on the remote to move the picture. Displays subtitles (and language), when available. Selects audio language, when available. Enters "Repeat" mode. This button must be pressed to operate overhead video display. Sets the remote to operate video unit installed in a headrest. (Future application.) Sets the remote to operate video unit installed in a headrest. (Future application.) Sets the remote to operate video game system, camcorder, or other A/V devices that are connected through an A/V input. (Future application.) 5
HR1
HR2
AUX
R
OH
EP
ZO
SU
O
D AU
M
B
SECTION 4: GETTING STARTED
There are four ways to turn on DVDM-800: · Press the button on the unit. · Press the POWER button on the remote control. · Lower the screen panel by pressing the release button. · Insert a disc.
OPERATING HEADPHONES
Your DVDM-800 includes a built-in infrared transmitter for use with Delphi wireless headphones. The headphones operate on a frequency from 2.3 Mhz to 2.8 Mhz. Adjust the volume using the volume control on the headphone. The wireless headphones must be used within a line of sight from the infrared transmitter.
Note: Two AAA batteries must be installed in each set of headphones for operation.
PLAYING A DISC
1. Insert a disc (label side facing up) in the unit's slot.
Caution: If DVDM-800 is in A/V mode, it will not accept a disc. Do not force the disc into the slot as this could damage DVDM-800.
OPERATING THE DOME LIGHTS
The dome lights are integrated into DVDM-800 and are controlled by a two-step button. Press the button once to turn on the lights. Press again to set them to operate with the rest of the vehicle's interior lighting system.
Caution: Do not leave the vehicle unattended with the dome light switch in the on position, as this could result in a discharged battery.
2. DVDM-800 automatically detects whether you have inserted a DVD, audio CD, a video CD, or a disc containing MP3 files and displays the disc's main menu. Using the navigation buttons on the screen panel or remote as described in Section 3, select an option.
Note: When playing audio over the vehicle's audio system, make sure vehicle radio channel selection matches wireless FM transmitter settings. See page 9.
ADJUSTING THE SCREEN PANEL ANGLE
Turn the knob to adjust the viewing angle of the screen. DVDM-800 has a mechanical memory and will automatically return to your setting when you lower the panel again.
OPERATING THE REMOTE CONTROL
DVDM-800 incor ...