Detailed instructions for use are in the User's Guide.
CR500 Owner's Manual (V1.10 Supplement)
CR500 Owner's Manual (V1.10 Supplement)
With the software upgrade of the CR500, the track increment function has been newly added. This function is useful when recording to a CD-DA disc (the track increment function does not work when recording a BWF file). The track increment function automatically creates a new audio track during CD-DA recording by pressing the [RECORD] key while the [SHIFT] mode is active. Therefore, using this function, you can create a track for each song during live recording.
When a track is incremented by the track increment function, an approximately 100 ms gap (silent space) is inserted between tracks. That is, when you burn an audio CD using this function and play it back using any CD player other than the CR500, it is played back with a silent space between tracks (though it is played back with no silent space between tracks when you use the CR500). Therefore, it is recommended not to execute this function in the middle of a song. Execute this function at a point between songs, etc.
[SHIFT] key
MEMORY DISPLAY 1
CONTRAST
FILE SEL
MEMORY SET
LOCATE 2
space ABC
SHIFT
EXIT/NO
3
DEF
EDIT TIME
PUSH MENU/ENTER/YES
CLEAR 4 5
GHI JKL
6
MNO
+10
DIR SEL
REC RDY 7
PQRS
REC END ABS 0
SKIP/CURSOR 8
TUV
9
WXYZ
0
symbol
RECORD
STOP/HOME
PLAY
REWIND
F FWD
[RECORD] key
: Pressing the [RECORD] key while the SHIFT mode is active during recording turns off the shift mode. To divide the track again, do not forget to press the [SHIFT] key to turn on the shift mode before pressing the [RECORD] key.
When you stop recording, an audio track is created on a disc. The following shows the screen example when you disable the record ready mode after you stop recording.
Rec Start Rec End
Track 01
By using the track increment function, you can create more than one audio track in a single recording process. If you execute the track increment function three times during live recording as in the figure below, four audio tracks are created. The following shows the screen example when you disable the record ready mode after you stop recording.
Rec Start Rec End
Track 01
Track 02
Track 03
Track 04
© PRINTED IN CHINA JANUARY 2007 8588097000 (457649)
...