Plantronics Ltd - Released M3000 Pairing Instructions ­ Nokia 3650 Mobile Phone Before pairing the Plantronics M3000 with the Nokia 3650, please ensure both devices are fully charged according to the instructions in the respective User Guides. 1. Turn the Nokia 3650 phone and the Plantronics M3000 headset ON. 2. On the 3650: a) Press the Menu key, then use the scroll keys to choose the Connectivity menu. Press the middle of the scroll key to Select. b) Use the scroll keys to choose the Bluetooth menu (this is normally the menu displayed) and press the middle of the scroll key to select. c) Use the scroll keys to choose the choose Bluetooth Off (this is normally the menu displayed) and press the middle of the scroll key to select. d) The handset will display Bluetooth On. In this menu. Bluetooth is now be switched on in the phone. 3. On the Plantronics M3000: a) Put the M3000 into pairing mode by press the "Volume Up" & "Call Control" buttons simultaneously until the Indicator light begins to flash alternate green and red. (see M3000 User Instructions). 4. On the Nokia 3650: a) In the Bluetooth menu, use the right scroll menu to select the Paired devices menu b) Press the Options key, scroll to New paired device (default) and press Select. The phone displays Searching for audio accessories c) In a few moments, the phone will display all nearby Bluetooth devices. Using scroll key, choose M3000 by Plantronics and press the Select key. d) Enter the 4-digit Passkey 0000 and press the OK key. The handset will display Pairing with M3000 by Plantronics complete. e) The M3000 will appear in the Paired device list. Your M3000 headset is now paired with the 3650 phone. 3650 M3000 pair rev002 1 24th July 2003 Plantronics Ltd - Released Before connecting the headset to the phone, please do the following: a) While in the Bluetooth menu, use the scroll keys to select Paired Devices. b) The display will show M3000 by ... and possibly other devices. Use the scroll key to select M3000 by ... and press Options c) Use the scroll keys to select Set as authorised. Press Select. The display will show Connections will take place automatically without confirmation. Continue? Press Yes. The headset must now be connected to the phone. This can be done in 2 ways: Using the Phone Menu a) While in the Bluetooth, use the scroll keys to select Paired Devices. b) The display will show M3000 by Plant ... and possibly other devices. Use the scroll key to select M3000 by Plant ... and press Options c) Use the scroll keys to select Connect then press Select d) The phone will display Connecting to M3000 by plantronics, then Connected to M3000 by plantronics. e) Press the End Call button to return to main menu. Using the M3000 headset If the headset is switched off, it will be disconnect from the 3650. The headset can be reconnected by simply pressing the headset Call Control button. 3650 M3000 pair rev002 2 24th July 2003 Plantronics Ltd - Released Making and Accepting Calls To accept an in-coming call via the M3000 Headset 1. An in-coming call will cause both the phone and the headset to ring. Note that there may be a delay of a few seconds between the phone ringing and the headset starting to ring. 2. When you hear the ringing tone in the M3000 headset, press the "Call Control" button to answer the call. If you press the "Call Control" button before the headset starts to ring the call may not be answered and an error tone will sound in the headset. Once you hear this tone you can then press the "Call Control" button to pick up the call. To end a call using the M3000 Headset The call can be ended either by pressing the "End / No" key on the 3650 or by pressing the "Call Control" button on the M3000. To place a call using the keypad: 1. Dial the number as normal and press the "Call" key on the 3650. The call can be ended either in the phone or by the headset ­ see above. To place a call using Voice Dialing with the M3000 Headset: NB: Before using the M3000 for voice dialling, ensure that you have followed the instructions in the Nokia 3650 User Guide for voice dialling, and that you have recorded the names of the contacts you wish to call via voice dialling. Place a test call from the 3650 using voice dialling to ensure that it is working before using the M3000 headset. 1. Press and hold the "Call Control" button on the M3000 until you hear a beep in the headset. After a moment you will hear another beep in the headset as a prompt for voice dialling and the phone display will show "Speak Now" 2. State the name of the contact you wish to dial and the call will be placed. To place a call using Last Number redial 1. Double press the "Call Control" button in quick succession. The last number dialled will be called. 3650 M3000 pair rev002 3 24th July 2003 Plantronics Ltd - Released M3000 Pairing Instructions ­ Nokia 6310 Mobile Phone Before pairing the Plantronics M3000 with the Nokia 6310, please ensure both devices are fully charged according to the instructions in the respective User Guides. 1. Turn the Nokia 6310 phone and the Plantronics M3000 headset ON. 2. On the 6310: a) Press "Menu" key, then use the or keys to choose the "Bluetooth" menu. b) Press "Select" again. Use the or keys to choose "On". c) Press "Select". The handset will display "Bluetooth switched on". Bluetooth is now switched on in the phone. 3. On the Plantronics M3000: a) Put the M3000 into pairing mode by press the "Volume Up" & "Call Control" buttons simultaneously until the Indicator light begins to flash alternate green and red. (see M3000 User Instructions). 4. On the Nokia 6310: a) In the "Bluetooth" menu, use the or keys to select "Search for audio accessories" b) In a few moments, the phone will display all nearby Bluetooth devices. Using the or keys, choose "M3000 by Plantronics" and press the "Select" key. c) Enter the 4-digit Passkey 0000 and press the "OK" key. The handset will display "Paired with M3000 by Plantronics" and then "Connected to M3000 by Plantronics". d) Use the "Back" key to return to the main menu Your M3000 headset is now paired and connected with the 6310 phone. If the headset is switched off, it will be disconnected from the 6310. The headset can be reconnected using the 6310 Bluetooth menu, or alternatively, by simply pressing the Call Control button of the headset. However, a menu option must be set on the phone. Before doing this, switch off the headset: a) To allow the headset to connect to the phone automatically, the phone must be configured correctly. Press Menu key, then use the or keys to Select the Bluetooth menu. 6310 M3000 pair rev002 1 24th July 2003 Plantronics Ltd - Released b) In the Bluetooth menu, use the or keys to select View Paired Devices. Press Select. c) The display will show M3000 by ... and possibly other devices. Select M3000 by ... and press Options d) Use the or keys to select Request conn. authorization. Press Select. e) The display will show Yes or No. Use the or keys to choose No and press the Select. f) The phone will display No authorisation required. Return to main menu. Switch on the M3000 headset. Press the Call Control button on the M3000 and the headset will connect to the phone. 6310 M3000 pair rev002 2 24th July 2003 Plantronics Ltd - Released Making and Accepting Calls To accept an in-coming call via the M3000 Headset 1. An in-coming call will cause both the phone and the headset to ring. Note that there may be a delay of a few seconds between the phone ringing and the headset starting to ring. 2. When you hear the ringing tone in the M3000 headset, press the "Call Control" button to answer the call. If you press the "Call Control" button before the headset starts to ring the call may not be answered and an error tone will sound in the headset. Once you hear this tone you can then press the "Call Control" button to pick up the call. To end a call using the M3000 Headset The call can be ended either by pressing the "End Call" key on the 6310 or by pressing the "Call Control" button on the M3000. To place a call using the keypad: 1. Dial the number as normal and press the "Call" key on the 6310. The call can be ended either in the phone or by the headset ­ see above. To place a call using Voice Dialing with the M3000 Headset: NB: Before using the M3000 for voice dialling, ensure that you have followed the instructions in the Nokia 6310 User Guide for voice dialling, and that you have recorded the names of the contacts you wish to call via voice dialling. Place a test call from the 6310 using voice dialling to ensure that it is working before using the M3000 headset. 1. Press and hold the "Call Control" button on the M3000 until you hear a beep in the headset. After a moment you will hear another beep in the headset as a prompt for voice dialling and the phone display will show "Speak Now" 2. State the name of the contact you wish to dial and the call will be placed. To place a call using Last Number redial 1. Double press the "Call Control" button in quick succession. The last number dialled will be called. 6310 M3000 pair rev002 3 24th July 2003 Plantronics Ltd - Released M3000 Pairing Instructions ­ Sony Ericsson T68 Mobile Phone Before pairing the Plantronics M3000 with the Sony Ericsson T68, please ensure both devices are fully charged according to the instructions in the respective User Guides. 1. Turn the Sony Ericsson T68 phone and the Plantronics M3000 headset ON. 2. On the T68, using the Joystick: i. Select "Connect" and press the joystick. ii. Scroll down to "Bluetooth" and press the joystick iii. Scroll down to "Operation Mode", and press the joystick iv. Scroll down to "On" and press the joystick. Bluetooth is now be switched on in the phone. Note: If Bluetooth has already been activated, press the "No" Key (End Call button). 3. On the Plantronics M3000: i. Put the M3000 into pairing mode by press the "Volume Up" & "Call Control" buttons simultaneously until the Indicator light begins to flash alternate green and red. (see M3000 User Instructions). 4. On the Sony Ericsson T68 under "Bluetooth" menu: i. Scroll down to "Paired Devices" and press the joystick ii. The phone will display "Add Device". Press the joystick. iii. Scroll to "Phone initiates" and press the joystick. iv. Scroll to "Headset" and press the joystick. v. The phone will display "Searching" vi. After a few moments the phone will display all the Bluetooth devices within range. Select the "M3000 by Plant" and press the joystick. vii. The phone will request the "Passkey:". Enter 0000 using the keypad then press the joystick. The phone will display "Pairing" followed by "Pairing Successful". viii. The phone will show "Name Tag:" M3000 by Plantronics. Press the joystick. ix. The phone will show "Added to Paired Devices" x. Use the "No" Key (End Call button) to return to the main menu. Your M3000 headset is now paired with the T68 phone. T68 M3000 pair rev002 1 24th July 2003 Plantronics Ltd - Released Making and Accepting Calls To accept an in-coming call via the M3000 Headset 1. An in-coming call will cause both the phone and the headset to ring. Note that there may be a delay of a few seconds between the phone ringing and the headset starting to ring. 2. When you hear the ringing tone in the M3000 headset, press the "Call Control" button to answer the call. If you press the "Call Control" button before the headset starts to ring the call may not be answered and an error tone will sound in the headset. Once you hear this tone you can then press the "Call Control" button to pick up the call. To end a call via the M3000 Headset The call can be ended either by pressing the "Call End / No" key on the T68 or by pressing the "Call Control" button on the M3000. To place a call using the keypad: 1. Dial the number as normal and press the "Call" key on the T68. The audio will automatically be transferred to the headset. To place a call using Voice Dialing with the M3000 Headset: NB: Before using the M3000 for voice dialling, ensure that you have followed the instructions in the Sony Ericsson T68 User Guide for voice dialling, and that you have recorded the names of the contacts you wish to call via voice dialling. Place a test call from the T68 using voice dialling to ensure that it is working before using the M3000 headset. 1. Press and hold the "Call Control" button on the M3000 until you hear a beep in the headset. After a moment you will hear another beep in the headset as a prompt for voice dialling and the phone display will show "After the tone, say a name or command" 2. State the name of the contact you wish to dial and the call will be placed. T68 M3000 pair rev002 2 24th July 2003 Plantronics Ltd - Released M3000 Pairing Instructions ­ Sony Ericsson T610 Mobile Phone Before pairing the Plantronics M3000 with the Sony Ericsson T610, please ensure both devices are fully charged according to the instructions in the respect ...