User manual HP LASERJET 6L - PCL/PJL REFERENCE - PRINTER JOB LANGUAGE TECHNICAL REFERENCE ADDENDUM

hpPCL/PJL reference printer job language technical reference addendum hp LaserJet printer family reference Copyright and License © 2003 Copyright Hewlett-Packard Development Company, LP All Rights Reserved. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. Trademark Credits Adobe, Acrobat, and PostScript are trademarks of Adobe Systems Incorporated. ® ENERGY STAR and the Energy Star logo are U.S. registered service marks of the United States Environmental Protection Agency. Microsoft, MS Windows, Windows, Windows NT, and MS-DOS are U.S. registered trademarks of Microsoft Corporation. The information contained in this document is subject to change without notice. Publication number: 5851-1651 Edition 1, 6/2003 Contents Tables 1 Introduction Introduction to PJL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Using the PJL reference books. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Related documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2 Job Finishing Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Job finishing for HP LaserJet 9000 series products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PJL commands for the 3,000-sheet stacker/stapler . . . . . . . . . . . . . . . . . . . . . . . . . . PJL commands for the 3,000-sheet stacker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Job Finishing for HP LaserJet 9000mfp series products . . . . . . . . . . . . . . . . . . . . . . . . . PJL commands for the HP multifunction finisher . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 11 11 14 15 15 3 Product-specific features Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 PJL feature support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 PJL environment variable support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 4 PJL status codes Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Status code groupings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Informational messages (10xxx) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Background paper-loading messages (11xyy) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Background paper-tray status messages (12xyy). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Output-bin status messages (15xxy) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PJL parser errors (20xxx) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PJL parser warnings (25xxx) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PJL semantic errors (27xxx) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Auto-continuable conditions (30xxx) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PJL file system errors (32xxx). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Potential operator intervention conditions (35xxx) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operator intervention conditions (40xxx) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Foreground paper-loading messages (41xyy) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Jam messages (LaserJet 5Si/5SiMx only) (42xyy) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Optional (external) paper-handling device messages (43xyy) . . . . . . . . . . . . . . . . . . . . LaserJet 4000 / 5000 series jam messages (44xyy). . . . . . . . . . . . . . . . . . . . . . . . . . . . Hardware errors (50xxx) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Personality errors (55xxx) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 117 118 121 123 124 125 127 128 129 131 133 135 141 143 144 146 147 150 Index ENWW Contents 3 4 ENWW Tables Table 1. Table 2. Table 3. Table 4. Table 5. Table 6. Table 7. Table 8. Table 9. Table 10. Table 11. Table 12. Table 13. Table 14. Table 15. Table 16. Table 17. Table 18. Table 19. Table 20. Table 21. Table 22. Table 23. Table 24. Table 25. Table 26. Table 27. Table 28. Table 29. Table 30. Table 31. Table 32. Table 33. Table 34. Table 35. Table 36. Table 37. Contents of PJL feature-support tables . . . . . . . . . . . . . . . . . . . . . . . . . 17 PJL feature support for HP LaserJet products . . . . . . . . . . . . . . . . . . . . 18 PJL feature support for HP LaserJet products . . . . . . . . . . . . . . . . . . . . 19 PJL feature support for HP LaserJet products . . . . . . . . . . . . . . . . . . . . 20 PJL feature support for HP LaserJet products . . . . . . . . . . . . . . . . . . . . 21 PJL feature support for HP color LaserJet products . . . . . . . . . . . . . . . . 22 PJL feature support for HP color LaserJet products . . . . . . . . . . . . . . . . 23 Table contents for PJL environment variable support. . . . . . . . . . . . . . . 24 PJL environmental variables for HP LaserJet products . . . . . . . . . . . . . 25 PJL environmental variables for HP LaserJet products . . . . . . . . . . . . . 41 PJL environmental variables for HP LaserJet products . . . . . . . . . . . . . 55 PJL environmental variables for HP LaserJet products . . . . . . . . . . . . . 71 PJL environmental variables for HP color LaserJet products . . . . . . . . 86 PJL environmental variables for HP color LaserJet products . . . . . . . 101 Informational messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 Tray codes for background paper-loading messages. . . . . . . . . . . . . . 121 Media codes for background paper-loading messages . . . . . . . . . . . . 121 Tray codes for background paper-tray status messages . . . . . . . . . . . 123 Status codes for background paper-tray status messages . . . . . . . . . . 123 Output-bin status messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 Status codes for output-bin status messages . . . . . . . . . . . . . . . . . . . . 124 PJL parser errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 PJL parser warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 PJL semantic errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 Auto-continuable conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 PJL file system errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 Potential operator intervention conditions . . . . . . . . . . . . . . . . . . . . . . . 133 Operator intervention conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 Tray codes for foreground paper-loading messages . . . . . . . . . . . . . . 141 Media codes for foreground paper-loading messages . . . . . . . . . . . . . 141 Jam messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 Optional (external) paper-handling device messages. . . . . . . . . . . . . . 144 Optional (external) paper-handling device messages. . . . . . . . . . . . . . 144 HP LaserJet 4000 and 5000 series jam messages . . . . . . . . . . . . . . . 146 Jam location codes for HP LaserJet 4000 and 5000 series jam messages . . . . . . . . . . . . . . . 146 Hardware errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 Personality errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 ENWW Contents 5 6 ENWW 1 Introduction Introduction to PJL The Hewlett-Packard Printer Job Language (PJL) was developed to provide more job-level printer control within software programs. PJL provides for the special needs of networks and other multi-user systems.It also simulates control-panel functions that previously could only be controlled by pressing control-panel buttons. In the HP printers that support it (HP LaserJet, HP Deskjet, HP Business Inkjet, and HP Designjet), PJL provides job-level control that cannot be accomplished with PCL, PostScript® (PS), or other printer languages. To establish this control, PJL functions "above" the level of PCL and other printer languages, and provides four major functions: printer-language switching between jobs job separation printer configuration status readback from the printer to the host computer Hewlett-Packard developed PJL to provide a method for switching printer languages at the job level, and to offer status readback between the printer and the host computer. Software programs can use PJL to control HP printers remotely. By using PJL, software developers can build software that can programmatically switch printer languages, monitor printer status, request the printer model and configuration, change controlpanel default settings, modify control-panel messages, and more. ENWW Introduction to PJL 7 Using the PJL reference books The Printer Job Language Technical Reference Addendum was written to complement the contents of the Printer Job Language Technical Reference Manual. For general information about PJL, see the Printer Job Language Technical Reference Manual. For product-specific information about PJL as it applies to newer printers, see the Printer Job Language Technical Reference Addendum. These manuals are for experienced users such as software developers and technical support personnel. Before using PJL commands, developers should be familiar with the introductory information in chapters 1, 2, and 3 and with the programming tips in chapter 11 of the PJL Technical Reference Manual. In addition, users should be acquainted with the HP LaserJet Printer Command Language (PCL) and with HP LaserJet printer features. Application developers The Printer Job Language Technical Reference Manual and Printer Job Language Technical Reference Addendum provide developers with all of the information that is required to add PJL to software programs. Examples that are used throughout the manual help developers write efficient and correctly functioning code. Technical support personnel The Printer Job Language Technical Reference Manual and Printer Job Language Technical Reference Addendum provide reference information for network administrators and other technical support personnel who manage multi-user systems. The use of PJL can significantly enhance network printer operation. Non-technical users Non-technical users can use the features of PJL by using software that supports PJL. Because improperly used PJL commands can cause problems in a network situation, inexperienced users are advised against using PJL commands on any system other than a dedicated workstation. Related documents The following documents provide related information about Hewlett-Packard products that support PJL and PCL. PCL 5 Printer Language Technical Reference Manual The PCL 5 Printer Language Technical Reference Manual provides a description of the printer command language that controls PCL 5 products. The document provides explanations of each PCL command, and examples that demonstrate how the commands are used to control the product. A large portion of the document is devoted to HP-GL/2, the vector-based graphics language that is part of all PCL 5 printers. PCL 5 Comparison Guide This document provides printer-specific information about paper handling, internal fonts, PCL command support, and control-panel information. It identifies differences between features that are available in the PCL 5 products, and explain how the products implement the commands that are described in the PCL 5 Printer Language Technical Reference Manual. 8 Chapter 1 Introduction ENWW PCL 5 Comparison Guide Addendum This document complements the PCL 5 Comparison Guide by providing updated productspecific information. This document should be used along with the PCL 5 Comparison Guide. PCL 5 Color Technical Reference Manual This document describes the PCL 5 commands that are used to print color on the HP color LaserJet products and the other Hewlett-Packard PCL 5 color products. Some of the main topics include an overview of the color printing process, using palettes, choosing color modes, adjusting output color to meet your requirements, printing color raster graphics, and using HPGL/2 vector graphics. Examples are provided that demonstrate the use of the PCL 5 color commands. PCL/PJL Technical Quick Reference Guide This document is designed to provide quick access to the syntax of each PCL and PJL command. The commands are grouped by their function so that users who are familiar with PCL or PJL can find the syntax of a specific command without opening the manuals. ENWW Related documents 9 10 Chapter 1 Introduction ENWW 2 Job Finishing Introduction Some printers, such as the HP LaserJet 9000 series, include accessories that enhance the output or finishing capabilities of the product (for example, stapling and stacking capabilities). These accessories can be controlled by using PJL commands as described in this chapter. Job finishing for HP LaserJet 9000 series products The PJL commands that are sent to the product specify the functionality of a particular paperhandling device. These commands can be sent to the printer as a job-by-job command or as a default command. The following PJL commands are used to set the functionality of the 3,000sheet stacker/stapler (product number C8085A) or the 3,000-sheet stacker (product number C8084A) on a job-by-job basis. PJL commands for the 3,000-sheet stacker/stapler Use the following command sequences for the HP LaserJet 9000 series products with the 3,000sheet stacker/stapler accessory (product number C8085A) installed. General considerations for the PJL commands for the 3,000-sheet stacker/ stapler The following are general considerations when using the command sequences in this section. · If the PJL FINISH variable is set to STAPLE and the OUTBIN variable is set to UPPER value, the job is delivered to the `Printer top Bin' without stapling. · If the PJL FINISH variable is set to STAPLE and the OUTBIN variable is set to any other value different than UPPER, (i.e. OPTIONALOUTBIN3 or OPTIONALOUTBINx) the job is delivered to the `Stapler Bin' with the number of staples set in the STAPLEOPTION variable. · If the PJL FINISH variable is set to STAPLE and no STAPLEOPTION value is set, the job is delivered to the `Stapler Bin' using the default STAPLEOPTION value. · The default STAPLEOPTION could be defined through the `Printer Front Panel' or using the HP Jetadmin /HP Web Jetadmin software tools. To set the destination to the stacker bin Use the following command sequence to send the job to the stacker bin. ESC%-12345X @PJL SET OUTBIN=OPTIONALOUTBIN2 @PJL SET FINISH=NONE ESC%-12345X ENWW Introduction 11 To set the destination to the top output bin of the printer Use the following command sequence to send the job to the top output bin of the printer. ESC%-12345X @PJL SET OUTBIN=UPPER @PJL SET FINISH=NONE ESC%-12345X To finish the job with one staple (straight) Use the following command sequence to finish the job with one staple, aligned with the edge of the media. ESC%-12345X @PJL SET OUTBIN=OPTIONALOUTBIN2 @PJL SET FINISH=STAPLE @PJL SET STAPLEOPTION=ONE ESC%-12345X To finish the job with one staple (angled) Use the following command sequence to finish the job with one staple that is angled. ESC%-12345X @PJL SET OUTBIN=OPTIONALOUTBIN2 @PJL SET FINISH=STAPLE @PJL SET STAPLEOPTION=ONEANGLED ESC%-12345X To finish the job with two staples Use the following command sequence to finish the job with two staples. ESC%-12345X @PJL SET OUTBIN=OPTIONALOUTBIN2 @PJL SET FINISH=STAPLE @PJL SET STAPLEOPTION=TWO ESC%-12345X To finish the job with three staples Use the following command sequence to finish the job with three staples. ESC%-12345X @PJL SET OUTBIN=OPTIONALOUTBIN2 @PJL SET FINISH=STAPLE @PJL SET STAPLEOPTION=THREE ESC%-12345X To finish the job with six staples Use the following command sequence to finish the job with six staples. ESC%-12345X @PJL SET OUTBIN=OPTIONALOUTBIN2 @PJL SET FINISH=STAPLE @PJL SET STAPLEOPTION=SIX ESC%-12345X 12 Chapter 2 Job Finishing ENWW To use the custom stapling option Use the following command sequence to turn on the custom stapling option. ESC%-12345X @PJL SET OUTBIN=OPTIONALOUTBIN2 @PJL SET FINISH=STAPLE @PJL SET STAPLEOPTION=CUSTOM ESC%-12345X Note The custom stapling option must be configured with the HP Jetadmin or HP Web Jetadmin tools. After this option is set, use the preceding command sequence to use it. To set the destination to the left bin (face-up bin) Use the following command sequence to send the job to the left bin with the media face-up. ESC%-12345X @PJL SET OUTBIN=LOWER @PJL SET FINISH=NONE ESC%-12345X To set the destination to the stapler output bin (without staples) Use the following command sequence to send the job to the stapler output bin with no staples. ESC%-12345X @PJL SET FINISH=STAPLE @PJL SET STAPLEOPTION=NONE @PJL SET OUTBIN=OPTIONALOUTBIN2 ESC%-12345X ENWW Job finishing for HP LaserJet 9000 series products 13 PJL commands for the 3,000-sheet stacker Use the following command sequences for the HP LaserJet 9000 series products with the 3,000sheet stacker accessory (product number C8084A) installed. To set the destination to the stacker bin Use the following command sequence to send the job to the stacker. ESC%-12345X @PJL SET OUTBIN=OPTIONALOUTBIN2 @PJL SET FINISH=NONE ESC%-12345X To set the destination to the top output bin of the printer Use the following command sequence to send the job to the top output bin of the printer. ESC%-12345X @PJL SET OUTBIN=UPPER @PJL SET FINISH=NONE ESC%-12345X To set the destination to the face-up bin Use the following command sequence to send the job to the face-up bin. ESC%-12345X @PJL SET OUTBIN=OPTIONALOUTBIN1 @PJL SET FINISH=NONE ESC%-12345X Note The default destination is used whenever the PJL OUTBIN variable is not set. To set the default output bin, use the control panel on the front of the product, or use HP Web Jetadmin. 14 Chapter 2 Job Finishing ENWW Job Finishing for HP LaserJet 9000mfp series products The PJL commands that are sent to the product specify functionality of a particular paperhandling device. These commands can be sent to the printer only on a job-by-job basis. The following PJL commands are used to set the functionality of the HP multifunction finisher (product number C8088A) on a job-by-job basis. PJL commands for the HP multifunction finisher The following command sequences can be used for the HP LaserJet 9000mfp series products that have the HP multifunction finisher accessory (product number C8088A) installed. To set the destination to the stacker bin (face-up bin) @PJL SET OUTBIN=OPTIONALOUTBIN1 @PJL SET PROCESSINGTYPE="FACE_UP" @PJL SET PROCESSINGOPTION="FACE_UP" Note This command sequence does not work when combined with a stapling command, because stapled jobs can only be delivered face-down. To set the destination to the stacker bin (face-down) @PJL SET OUTBIN=OPTIONALOUTBIN1 @PJL SET PROCESSINGTYPE="FACE_DOWN" @PJL SET PROCESSINGOPTION="FACE_DOWN" Note This command sequence is unnecessary when combined with a stapling command, because stapled jobs are always delivered face-down. To finish the job with one staple @PJL @PJL @PJL @PJL SET SET SET SET OUTBIN=OPTIONALOUTBIN1 PROCESSINGTYPE="STAPLING" PROCESSINGOPTION="ONE_STAPLE" PAPER=LETTER Note The PJL SET PAPER value will vary, depending on the size that you are using. To finish the job with two staples @PJL @PJL @PJL @PJL SET SET SET SET OUTBIN=OPTIONALOUTBIN1 PROCESSINGTYPE="STAPLING" PROCESSINGOPTION="TWO_STAPLES" PAPER=LETTER Note The PJL SET PAPER value will vary, depending on the size that you are using. ENWW Job Finishing for HP LaserJet 9000mfp series products 15 To finish the job with a fold and saddle stitch @PJL SET DUPLEX=OFF @PJL SET OUTBIN=OPTIONALOUTBIN2 ESC&L2A Note ESC&L2A is the PCL command for letter-sized paper; it must be used to print correctly on LTRR oriented media. The PJL SET PAPER value will vary, depending on the size that you are using. To finish a duplexed job with a fold and saddle stitch @PJL SET DUPLEX=ON @PJL SET BINDING=LONGEDGE @PJL SET OUTBIN=OPTIONALOUTBIN2 ESC&L2A Note ESC&L2A is the PCL command for letter-sized paper; it must be used to print correctly on LTRR oriented media. The PJL SET PAPER value will vary, depending on the size that you are using. You can replace the letter value with any of the other supported values: Legal = ESC&L3A Ledger = ESC&L6A JISB4 = ESC&L46A A4 = ESC&L26A A3 = ESC&L27A 16 Chapter 2 Job Finishing ENWW 3 Product-specific features Introduction This chapter compares the differences in PJL support for newer PJL products. It includes a list of all the PJL commands, showing which commands each PJL product supports. A list of environment variables shows the range that each product supports. The final portion of the chapter describes some important, product-specific information about the different HP products. PJL feature support Table 1 describes the contents of the subsequent feature-support tables for HP LaserJet and HP color LaserJet products. Table 1. Contents of PJL feature-support tables Table and location Table 2 on page 18 Table 3 on page 19 Table 4 on page 20 Table 5 on page 21 Table 6 on page 22 Table 7 on page 23 Features for these products HP LaserJet 1150 series, 1200 series, 1300 series, 2200 series, 2300 series HP LaserJet 4100 series, 4100mfp series, 4200 series, 4300 series HP LaserJet 5100 series, 8150 series, 9000 series, 9000mfp series HP LaserJet 3200mfp series, 3300mfp series HP color LaserJet 2500 series, 4550 series, 4600 series HP color LaserJet 5500 series, 8550 series, 8550mfp series The following tables list the PJL commands and associated variables that each product supports. The letter "Y" indicates that the feature is supported; "ns" indicates that the feature is not supported. Note . The information contained in the following tables is subject to change without notice. To ensure that the specific support information is correct, test the commands on your product. ENWW Introduction 17 Table 2. PJL feature support for HP LaserJet products PJL command name COMMENT DEFAULT DINQUIRE ECHO ENTER EOJ FSAPPEND, FSDIRLIST, FSQUERY, FSUPLOAD FSDELETE FSDOWNLOAD FSINIT FSMKDIR INFO INITIALIZE INQUIRE JOB OPMSG PJL RDYMSG RESET SET STMSG UEL USTATUS USTATUSOFF LaserJet 1150 series Y Y Y Y Y Y ns ns ns ns ns Y Y Y Y Y Y Y Y Y Y Y Y Y LaserJet 1200 series Y Y Y Y Y Y ns ns ns ns ns Y Y Y Y Y Y Y Y Y Y Y Y Y LaserJet 1300 series Y Y Y Y Y Y ns ns ns ns ns Y Y Y Y Y Y Y Y Y Y Y Y Y LaserJet 2200 series Y Y Y Y Y Y ns ns ns ns ns Y Y Y Y Y Y Y Y Y Y Y Y Y LaserJet 2300 series Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y The information contained in this table is subject to change without notice. To ensure that the specific support information is correct, test these functions and commands on your product. 18 Chapter 3 Product-specific features ENWW Table 3. PJL feature support for HP LaserJet products PJL command name LaserJet 4100 series Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y LaserJet 4100mfp series Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y LaserJet 4200 series Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y LaserJet 4300 series Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y COMMENT DEFAULT DINQUIRE ECHO ENTER EOJ FSAPPEND, FSDIRLIST, FSQUERY, FSUPLOAD FSDELETE FSDOWNLOAD FSINIT FSMKDIR INFO INITIALIZE INQUIRE JOB OPMSG PJL RDYMSG RESET SET STMSG UEL USTATUS USTATUSOFF The information contained in this table is subject to change without notice. To ensure that the specific support information is correct, test these functions and commands on your product. ENWW PJL feature support 19 Table 4. PJL feature support for HP LaserJet products PJL command name LaserJet 5100 series Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y LaserJet 8150 series Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y LaserJet 9000 series Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y LaserJet 9000mfp series Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y COMMENT DEFAULT DINQUIRE ECHO ENTER EOJ FSAPPEND, FSDIRLIST, FSQUERY, FSUPLOAD FSDELETE FSDOWNLOAD FSINIT FSMKDIR INFO INITIALIZE INQUIRE JOB OPMSG PJL RDYMSG RESET SET STMSG UEL USTATUS USTATUSOFF The information contained in this table is subject to change without notice. To ensure that the specific support information is correct, test these functions and commands on your product. 20 Chapter 3 Product-specific features ENWW Table 5. PJL feature support for HP LaserJet products PJL command name LaserJet 3200mfp series Y Y Y Y Y Y ns ns ns ns ns Y Y Y Y Y Y Y Y Y Y Y Y Y LaserJet 3300mfp series Y Y Y Y Y Y ns ns ns ns ns Y Y Y Y Y Y Y Y Y Y Y Y Y COMMENT DEFAULT DINQUIRE ECHO ENTER EOJ FSAPPEND, FSDIRLIST, FSQUERY, FSUPLOAD FSDELETE FSDOWNLOAD FSINIT FSMKDIR INFO INITIALIZE INQUIRE JOB OPMSG PJL RDYMSG RESET SET STMSG UEL USTATUS USTATUSOFF The information contained in this table is subject to change without notice. To ensure that the specific support information is correct, test these functions and commands on your product. ENWW PJL feature support 21 Table 6. PJL feature support for HP color LaserJet products PJL command name color LaserJet 2500 series Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y color LaserJet 4550 series Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y color LaserJet 4600 series Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y COMMENT DEFAULT DINQUIRE ECHO ENTER EOJ FSAPPEND, FSDIRLIST, FSQUERY, FSUPLOAD FSDELETE FSDOWNLOAD FSINIT FSMKDIR INFO INITIALIZE INQUIRE JOB OPMSG PJL RDYMSG RESET SET STMSG UEL USTATUS USTATUSOFF The information contained in this table is subject to change without notice. To ensure that the specific support information is correct, test these functions and commands on your product. 22 Chapter 3 Product-specific features ENWW Table 7. PJL feature support for HP color LaserJet products PJL command name color LaserJet 5500 series Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y color LaserJet 8550 series Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y color LaserJet 8550mfp series Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y COMMENT DEFAULT DINQUIRE ECHO ENTER EOJ FSAPPEND, FSDIRLIST, FSQUERY, FSUPLOAD FSDELETE FSDOWNLOAD FSINIT FSMKDIR INFO INITIALIZE INQUIRE JOB OPMSG PJL RDYMSG RESET SET STMSG UEL USTATUS USTATUSOFF The information contained in this table is subject to change without notice. To ensure that the specific support information is correct, test these functions and commands on your product. ENWW PJL feature support 23 PJL environment variable support Table 8 describes the contents of the subsequent environmental-variable support tables for the HP LaserJet and HP color LaserJet products. These tables list all of the current environment variables for PJL, PCL 5, and PostScript (PS), and show the features that each printer supports. Table 8. Table contents for PJL environment variable support Table and location Table 9 on page 25 Table 10 on page 41 Table 11 on page 55 Table 12 on page 71 Table 13 on page 86 Table 14 on page 101 Features for these products HP LaserJet 1150 series, 1200 series, 1300 series, 2200 series, 2300 series HP LaserJet 4100 series, 4100mfp series, 4200 series, 4300 series HP LaserJet 5100 series, 8150 series, 9000 series, 9000mfp series HP LaserJet 3200mfp series, 3300mfp series HP color LaserJet 2500 series, 4550 series, 4600 series HP color LaserJet 5500 series, 8550 series, 8550mfp series The following tables list the PJL commands and associated variables that each product supports. The letter "Y" indicates that the feature is supported; "ns" indicates that the feature is not supported. Note The information contained in the following tables is subject to change without notice. To ensure that the specific support information is correct, test the variable settings on your product. 24 Chapter 3 Product-specific features ENWW Table 9. PJL environmental variables for HP LaserJet products Environment variable AUTOCONT1 Variable values OFF ON BINDING LONGEDGE SHORTEDGE BITSPERPIXEL MINIMUM MAXIMUM DEFAULT CLEARABLEWARNINGS1 1150 series (Y) Y ns ns 1 2 2 ns ns 1 999 1 (Y) Y ns ns ns ns ns 1 5 3 ns ns ns ns (Y) Y ns ns ns ns ns ns ns 1200 series (Y) Y ns ns 1 2 1 ns ns 1 999 1 (Y) Y ns ns ns ns ns 1 5 3 ns ns ns ns (Y) Y ns ns ns ns ns ns ns 1300 series (Y) Y ns ns 1 2 1 ns ns 1 999 1 (Y) Y ns ns ns ns ns 1 5 3 ns ns ns ns (Y) Y ns ns ns ns ns ns ns 2200 series (Y) Y (Y) Y 1 2 1 ns ns 1 999 1 (Y) Y ns ns ns ns ns 1 5 3 ns ns (Y) Y (Y) Y ns ns ns ns ns ns ns 2300 series Y (Y) (Y) Y 1 2 2 (Y) Y 1 32000 32000 (Y) Y (Y) Y Y Y Y 1 5 3 (Y) Y (Y) Y (Y) Y ns ns ns ns (Y) Y Y JOB ON COPIES MINIMUM MAXIMUM DEFAULT COURIER REGULAR DARK CPLOCK2 OFF ON MINIMUM MODERATE MAXIMUM DENSITY1 MINIMUM MAXIMUM DEFAULT DISKLOCK2 OFF ON DUPLEX OFF ON ECONOMODE OFF ON EDGETOEDGE NO YES FIH OFF ON FINISH NONE STAPLE ON The information contained in this table is subject to change without notice. To ensure that the specific support information is correct, test these variable settings on your product. 1 When a SET or DEFAULT command is used with the AUTOCONT, CLEARABLEWARNINGS, or DENSITY variables, both the User Default and PJL Current Environment settings are modified (except for settings in the HP LaserJet 4L, 5L, and 6L printers). It is recommended that these variables not be changed on a job-by-job basis. 2 Can be modified only by using the DEFAULT command. ENWW PJL environment variable support 25 Table 9. PJL environmental variables for HP LaserJet products (continued) Environment variable FINISHEROPTION Variable values MINIMUM MAXIMUM DEFAULT FINISHERTYPE MINIMUM MAXIMUM DEFAULT FORMLINES MINIMUM MAXIMUM DEFAULT HELDJOBTIMEOUT DISABLED ONEHOUR FOURHOURS ONEDAY ONEWEEK HOLD OFF ON PROOF STORE JOB HOLDKEY DEFAULT MAXIMUM LENGTH HOLDTYPE PUBLIC PRIVATE HOSTCLEANINGPAGE 1150 series ns ns ns ns ns ns 5 128 60 ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 1200 series ns ns ns ns ns ns 5 128 60 ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 1300 series ns ns ns ns ns ns 5 128 60 ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 2200 series ns ns ns ns ns ns 5 128 60 ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 2300 series 0 255 0 0 255 0 5 128 60 (Y) Y Y Y Y (Y) Y Y Y ns "" 4 (Y) Y ns ns OFF ON The information contained in this table is subject to change without notice. To ensure that the specific support information is correct, test these variable settings on your product. 26 Chapter 3 Product-specific features ENWW Table 9. PJL environmental variables for HP LaserJet products (continued) Environment variable INTRAY1SIZE Variable values LETTER LEGAL A4 EXECUTIVE LEDGER A3 COM10 MONARCH C5 DL JISB4 JISB5 B5 CUSTOM A5 ROC8K ROC16K JISEXEC LETTERROTATED ANYCUSTOM A4ROTATED ISOB5 ANY EIGHTPOINT5X13 LOCKED UNLOCKED 1150 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 1200 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 1300 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 2200 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns Y (Y) 2300 series Y Y Y Y ns ns Y Y Y Y ns Y Y Y Y ns Y Y ns Y ns Y (Y) Y ns ns The information contained in this table is subject to change without notice. To ensure that the specific support information is correct, test these variable settings on your product. ENWW PJL environment variable support 27 Table 9. PJL environmental variables for HP LaserJet products (continued) Environment variable INTRAY2SIZE Variable values LETTER LEGAL A4 EXECUTIVE LEDGER A3 COM10 MONARCH C5 DL JISB4 JISB5 B5 CUSTOM JPOSTD A5 ROC8K ROC16K JISEXEC LETTERROTATED ANYCUSTOM A4ROTATED ISOB5 ANY EIGHTPOINT5X13 LOCKED UNLOCKED 1150 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 1200 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 1300 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 2200 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns Y (Y) 2300 series (Y) Y Y Y ns ns ns ns ns ns ns Y ns ns ns Y ns Y Y ns ns ns Y Y Y ns ns The information contained in this table is subject to change without notice. To ensure that the specific support information is correct, test these variable settings on your product. 28 Chapter 3 Product-specific features ENWW Table 9. PJL environmental variables for HP LaserJet products (continued) Environment variable INTRAY3SIZE Variable values LETTER LEGAL A4 EXECUTIVE LEDGER A3 COM10 MONARCH C5 DL JISB4 JISB5 B5 CUSTOM JPOSTD A5 ROC8K ROC16K JISEXEC LETTERROTATED ANYCUSTOM A4ROTATED ISOB5 ANY EIGHTPOINT5X13 LOCKED UNLOCKED 1150 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 1200 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 1300 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 2200 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns Y (Y) 2300 series (Y) ns Y ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns Y ns ns ns The information contained in this table is subject to change without notice. To ensure that the specific support information is correct, test these variable settings on your product. ENWW PJL environment variable support 29 Table 9. PJL environmental variables for HP LaserJet products (continued) Environment variable INTRAY4SIZE Variable values LETTER LEGAL A4 EXECUTIVE LEDGER A3 COM10 MONARCH C5 DL JISB4 JISB5 B5 CUSTOM JPOSTD A5 ROC8K ROC16K JISEXEC LETTERROTATED ANYCUSTOM A4ROTATED ISOB5 1150 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 1200 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 1300 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 2200 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 2300 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns The information contained in this table is subject to change without notice. To ensure that the specific support information is correct, test these variable settings on your product. 30 Chapter 3 Product-specific features ENWW Table 9. PJL environmental variables for HP LaserJet products (continued) Environment variable INTRAY5SIZE Variable values LETTER LEGAL A4 EXECUTIVE LEDGER A3 COM10 MONARCH C5 DL JISB4 JISB5 B5 CUSTOM JPOSTD A5 ROC8K ROC16K JISEXEC LETTERROTATED ANYCUSTOM A4ROTATED ISOB5 INTRAY6SIZE INTRAY7SIZE INTRAY8SIZE JOBATTR Tray-dependent Tray-dependent Tray-dependent "attribute string" MAXIMUM LENGTH JOBID OFF ON JOBNAME "jawbone string" MAXIMUM LENGTH JOBOFFSET OFF ON 1150 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 1200 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 1300 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 2200 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns Y (Y) Y Y (Y) 2300 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns Y The information contained in this table is subject to change without notice. To ensure that the specific support information is correct, test these variable settings on your product. ENWW PJL environment variable support 31 Table 9. PJL environmental variables for HP LaserJet products (continued) Environment variable LANG Variable values DANISH GERMAN ENGLISH SPANISH FRENCH ITALIAN DUTCH NORWEGIAN POLISH PORTUGUESE FINNISH SWEDISH TURKISH JAPANESE CZECH HUNGARIAN RUSSIAN TRADITIONALCHINESE 1150 series ns ns (Y) ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 0 50 0 (Y) ns ns ns ns ns ns 1200 series ns ns (Y) ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 0 94 0 (Y) ns ns ns ns ns ns 1300 series ns ns (Y) ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 0 104 0 (Y) ns ns ns ns ns ns 2200 series Y Y (Y) Y Y Y Y Y Y Y Y Y Y ns Y Y Y ns ns ns ns ns ns ns ns ns ns ns 0 103 0 (Y) ns ns ns ns ns ns 2300 series Y Y (Y) Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ns ns Y (Y) ns ns ns ns 0 89 0 (Y) ns ns Y ns ns ns SIMPLIFIEDCHINESE KOREAN LOWCARTRIDGE STOP CONTINUE LOWSUPPLIES STOP CONTINUE LOWTONER STOP CONTINUE OFF ON LPARM: PCL FONTNUMBER MINIMUM MAXIMUM DEFAULT LPARM: PCL FONTSOURCE I M1 M2 M3 M4 M5 S The information contained in this table is subject to change without notice. To ensure that the specific support information is correct, test these variable settings on your product. 32 Chapter 3 Product-specific features ENWW Table 9. PJL environmental variables for HP LaserJet products (continued) Environment variable LPARM: PCL LINETERMINATION Variable values 0 1 2 3 LPARM: PCL PITCH MINIMUM MAXIMUM DEFAULT LPARM: PCL PTSIZE MINIMUM MAXIMUM DEFAULT LPARM: PCL SYMSET (continued on the following page) DESKTOP ISO4 ISO6 ISO11 ISO15 ISO17 ISO21 ISO60 ISO69 ISOL1 ISOL2 ISOL5 ISOL6 ISOL9 LEGAL MCTEXT PC1004 PC775 1150 series (Y) Y Y Y 0.44 99.99 10.00 4.00 999.75 12.00 Y Y Y Y Y Y Y Y Y Y Y Y Y ns Y Y Y Y 1200 series (Y) Y Y Y 0.44 99.99 10.00 4.00 999.75 12.00 Y Y Y Y Y Y Y Y Y Y Y Y Y ns Y Y Y Y 1300 series (Y) Y Y Y 0.44 99.99 10.00 4.00 999.75 12.00 Y Y Y Y Y Y Y Y Y Y Y Y Y ns Y Y Y Y 2200 series (Y) Y Y Y 0.44 99.99 10.00 4.00 999.75 12.00 Y Y Y Y Y Y Y Y Y Y Y Y Y ns Y Y Y Y 2300 series ns ns ns ns 0.44 99.99 10.00 4.00 999.75 12.00 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y The information contained in this table is subject to change without notice. To ensure that the specific support information is correct, test these variable settings on your product. ENWW PJL environment variable support 33 Table 9. PJL environmental variables for HP LaserJet products (continued) Environment variable LPARM: PCL SYMSET (continued from the previous page) Variable values PC8 PC850 PC852 PC858 PC8DN PC8TK PSTEXT ROMAN8 ROMAN9 WIN30 WIN31J WINBALT WINL1 WINL2 WINL5 UCS2 PC866CYR PC866UKR WINCYR ISOCYR PC8GRK PC851GRK WINGRK ISOGRK GREEK8 PC862HEB ISOHEB HEBREW7 HEBREW8 PC864ARA ARABIC8 HPWARA LPARM: PDF OWNERPASSWORD MINIMUM MAXIMUM DEFAULT LPARM: PDF USERPASSWORD MINIMUM MAXIMUM DEFAULT LPARM: POSTSCRIPT PRTSERRS OFF ON 1150 series (Y) Y Y ns Y Y Y Y ns Y ns Y Y Y Y ns Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ns ns ns ns ns ns ns ns 1200 series (Y) Y Y ns Y Y Y Y ns Y ns Y Y Y Y ns Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ns ns ns ns ns ns (Y) Y 1300 series (Y) Y Y ns Y Y Y Y ns Y ns Y Y Y Y ns Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ns ns ns ns ns ns (Y) Y 2200 series (Y) Y Y ns Y Y Y Y ns Y ns Y Y Y Y ns Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y ns ns ns ns ns ns (Y) Y 2300 series (Y) Y Y Y Y Y Y Y Y Y ns Y Y Y Y Y ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns (Y) Y The information contained in this table is subject to change without notice. To ensure that the specific support information is correct, test these variable settings on your product. 34 Chapter 3 Product-specific features ENWW Table 9. PJL environmental variables for HP LaserJet products (continued) Environment variable MANUALDUPLEX Variable values OFF ON MANUALFEED OFF ON MEDIASOURCE DEFAULT AUTOSELECT DEFAULTSOURCETRAY 1150 series ns ns (Y) Y ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 1200 series ns ns (Y) Y ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 1300 series ns ns (Y) Y ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 2200 series ns ns (Y) Y ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 2300 series (Y) Y (Y) Y Y Y Y Y Y Y Y ns ns Y ns ns ns ns ns ns ns ns ns MANUALFEED TRAY1 TRAY2 TRAY3 TRAY4 ENVELOPE TRAY DUPLEXTRAY EXTERNALTRAY EXTERNALTRAY02 EXTERNALTRAY03 EXTERNALTRAY04 EXTERNALTRAY05 o o o EXTERNALTRAY32 The information contained in this table is subject to change without notice. To ensure that the specific support information is correct, test these variable settings on your product. ENWW PJL environment variable support 35 Table 9. PJL environmental variables for HP LaserJet products (continued) Environment variable MEDIATYPE Variable values DEFAULTMEDIATYPE 1150 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns (Y) Y ns ns ns ns ns 12 999 72 ns ns 1200 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns (Y) Y ns ns ns ns ns 12 999 72 ns ns 1300 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns (Y) Y ns ns ns ns ns 12 999 72 ns ns 2200 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns Y (Y) (Y) Y ns ns ns ns ns 12 999 72 ns ns 2300 series Y Y Y Y Y Y Y Y Y Y Y ns ns Y Y ns Y ns ns ns ns ns ns ns ns ns ns ns (Y) Y Y ns 0 255 0 0 999 72 ns ns ANY PLAIN PREPRINTED LETTERHEAD TRANSPARENCY PREPUNCHED LABELS BOND RECYCLED COLOR LIGHT HEAVY CARDSTOCK ROUGH VELLUM ENVELOPE GLOSSY HEAVYGLOSSY TOUGHPAPER USERTYPE1 USERTYPE2 USERTYPE3 USERTYPE4 USERTYPE5 MPTRAY MANUAL CASSETTE FIRST ORIENTATION PORTRAIT LANDSCAPE OUTBIN UPPER LOWER OUTBINPROCESS MINIMUM MAXIMUM DEFAULT OUTLINEPOINTSIZE MINIMUM MAXIMUM DEFAULT OUTTONER STOP CONTINUE The information contained in this table is subject to change without notice. To ensure that the specific support information is correct, test these variable settings on your product. 36 Chapter 3 Product-specific features ENWW Table 9. PJL environmental variables for HP LaserJet products (continued) Environment variable PAGEPROTECT Variable values AUTO ON PAPER (Letter, Legal, Ledger, A3, A4, Executive, JISB4, and JISB5 are paper sizes; Com10, C5, DL, Monarch, and B5 are envelope sizes; JPOST and JPOSTD are Japanese postcard sizes; CUSTOM is for feeding other sizes, such as 3 x 5 cards and labels) A3 A41 A5 B5 CUSTOM COM10 C5 DL1 EXECUTIVE ISOB5 JISB4 JISB5 JISEXEC JPOST JPOSTD LEDGER LEGAL LETTER1 MONARCH ROC8K ROC16K EIGHTPOINT5X13 FOOLSCAP PASSWORD2 MINIMUM MAXIMUM DEFAULT PERSONALITY AUTO PCL POSTSCRIPT PDF PLANESINUSE 3 1 POWERSAVE ON OFF POWERSAVEMODE ENERGYSTAR BLUEANGEL 1150 series ns ns ns Y Y Y Y Y Y Y Y Y ns Y ns Y Y ns Y (Y) Y ns Y ns Y 0 65535 0 1200 series (Y) Y ns Y Y Y Y Y Y Y Y Y ns Y ns Y Y ns Y (Y) Y ns Y ns Y 0 65535 0 1300 series ns ns ns Y Y Y Y Y Y Y Y Y ns Y ns Y Y ns Y (Y) Y ns Y ns Y 0 65535 0 2200 series (Y) Y ns Y Y Y Y Y Y Y Y Y ns Y ns Y Y ns Y (Y) Y ns Y ns Y 0 65535 0 2300 series ns ns ns Y Y Y Y Y Y Y Y Y ns Y Y ns Y ns Y (Y) Y ns Y Y ns 0 65535 0 (Y) Y Y ns ns (Y) (Y) Y ns ns (Y) Y ns ns ns ns ns ns ns ns (Y) Y Y ns ns ns ns ns ns ns (Y) Y Y ns ns ns ns ns ns ns (Y) Y Y ns ns ns ns ns ns ns The information contained in this table is subject to change without notice. To ensure that the specific support information is correct, test these variable settings on your product. 1 If configured for metric paper sizes, A4 is the default paper size and DL is the default envelope size. 2 The PASSWORD variable is only supported with the DEFAULT, DINQUIRE, and INQUIRE. ENWW PJL environment variable support 37 Table 9. PJL environmental variables for HP LaserJet products (continued) Environment variable POWERSAVETIME Variable values 1 15 30 60 90 120 240 PRINTONBACKSIDE ON OFF PROCESSINGBOUNDARY MOPY 1150 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 0 999 0 (Y) Y Y Y (Y) Y (Y) Y ns ns ns ns ns ns 1200 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 0 999 0 (Y) Y Y Y Y (Y) (Y) Y ns ns ns 0 65535 0 1300 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 0 999 0 (Y) Y Y Y Y (Y) (Y) Y ns ns ns ns ns ns 2200 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 0 999 0 (Y) Y Y Y Y (Y) (Y) Y ns ns ns 0 65535 0 2300 series Y Y Y Y Y Y Y Y (Y) (Y) Y "" 16 "" 80 1 32000 0 (Y) Y Y Y (Y) Y ns Y Y (Y) Y ns ns ns JOB PROCESSINGOPTION DEFAULT MAXIMUM LENGTH PROCESSINGTYPE DEFAULT MAXIMUM LENGTH QTY MINIMUM MAXIMUM DEFAULT REPRINT AUTO ON OFF RESOLUTION 300 600 1200 RET ON OFF LIGHT MEDIUM DARK SCAN MINIMUM MAXIMUM DEFAULT The information contained in this table is subject to change without notice. To ensure that the specific support information is correct, test these variable settings on your product. 38 Chapter 3 Product-specific features ENWW Table 9. PJL environmental variables for HP LaserJet products (continued) Environment variable STAPLEOPTION Variable values DEFAULT ONE TWO THREE FOUR FIVE SIX SEVEN ONEANGLED ONEOPPOSED OPTION3 OPTION4 OPTION5 OPTION6 CUSTOM NONE STRINGCODESET HPROMAN8 JISX02011976 ISO88592 ISO88599 ISO88595 UTF8 TESTPAGE ? SELFTEST PCLTYPELIST CONTSELFTEST DEMOPAGE ERRORREPORT SUPPLIESSTATUSREPORT 1150 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns (Y) Y Y Y Y Y Y Y ns 5 300 15 ns ns ns ns ns ns ns ns 1200 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns (Y) Y Y Y Y ns ns ns Y 5 300 15 Y (Y) Y Y ns ns ns ns 1300 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns (Y) Y Y Y Y Y Y Y Y 5 300 15 ns ns ns ns ns ns ns ns 2200 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns (Y) Y Y Y Y ns ns ns Y 5 300 15 Y Y (Y) Y Y (Y) Y Y 2300 series (Y) Y Y Y Y Y Y Y Y Y Y Y Y Y Y ns (Y) Y Y Y Y Y ns ns ns ns ns ns ns ns ns 5 300 15 ns ns ns ns ns ns ns ns DATASTORE PSTYPEFACELIST TIMEOUT MINIMUM MAXIMUM DEFAULT TRAY1TEMP LOW MEDIUM HIGH HIGH2 TRAY2TEMP LOW MEDIUM HIGH HIGH2 The information contained in this table is subject to change without notice. To ensure that the specific support information is correct, test these variable settings on your product. ENWW PJL environment variable support 39 Table 9. PJL environmental variables for HP LaserJet products (continued) Environment variable TRAY3TEMP Variable values LOW MEDIUM HIGH HIGH2 USERNAME WIDEA4 MAXIMUM LENGTH NO YES 1150 series ns ns ns ns ns (Y) Y 1200 series ns ns ns ns ns (Y) Y 1300 series ns ns ns ns ns (Y) Y 2200 series Y (Y) Y Y ns (Y) Y 2300 series ns ns ns ns 80 (Y) Y The information contained in this table is subject to change without notice. To ensure that the specific support information is correct, test these variable settings on your product. 40 Chapter 3 Product-specific features ENWW Table 10. PJL environmental variables for HP LaserJet products Environment variable AUTOCONT1 Variable values OFF ON BINDING LONGEDGE SHORTEDGE BITSPERPIXEL MINIMUM MAXIMUM DEFAULT CLEARABLEWARNINGS1 4100 series (Y) Y (Y) Y 1 2 2 (Y) Y 1 999 1 (Y) Y (Y) Y Y Y Y 1 5 3 (Y) Y (Y) Y (Y) Y ns ns ns ns (Y) Y Y 4100mfp series (Y) Y (Y) Y 1 2 2 (Y) Y 1 32000 32000 (Y) Y (Y) Y Y Y Y 1 5 3 (Y) Y (Y) Y (Y) Y ns ns ns ns (Y) Y Y 4200 series (Y) Y (Y) Y ns ns ns (Y) Y 1 32000 32000 (Y) Y (Y) Y Y Y Y 1 5 3 (Y) Y (Y) Y (Y) Y ns ns ns ns (Y) Y Y 4300 series (Y) Y (Y) Y ns ns ns (Y) Y 1 32000 32000 (Y) Y (Y) Y Y Y Y 1 5 3 (Y) Y (Y) Y (Y) Y ns ns ns ns (Y) Y Y JOB ON COPIES MINIMUM MAXIMUM DEFAULT COURIER REGULAR DARK CPLOCK2 OFF ON MINIMUM MODERATE MAXIMUM DENSITY1 MINIMUM MAXIMUM DEFAULT DISKLOCK2 OFF ON DUPLEX OFF ON ECONOMODE OFF ON EDGETOEDGE NO YES FIH OFF ON FINISH NONE STAPLE ON The information contained in this table is subject to change without notice. To ensure that the specific support information is correct, test these variable settings on your product. 1 When a SET or DEFAULT command is used with the AUTOCONT, CLEARABLEWARNINGS, or DENSITY variables, both the User Default and PJL Current Environment settings are modified (except for the LaserJet 4L, 5L, and 6L printers). It is recommended that these variables not be changed on a job-by-job basis. 2 Can be modified only by using the DEFAULT command. ENWW PJL environment variable support 41 Table 10. PJL environmental variables for HP LaserJet products (continued) Environment variable FINISHEROPTION Variable values MINIMUM MAXIMUM DEFAULT FINISHERTYPE MINIMUM MAXIMUM DEFAULT FORMLINES MINIMUM MAXIMUM DEFAULT HELDJOBTIMEOUT DISABLED ONEHOUR FOURHOURS ONEDAY ONEWEEK HOLD OFF ON PROOF STORE HOLDKEY DEFAULT MAXIMUM LENGTH HOLDTYPE PUBLIC PRIVATE HOSTCLEANINGPAGE 4100 series 0 255 0 0 255 0 5 128 60 (Y) Y Y Y Y (Y) Y Y Y "" 4 (Y) Y ns ns 4100mfp series 0 255 0 0 255 0 5 128 60 (Y) Y Y Y Y (Y) Y Y Y "" 4 (Y) Y ns ns 4200 series 0 255 0 0 255 0 5 128 60 (Y) Y Y Y Y (Y) Y Y Y "" 4 (Y) Y ns ns 4300 series 0 255 0 0 255 0 5 128 60 (Y) Y Y Y Y (Y) Y Y Y "" 4 (Y) Y ns ns OFF ON The information contained in this table is subject to change without notice. To ensure that the specific support information is correct, test these variable settings on your product. 42 Chapter 3 Product-specific features ENWW Table 10. PJL environmental variables for HP LaserJet products (continued) Environment variable INTRAY1SIZE Variable values LETTER LEGAL A4 EXECUTIVE LEDGER A3 COM10 MONARCH C5 DL JISB4 JISB5 B5 CUSTOM JPOSTD A5 ROC8K ROC16K JISEXEC LETTERROTATED ANYCUSTOM A4ROTATED ISOB5 ANY EIGHTPOINT5X13 4100 series (Y) Y Y Y ns ns Y Y Y Y ns Y Y Y ns Y ns Y Y ns ns ns Y ns ns 4100mfp series (Y) Y Y Y ns ns Y Y Y Y ns Y Y Y ns Y ns Y Y ns ns ns Y ns ns 4200 series Y Y Y Y ns ns Y Y Y Y ns Y Y Y Y Y ns Y Y ns Y ns Y (Y) ns 4300 series Y Y Y Y ns ns Y Y Y Y ns Y Y Y Y Y ns Y Y ns Y ns Y (Y) ns The information contained in this table is subject to change without notice. To ensure that the specific support information is correct, test these variable settings on your product. ENWW PJL environment variable support 43 Table 10. PJL environmental variables for HP LaserJet products (continued) Environment variable INTRAY2SIZE Variable values LETTER LEGAL A4 EXECUTIVE LEDGER A3 COM10 MONARCH C5 DL JISB4 JISB5 B5 CUSTOM JPOSTD A5 ROC8K ROC16K JISEXEC LETTERROTATED ANYCUSTOM A4ROTATED ISOB5 ANY EIGHTPOINT5X13 4100 series (Y) Y Y Y ns ns ns ns ns ns ns Y ns Y ns Y ns ns ns ns ns ns ns ns ns 4100mfp series (Y) Y Y Y ns ns ns ns ns ns ns Y ns Y ns Y ns ns ns ns ns ns ns ns ns 4200 series (Y) Y Y Y ns ns ns ns ns ns ns Y ns Y ns Y ns Y Y ns Y ns Y Y ns 4300 series (Y) Y Y Y ns ns ns ns ns ns ns Y ns Y ns Y ns Y Y ns Y ns Y Y ns The information contained in this table is subject to change without notice. To ensure that the specific support information is correct, test these variable settings on your product. 44 Chapter 3 Product-specific features ENWW Table 10. PJL environmental variables for HP LaserJet products (continued) Environment variable INTRAY3SIZE Variable values LETTER LEGAL A4 EXECUTIVE LEDGER A3 COM10 MONARCH C5 DL JISB4 JISB5 B5 CUSTOM JPOSTD A5 ROC8K ROC16K JISEXEC LETTERROTATED ANYCUSTOM A4ROTATED ISOB5 ANY EIGHTPOINT5X13 4100 series (Y) Y Y Y ns ns ns ns ns ns ns Y ns Y ns Y ns ns ns ns ns ns ns ns ns 4100mfp series (Y) Y Y Y ns ns ns ns ns ns ns Y ns Y ns Y ns ns ns ns ns ns ns ns ns 4200 series (Y) Y Y Y ns ns ns ns ns ns ns Y ns Y ns Y ns Y Y ns Y ns Y Y ns 4300 series (Y) Y Y Y ns ns ns ns ns ns ns Y ns Y ns Y ns Y Y ns Y ns Y Y ns The information contained in this table is subject to change without notice. To ensure that the specific support information is correct, test these variable settings on your product. ENWW PJL environment variable support 45 Table 10. PJL environmental variables for HP LaserJet products (continued) Environment variable INTRAY4SIZE Variable values LETTER LEGAL A4 EXECUTIVE LEDGER A3 COM10 MONARCH C5 DL JISB4 JISB5 B5 CUSTOM JPOSTD A5 ROC8K ROC16K JISEXEC LETTERROTATED ANYCUSTOM A4ROTATED ISOB5 ANY EIGHTPOINT5X13 4100 series ns ns ns ns ns ns (Y) Y Y Y ns ns Y ns ns ns ns ns ns ns ns ns ns ns ns 4100mfp series ns ns ns ns ns ns (Y) Y Y Y ns ns Y ns ns ns ns ns ns ns ns ns ns ns ns 4200 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns 4300 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns The information contained in this table is subject to change without notice. To ensure that the specific support information is correct, test these variable settings on your product. 46 Chapter 3 Product-specific features ENWW Table 10. PJL environmental variables for HP LaserJet products (continued) Environment variable INTRAY5SIZE Variable values LETTER LEGAL A4 EXECUTIVE LEDGER A3 COM10 MONARCH C5 DL JISB4 JISB5 B5 CUSTOM JPOSTD A5 ROC8K ROC16K JISEXEC LETTERROTATED ANYCUSTOM A4ROTATED ISOB5 ANY EIGHTPOINT5X13 INTRAY6SIZE INTRAY7SIZE INTRAY8SIZE JOBATTR Tray-dependent Tray-dependent Tray-dependent "attribute string" MAXIMUM LENGTH JOBID OFF ON JOBNAME "jobname string" MAXIMUM LENGTH JOBOFFSET OFF ON 4100 series (Y) Y Y Y ns ns ns ns ns ns ns Y ns Y ns Y ns ns ns ns ns ns ns ns ns ns ns ns "" 80 Y (Y) "" 80 (Y) Y 4100mfp series (Y) Y Y Y ns ns ns ns ns ns ns Y ns Y ns Y ns ns ns ns ns ns ns ns ns ns ns ns "" 80 Y (Y) "" 80 (Y) Y 4200 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns "" 80 (Y) Y "" 80 (Y) Y 4300 series ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns "" 80 (Y) Y "" 80 (Y) Y The information contained in this table is subject to change without notice. To ensure that the specific support information is correct, test these variable settings on your product. ENWW PJL environment variable support 47 Table 10. PJL environmental variables for HP LaserJet products (continued) Environment variable LANG Variable values DANISH GERMAN ENGLISH SPANISH FRENCH ITALIAN DUTCH NORWEGIAN POLISH PORTUGUESE FINNISH SWEDISH TURKISH JAPANESE CZECH HUNGARIAN RUSSIAN TRADITIONALCHINESE 4100 series Y Y (Y) Y Y Y Y Y Y Y Y Y Y Y Y Y Y ns ns ns ns ns ns ns Y (Y) 0 89 0 (Y) Y Y Y Y Y Y 0.44 99.99 10.00