Easily Add Storage Space to Your Network files can be easily downloaded via your web browser. Your files can be available publicly, or create password-protected accounts for authorized users. Installation of the Network Storage Link is simple -- just plug it directly into your 10/100 Ethernet network, and attach your USB 2.0 hard drives or flash disk. It can self-configure to your network via DHCP or you can use the built-in utility to manually configure it. With the speedy USB 2.0 interface, you'll get quick response times with even your largest files. The Network Storage Link features built-in disk utilities, accessible through your web browser. You can format new disk drives, and scan drives for errors. The built-in backup program lets you schedule full, incremental, or synchronization backups of your network drives to the Network Storage Link, or vice versa. It will even send you an email message when a hard drive gets nearly full, completely full, or has an error. The Network Storage Link is a fast, simple, flexible and economical way to add storage to your network. Integrated file server -- access your files from the Internet Built-in disk utilities -- format, backup, and scandisk Now you can quickly and easily add gigabytes of storage space onto your network with the Network Storage Link from Linksys. This tiny network appliance connects USB 2.0 hard drives directly to your Ethernet network. You can connect up to two stand-alone USB disk drives of any size, and access them from anywhere on your network. You can even plug a USB flash disk into the Network Storage Link, for a convenient way of accessing your portable data files. The Network Storage Link can also be set up so that your storage devices are accessible from the Internet -- Connects USB 1.1 or 2.0 disk drives and flash disks directly to your network Share music, video, or data files with managed access by user name or group Network Storage Link WIRED for USB 2.0 Disk Drives Product Data Model No. NSLU2 Network Storage Link for USB 2.0 Disk Drives Features · Quickly add your USB 2.0 storage devices to your network · Built-in 10/100 Fast Ethernet port for throughput up to 200Mbps · Simple Web-based user interface for fast configuration from anywhere on the network Specifications Model Standards Ports Buttons Cabling Type LEDs UPnP able/cert NSLU2 USB 1.0/1.1/2.0, IEEE 802.3, IEEE 802.3u 1 10/100 RJ-45 Ethernet port, 2 USB 2.0 ports Power, Reset Category 5 Ethernet Cable Status, Ethernet, USB1,USB2 Yes Environmental Dimensions Unit Weight Power Input Certifications Operating Temp. Storage Temp. Operating Humidity Storage Humidity 130 mm x 21 mm x 91 mm (5.12" x 0.81" x 3.56") 5.50 oz. (0.156 kg) External, 5VDC/2A FCC, CE 41ºF to 104ºF (5ºC to 40ºC) 14ºF to 140ºF (-10ºC to 60ºC) 10% to 80%, Non-Condensing 5% to 90%, Non-Condensing Linksys A Division of Cisco Systems, Inc. 18582 Teller Avenue Irvine, CA 92612 USA E-mail: Web: sales@linksys.com support@linksys.com http://www.linksys.com Minimum Requirements · USB 1.0/1.1/2.0 Flash Memory Disk · USB 1.0/1.1/2.0 External Disk Drive Package Contents · One NSLU2 - Network Storage Link for USB 2.0 Disk Drives · One Power Adapter · One 6 ft Ethernet Cable · One Setup Wizard CD with User Guide in PDF format · One Registration Card · One Device Stand Linksys products are available in more than 50 countries, supported by 12 Linksys Regional Offices throughout the world. For a complete list of local Linksys Sales and Technical Support contacts, visit our Worldwide Web Site at www.linksys.com. Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2004 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders. NSLU2-DS-40512NC-BW Product Data Model No. NSLU2 ...