User manual LINKSYS WAP4400N - PRODUCT BROCHURE

High-Speed Wireless Access for Existing Networks! With the growth in high bandwidth applications, such as storage and video in the work place, network performance is essential. Wireless technology is no longer lagging behind wired performance. The introduction of the Linksys Business Series WAP4400N Wireless-N Access Point answers the growing business' need for access, speed, and security. The Access Point uses the very latest wireless networking technology, Wireless-N (draft 802.11n). By overlaying the signals of multiple radios, Wireless-N's "Multiple In, Multiple Out" (MIMO) technology multiplies the effective data rate. Unlike ordinary wireless networking technologies that are confused by signal reflections, MIMO actually uses these reflections to increase the range and reduce "dead spots" in the wireless coverage area. The Linksys Wireless-N Access Point lets you connect Wireless-N (802.11n), Wireless-G (802.11g) or Wireless-B (802.11b) devices to your wired network so you can add PCs to the network with no cabling hassle. Power over Ethernet (PoE) support makes the Access Point easy to install -- you can mount the Access Point anywhere, even without ready access to a power plug. With appropriate PoE support at the other end, you only need to run one cable to the Access Point to deliver both data and power. Of course, you can also use the included AC adapter if your installation point has power available nearby. Moreover, the integrated Quality of Service (QoS) features provide consistent voice and video quality on both the wired and wireless networks, enabling the deployment of business quality VoIP and video applications. To protect your data and privacy, the Linksys Wireless-N Access Point supports both Wired Equivalent Privacy (WEP) and the industrial-strength wireless security of Wi-Fi Protected AccessTM (WPA), encoding all your wireless transmissions with powerful encryption. With the MAC address filter with advanced logging feature, you both control and stay apprised of who accesses your wireless network. Configuration is a snap with the web browser-based configuration utility. The Linksys Wireless-N Access Point with Power Over Ethernet is the best way to add wireless access to your existing business network. Complies with IEEE draft 802.11n standards while at the same time being backwards compatible with 802.11b and g devices Standards-based POE (IEEE 802.3af ) or External DC power MIMO technology uses multiple radios to create a robust signal that travels farther and reduces dead spots Support for WMM provides improved QoS over wireless connections for better video and voice performance WAP4400N PRODUCT DATA Wireless-N Access Point with Power Over Ethernet Model: WAP4400N BUSINESS SERIES Features · Draft 802.11n wireless networking delivers greater throughput and extended range, maximizing the number of wireless clients per access point for your small business · Full backwards compatibility for 802.11b and 802.11g · Easy installation and configuration web interface · Supports WEP, WPA-PSK, WPA2-PSK, WPA2-ENT, WPA-ENT authentication (802.11i ready) · Adjustable dipole antennas with MIMO 2x3 diversity · Gigabit Ethernet LAN interface · Supports Power over Ethernet (PoE) or external DC power · Supports SNMP and intuitive web-based interface · WMM wireless QoS support - upgradeable to 802.11e Access Point with Power Over Ethernet Specifications Model Standards Ports Buttons Cabling Type LEDs Operating System WAP4400N Draft IEEE802.11n, IEEE802.11g, IEEE802.11b, IEEE802.3, IEEE802.3u, IEEE802.3af (Power over Ethernet), 802.1x (Security Authentication), 802.11i - Ready (Security WPA2), 802.11e - Ready (Wireless QoS) Ethernet, Power Reset UTP CAT 5 Power, Ethernet, Wireless, POE Linux Built in Web UI for easy browser-based configuration (HTTP/HTTPS) SNMP Version 1, 2c, 3 Event Logging Remote Syslog Firmware upgradeable through web-browser Diags: Flash, RAM, LAN, WLAN DHCP Client Access Point Mode Radio and Modulation Type: 802.11b/DSSS, 11g/OFDM, 11n/OFDM Operating Channels: 11 North America, 13 Most of Europe (ETSI and Japan) None 3 (Omni-Directional) Transmit Power (Adjustable) at Normal Temp Range: 11b - 16 dBm at 1TX, 19 dBm at 2TX; 11g - 13 dBm at 1TX, 16 dBm at 2TX; 11n - 13 dBm at 1TX, 16 dBm at 2TX 2 11.n: 300Mbps at -69dbM, 11.g: 54Mbps at -73dBm, 11.b: 11Mbps at -88dBM WEP 64bit/128bit, WPA-PSK, WPA2-PSK, WPA-ENT, WPA2-ENT Wireless connection control: MAC-based SSID Broadcast enable/disable IEEE 802.1X support 4 queues WMM Wireless priority Load Balancing New AP detection (used with WPC4400N) New client detection (used with WPC4400N) Auto-channel selection Setup/Config WebUI Management SNMP Version Event Logging Web F/W upgrade Diags: Flash, etc. DHCP Operating Modes Access Point Wireless Spec/Modulation Channels # of Internal Ant. # of External Ant. Transmit Power Antenna Gain in dBi Receiver Sensitivity Security WEP/WPA/WPA2 Access Control SSID Broadcast 802.1X Quality of Service QoS PRODUCT DATA General BUSINESS SERIES Environmental Dimensions WxHxD Unit Weight Power Certification Operating Temperature Storage Temperature Operating Humidity Storage Humidity 7.80" x 5.16" x 7.80" (198 x 131 x 198 mm) 0.84 lb (38 g) 12V 1A DC input, and IEEE802.3af Compliant PoE FCC, CE, IC 32 to 104ºF (0 to 40ºC) -20 to 70ºC 10% to 85% non-condensing 5% to 90% non-condensing Package Contents · · · · · · Wireless-N Access Point with PoE User Guide on CD-ROM Ethernet Network Cable Power Adapter Product Stands Registration Card Minimum Requirements · 802.11b, 802.11g, 802.11n Wireless Adapter With TCP/IP Protocol Installed Per PC · Switch/Router with Power Over Ethernet (PoE) Support Or PoE Injector when used with POE · Web-Based Configuration Java-Enabled Web Browser Linksys A Division of Cisco Systems, Inc. 121 Theory Irvine, CA 92617 USA E-mail: sales@linksys.com support@linksys.com Web: http://www.linksys.com Linksys products are available in more than 50 countries, supported by 12 Linksys Regional Offices throughout the world. For a complete list of local Linksys Sales and Technical Support contacts, visit our Worldwide Web Site at www.linksys.com. PRODUCT DATA BUSINESS SERIES Check the product package and contents for specific features supported. Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2006 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders. Model: WAP4400N WAP4400N-DS-60719NC-SW