User manual NOKIA N81 8GB - PTT GUIDE IN ENGLISH

Push to talk 1.5 © 2007 Nokia. All rights reserved. Nokia, Nokia Connecting People, and Nseries are trademarks or registered trademarks of Nokia Corporation. Other product and company names mentioned herein may be trademarks or tradenames of their respective owners. Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED `AS IS'. EXCEPT AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE. The availability of particular products and applications and services for these products may vary by region. Please check with your Nokia dealer for details, and availability of language options. Some operations and features are SIM card and/or network dependent, MMS dependent, or dependent on the compatibility of devices and the content formats supported. Some services are subject to a separate charge. Refer to the user guide for other important information about your device. ISSUE 1 EN Push to talk (PTT) (network service) is a real-time voice over IP service implemented over a GSM/GPRS network. PTT provides direct voice communication connected with the push of a key. Use PTT to have a conversation with one person or with a group of people. Before you can use PTT, you must define the PTT access point and PTT settings. You may receive the settings in a special text message from the service provider that offers the PTT service. You can also use the settings wizard application for configuration, if supported by your service provider. For more information on the application, see the guides for your device at www.nokia.com/support or your local Nokia website. In PTT communication, one person talks while the others listen through the built-in loudspeaker. Speakers take turns responding to each other. Because only one group member can talk at any time, the maximum duration of a speech turn is limited. The maximum duration is usually set to 30 seconds. For details of the speech turn duration for your network, contact your service provider. Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely loud. Phone calls always take priority over push to talk activities. Define a PTT access point Many service providers require you to use an internet access point (IAP) for your default access point. Other service providers allow you to use a WAP access point. Contact your service provider for more information. If you do not have a WAP connection, you may need to contact your service provider for assistance with the first-time connection or visit www.nokia.com/phonesettings. PTT settings Select Options > PTT settings. Select User settings, and enter the following information: Accepted list calls--Select Notify if you want to see a notification of incoming calls. Select Auto-accept if you want PTT calls to be answered automatically. Select Not allowed if you want PTT calls to be rejected automatically. Push to talk 3 Push to talk Push to talk PTT call alert tone--Select Set by profile if you want the incoming call alert setting for PTT to be the same as the incoming call alert tone defined in the prevailing active profile. Callback request tone--Select a tone for callback requests. Application start-up--Select if you want to log in to the PTT service when you switch on your device. Default nickname--Enter your default nickname that is displayed to other users. Your service provider may have disabled the editing of this option in your device. Show my PTT address--Select In 1 to 1 calls, In group calls, In all calls, or Never. Your service provider may have disabled some of these options in your device. Show my login status--Select Yes if you want your status to be shown or No if you want your status to be hidden. Select Connection settings, and enter the following information: Domain--Enter the domain name obtained from your service provider. Access point name--Enter the PTT access point name. The access point name is needed to establish a connection to the GSM/GPRS network. Server address--Enter the IP address or domain name of the PTT server obtained from your service provider. User name--Enter your user name obtained from your service provider. PTT password--Enter a password, if required, to make a data connection. The password is usually provided by the service provider and is often case-sensitive. Log in to PTT PTT automatically logs in to the service when started. When log in is successful, PTT automatically connects to channels that were active when the application was last closed. If the connection is lost, the device automatically tries to log back in until you choose to exit PTT. Exit PTT Select Options > Exit. Log out from PTT after exiting application? is displayed. Press Yes to log out and close the service. Press No if you want to keep the application active on the background. If several applications are open and you want to switch from one application to another, press and hold the menu key. 4 Select Options > Contacts. Select the contact you want to talk to from the list and select Options > Talk 1 to 1. Press and hold the call key the entire time you are talking. When you have finished talking, release the call key. To talk to the contact, press and hold the call key also in other views in the Push to talk application, for example, the contacts view. To make a new phone call, first end the one-to-one call. Select Disconnect or press . Tip! Remember to hold the device in front of you during a PTT call so you can see the display. Speak towards the microphone, and do not cover the loudspeaker with your hands. To call a group, select Options > Contacts, mark the contacts you want to call, and select Options > Talk to many. Subscribe to login status of others To subscribe or unsubscribe to the PTT login status of others, select Options > Contacts, select the contact, select Options > Show login status or Hide login status. Send a callback request In Contacts, scroll to the desired name, and select Options > Send callback request. Answer a one-to-one call Press the call key to start a one-to-one call or the end key to dismiss the call. Tip! You can make a one-to-one or group call also from contacts. Select Options > PTT > Talk 1 to 1 or Talk to many. Respond to a callback request When someone sends you a callback request, 1 new callback request is displayed in standby mode. Press Show to open Callback inbox. Select a contact and Options > Talk 1 to 1 to start a one-to-one call. Push to talk 5 Make a one-to-one call Make a group call Push to talk Channels You can join public preconfigured channels. Public channels are open to anyone who knows the URL for the channel. When you are connected to a channel and talk, all members joined to the channel hear you talking. Up to five channels can be active at the same time. When more than one channel is active, select Swap to change the channel you want to talk to. Select Options > PTT channels. To connect to a public preconfigured channel for the first time, select Options > New channel > Add existing. When you join a preconfigured channel, you must fill in an URL for the channel. For each channel, define: Channel name, Channel privacy, Nickname, and Thumbnail (optional). When you have successfully created a channel, you are asked if you want to send channel invitations. Channel invitations are text messages. Talking to a channel To talk to a channel after you log in to the PTT service, press the call key. You hear a tone indicating that access is granted. Continue to press and hold the call key the entire time you are talking. When you finish talking, release the call key. If you try to respond to a channel by pressing the call key while another member is talking, Wait is displayed. Release the call key, wait for the other person to finish talking, and press the call key again when the speaker has finished. Alternatively, keep the call key pressed and wait for Talk to be displayed. When you are talking in a channel, the first person to press the call key when someone stops talking talks next. When you have finished the PTT call, select Disconnect or press . To view currently active members of a channel when you have an active call to the channel, select Options > Active members. Create your own channels To create a new preconfigured channel select Options > New channel > Create new. You can create your own public channels, choose your own channel name, and invite members. Those members can invite more members to the public channel. You may also set up private channels. Only users invited by the host are allowed to join and use private channels. 6 Respond to a channel invitation To save a received channel invitation, select Options > Save channel. The channel is added to your PTT contacts, channels view. After you save the channel invitation, you are asked if you want to connect to the channel. Select Yes to open the PTT sessions view. Your device logs in to the service, if you are not logged in already. If you reject or clear the invitation, the invitation is stored in your messaging inbox. To join the channel later, open the invitation message, and save the invitation. Select Yes from the dialog to connect to the channel. View the PTT log Select Options > PTT log. The log contains the following folders: Missed PTT, Received PTT, and Created PTT. Push to talk 7 You can also invite new members to a channel when you are connected to it, select Options > Send invitation to open the invitation view. You can only invite new members when you are the host of a private channel, or when the channel is a public channel. Channel invitations are text messages. To initiate a one-to-one call from PTT log, press the call key.