User manual D-LINK DES-6000 - Product Support Bulletin

How to Update the Firmware Update the PROM code: Modify the configure file (25.cfg) for PROM code updating Specify the directory path and image file name for PROM code. Code_type=PROM Image_file="d:\des6000\6000prom.b13" #Code_type=RUNTIME #Image_file="d:\switch\des6000\des6000.b41" #Code_type=CONFIG #Image_file="g:\d-link\des-60~1\basic_25.bc" Save your modification and Enable your TFTP server. Enter console program; select Update Firmware and Configuration Files in the main menu. Set the Software Update Mode to "Network". Specify the IP address of your TFTP server. In the Configuration File field, Set Use Config Files to "Enable" In File Name field, specify the path and file name of config file. The following screen appears: Written by: Simon Hsu Dept. Technical Support Updated: March 23, 2001 Press RESET SWITCH TO START UPDATE to initiate the update sequence. Restart the switch. Check the version of PROM code. is it the correct version you want to update? Update the Runtime code: Modify the configure file (25.cfg) for RunTime code updating Specify the directory path and image file name for RunTime code. #Code_type=PROM #Image_file="d:\des6000\6000prom.b13" Code_type=RUNTIME Image_file="d:\des6000\6000run.b41" #Code_type=CONFIG #Image_file="g:\d-link\des-60~1\basic_25.bc" Save your modification and Enable your TFTP server. Enter console program; select Update Firmware and Configuration Files in the main menu. Set the Software Update Mode to "Network". Specify the IP address of your TFTP server. In the Configuration File field, Set Use Config Files to "Enable" In File Name field, specify the path and file name of config file. The following screen appears: Written by: Simon Hsu Dept. Technical Support Updated: March 23, 2001 Press RESET SWITCH TO START UPDATE to initiate the update sequence. Restart the switch. Check the version of PROM code. is it the correct version you want to update? Written by: Simon Hsu Dept. Technical Support Updated: March 23, 2001