Connecting to the External Devices ENG Rear of the TV (Input/Output) VCR Decoder / Video game device Video disc player or Satellite receiver or This end can be fitted with: This end can be fitted with: Three RCA connectors (VIDEO + AUDIO-L and R) A SCART connector Three RCA connectors (VIDEO + AUDIO-L and R) An S-Video connector and two audio RCA connectors (L+R) If you have a second VCR and wish to copy cassettes tape, connect the source VCR to "IN 1" and the target VCR to "OUT" so that you can redirect the signal from source VCR to target VCR. If you have a decoder, connect the decoder to the VCR and the VCR to the television. "OUT" is used for displaying the current picture to an external device. When you wish to record the current picture, connect the VCR to "OUT". Side of the TV (depending on the model) (Input) Camcorder Video disc player Front of the TV (Input) Video game device 1 BP68-00288A (J59A_ENG_Asia) 4/7/04 8:23 AM Page 58 Connecting to the Audio Output ENG The AUDIO OUT RCA connectors are used for equipment, such as an audio system (to take full advantage of the Surround sound effect). Rear of the TV Audio system 2 BP68-00288A (J59A_ENG_Asia) 4/7/04 8:23 AM Page 59 Connecting to the S-Video Input The actual configuration on your TV may be different, depending on your model. ENG The S-VIDEO INPUT and RCA (AUDIO3-L and R) connectors are used for equipment with an S-Video output, such as a camcorder or VCR. Side of the TV (depending on the model) Camcorder and Front of the TV VCR and To play pictures and sound, both the S-VIDEO INPUT and RCA connectors must be used. Connecting to the Component Input Rear of the TV DVD DTV receiver The COMPONENT IN connectors are used for equipment with a DVD or DTV receiver output. (480i, 480p, 576i,576p, 1080i) 3 ...