Connecting to the External Input/Outputs ENG EXT1 is used for the equipment with an RGB output, such as video game devices or video disc players. Rear of the TV or VCR DVD or Decoder / Video game device This end can be fitted with: Video disc player A SCART connector An S-Video connector and two audio RCA connectors (L+R); EXT 2 Three RCA connectors (VIDEO + AUDIO-L and R) Satellite receiver source VCR to EXT1 and the target VCR to EXT2 so that you can redirect the signal from EXT1 to EXT2. the television. If you have a second VCR and wish to copy cassette tape, connect the If you have a decoder, connect the decoder to the VCR and the VCR to When you wish to record a programme, connect the receiver to EXT1 and the VCR to EXT2 so that you can redirect the signal from EXT1 to EXT2. Whenever you connect an audio or video system to your television, ensure that all elements are switched off. Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions. 1 Connecting to the Audio Output ENG The RCA (AUDIO OUT-L and R) connectors are used for equipment, such as an audio system (to take full advantage of the Surround sound effect). Rear of the TV Audio system Connecting to the RCA Input The RCA (VIDEO + AUDIO-L and R) connectors are used for the equipment, such as camcorders, video disc players, and some video game devices. Side of the TV (depending on the model) Camcorder Video game device Video disc player 2 Connecting to the S-Video Input ENG The S-VIDEO INPUT and RCA (AUDIO-L and R) connectors are used for equipment with an S-Video output, such as a camcorder or VCR. Side of the TV (depending on the model) Camcorder and VCR To play pictures and sound, both the S-VIDEO INPUT and RCA connectors must be used. Connecting to the Component Input Rear of the TV DVD DTV receiver The COMPONENT IN connectors are used for equipment with a DVD or DTV receiver output. (480i, 480p, 576i,576p, 1080i) 3 ...