Quick Guide to the Sekonic L-718 5° SPOT ATTACHMENT (accessory) REFLECTEDLIGHT FILTER 1/10 STOP INCREMENTS LUMIDISC (uni-directional) LUMISPHERE (omni-directional) DUAL-AXIS PIVOT HEAD ANALOG MEMORY SCALE ON/OFF BATTERY CHECK ISO DEPRESS WHILE PUSHING UP OR DOWN SWITCH MEMORY (SEE INSTRUCTIONS) MEASURE UP DOWN MODE FLASH FLASH W/CORD DAYLIGHT MEMORY OFF (SEE INSTRUCTIONS) DISPLAY LIGHT F/T WINDOW IN DAYLIGHT MODE DISPLAYS SHUTTER PRIORITY ON STARTUP. PRESS F/T TO TOGGLE AND BETWEEN APERTURE SHUTTER PRIORITY MULTI IN FLASH MODES TOGGLES MULTI ON/OFF F/EV TOGGLES BETWEEN EV AND SHUTTER/APERTURE READING FLASH CORD SOCKET WHEN CORD IS ATTACHED PUSH MEASURE BUTTON TO TRIGGER FLASH AND MEASURE LIGHT Basic Operation - Sekonic L-718 On/Off/Battery Check Slide On/Off switch up. To check battery power hold down button. Battery strength is indicated briefly in 1/10th steps. Set ISO Hold down ISO button while depressing Up or Down button Use as Reflected Meter Attach Lumigrid or 5° Spot Attachment to Dual Axis Pivot Head Use as Incident Meter Attach Lumisphere to Dual Axis Pivot Head Measure Brightness /Contrast Difference Attach flat Lumidisc to Dual Axis Pivot Head Daylight Reading Select Daylight Mode, depress Measure button Cordless Flash Reading Select Flash Mode, depress Measure button, manually trigger flash Flash Reading Using Flash Cord Select Flash with Cord Mode, insert flash cord, depress Measure button EV Reading Select Daylight Mode, depress F/EV Button to see EV Select Shutter or Aperture Priority Select Daylight Mode. Toggle F/T button. Analog scale is shown in Shutter Priority mode Multi Flash Reading in either flash mode, select Multi to read up to 9 consecutive flashes Display Light Press Display Light (D.L.) button at any time to illuminate readouts Dual Axis Pivot Head Pivot Receptor Head in any direction for easiest reading of display and best positioning of receptor PRINTED IN USA ...