Quick Installation Guide Connecting your USB Instant DVD for USB Instant DVD Audio/Video Capture Follow these directions when using USB Instant DVD for the first time Instructions for initial installation (optional) Walk up connectors for easily connecting any video source for video capture 1) Insert the USB Instant DVD CD 2) Connect the USB Instant DVD unit to your computer 3) Follow the on screen instructions to install the new hardware 4) Install the software after the hardware has been successfully installed B D Power source D C Back of your computer Video Source (VCR, DVD player, Camcorder, etc...) L/R Audio Out Video Out USBPort E Line In Your Computer's soundcard (Refer to the USBInstant DVDmanual for more detailed instructions) Cables E B F C D G This Quick Installation Guide should be used as a reference guide only. It is highly recommended that you read the complete USB Instant DVD Manual before using this product to help ensure you get the most out of your USB Instant DVD! Connecting your USB Instant DVD for Audio/Video Output B Power source C Back of your computer Video Playback Device (TV, VCR, Camcorder, etc...) G Video In USBPort L/R Audio In F Line Out Optional Speaker jack - Audio Line out or speaker (Refer to the USBInstant DVD manual for more detailed instructions) Cables E B F C D G ...