User manual LINKSYS PAP2T - QUICK INSTALLATION

® A Division of Cisco Systems, Inc. If you already have an account set up with your Internet phone service provider, then proceed to Step 1. If you do not have an account set up, then go to the website of your Internet phone service provider and sign up for service. After you have set up an account, proceed to Step 1. C D Using a telephone cable, connect your telephone to the PHONE 1 port of the Internet Phone Adapter. If you have a second Internet phone service account, then connect another telephone or a fax machine to the PHONE 2 port of the Internet Phone Adapter. The Power, Ethernet, and Phone LEDs will be solidly lit when the Internet Phone Adapter is ready for use. Follow the instructions provided by your Internet phone service provider. For additional information or troubleshooting help, refer to the User Guide on the CD-ROM. You can also call or e-mail for further support. E-mail Support support@linksys.com Website http://www.linksys.com or http://www.linksys.com/support FTP Site ftp://ftp.linksys.com Sales Information 800-546-5797 (800-LINKSYS) C 1 Connect the Internet Phone Adapter E F Step 1 explains how to connect the Internet Phone Adapter to your network and telephones or fax machines. Shown below is a connection diagram displaying a typical setup with one Internet phone line. Internet Cable/DSL Modem Router Internet Phone Adapter Telephone Package Contents · · · · Internet Phone Adapter with 2 Ports for Voice-over-IP Power Adapter Network Cable Quick Installation The installation of the Internet Phone Adapter is complete. You may pick up the phone and make calls. NOTE: For information about your Internet phone service, refer to the materials supplied by your Internet phone service provider. A Connect the included Ethernet network cable to the ETHERNET port of the Internet Phone Adapter. Connect the other end to one of your router's Ethernet ports. A Internet Phone Adapter with 2 Ports for Voice-over-IP Quick Installation Voice Model No. Model No. PAP2T B Connect the included power adapter to the POWER port of the Internet Phone Adapter. Connect the other end to an electrical outlet. B Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2005 Cisco Systems, Inc. All rights reserved. PAP2T-QI-60420NC LH