User manual NORTEL M3901 - QUICK REFERENCE CARD

Introducing your Meridian M3901 Telephone Feature Activation Indicator Feature Fx Goodbye One Line (DN) Message Waiting and Call Status Indicator Hold Meridian Digital Telephones M3901 Quick Reference Card Volume Control Bar Feature Card Features Assigned to Your Telephone / ¤ < > fi Flexible Feature Codes (FFCs) Call Forward All Calls Activate Park Call Pickup Ringing Number Pickup Directory Number Electronic Lock Activate Make Set Busy Activate Malicious Call Trace Ring Again Activate Speed Call User Call Forward All Calls Deactivate Park Call Access Pickup Group Group Call Electronic Lock Deactivate Make Set Busy Deactivate Override Ring Again Deactivate System Speed Call User P0942072 Standard Issue 1.00 Feature Operation Note 1: Features must be enabled by your network administrator. You only have access to the five features or Auto Dial positions that appear on the feature card of your telephone. Note 2: When activating features or programming Auto Dial Keys, you have 30 seconds to complete the key sequence or the process ends. Auto Dial store use Hold place a call on hold return to a held call Transfer transfer a call Conference create a conference correct an error or receive busy tone Last Number Redial Ring Again activate when notified cancel Speed Call store use Volume Control ringing handset Deactivate all active features Fx Fx Fx Fx Fx Fx Fx Fx Fx Explanations Legend Lift the handset, or press Replace handset, or press Dial a number. Press the Line Key. Press the Hold Key. Press the Goodbye Key. Fx to receive dialtone. to end the call. Press the Feature Key. Press the left side of the Volume Control Bar to lower the volume. Press the right side to increase the volume. A B Fx A A On (steady light) Wink (slow flash) Flash Off Fx Message Waiting and Call Status Indicator A message is waiting. An incoming call is ringing. A call is on hold. There is no message waiting, no call on hold, and no incoming call. One or more features are active. A feature is being programmed and input is required. Press the Dial Pad Key (/ - fi) that corresponds to Auto Dial or Feature number on your feature card Use the Dial Pad to enter the number (maximum of 31 characters). Be sure to include any required access codes. Dial the number to which you want to Transfer the call. Dial the number of the party that you want to add to the Conference. You may repeat this process to add up to six people to a Conference Call. Dial the 1 to 3 digit Speed Call code (ask your network administrator if you are unsure about the number of digits used on your network) followed by the telephone number that the code represents (maximum of 31 digits). Be sure to include any required access codes. Dial the 1 to 3 digit Speed Call code. A C A On (steady light) Feature Activation Indicator Flash A D Fx A Remarks A B A A A D A E Fx Fx C A A F E (while the telephone is ringing) (while on a telephone call) £ F For information on using your M3901 telephone when connected to a Meridian SL-100 system, please consult the Meridian Digital Telephones M3901, M3902, M3903, M3904 User Guide. For additional information on the operation of your telephone, please consult the Meridian Digital Telephones M3901, M3902, M3903, M3904 User Guide.