User manual RAYMARINE ST40 BIDATA - QUICK REFERENCE CARD

Distributed by Any reference to Raytheon or RTN in this manual should be interpreted as Raymarine. The names Raytheon and RTN are owned by the Raytheon Company. ST40 Bidata Instrument - quick reference guide Normal operation SWITCH ON SPEED Last permanent screen is displayed DEPTH Depth Notes: * denotes temporary screens which will time-out to the previous permanent screen after 5 seconds. On repeater instruments, only the Speed, Water temperature, Depth and Minimum depth screens are available. Alarm on/off Shallow alarm 3 seconds Current speed Minimum depth Maximum speed Reset 3 seconds Average speed Reset 3 seconds Deep alarm Alarm on/off 3 seconds + Alarm on/off Set alarm level - Log Shallow anchor alarm Reset 3 seconds Alarm on/off Deep anchor alarm 3 seconds Trip 3 seconds Water Temp. Offset With Set alarm level screen displayed, press the and keys simultaneously to save the alarm level and return to normal operation. Adjusting display backlighting/contrast To enter adjust mode, press OFF for 1 second to adjust BACKLIGHTING and a further 1 second to adjust CONTRAST LEVEL 2 or LEVEL 3 LEVEL 2 LEVEL 1 LEVEL 1 To exit adjust mode press or wait for 5 second timeout ST40 Bidata Instrument - quick reference guide Calibration USER CALIBRATION Hold down and for 2 seconds INTERMEDIATE CALIBRATION Hold down and for 4 seconds User cal + Depth response + Speed response - If there is no key activity with either the User cal or Software version screen displayed, calibration will time out to normal operation after 5 seconds Software version MASTER Depth status REPEATER MASTER M Depth units FT Speed status REPEATER FA KPH Speed units MPH KTS To leave any calibration routine and return to normal operation, hold down and for 2 seconds NM Distance units SM KM C Temp. units F + Cal factor - OFF Shallow alarm lock ON W/L Depth offset WARNING: Correct offset values OFST are essential to the safe operation of the vessel. KEEL Set to SOG Press for 3 seconds to apply SOG as current speed Document number: 86048_2 (to be used with handbook: 81159_2) Date: 1 May 2001