Read this Quick Setup Guide before using the printer. Before you can use the printer, you must set up the hardware and install the driver. Step 1 Laser Printer HL-5130/5140/5150D Setting Up Your Printer Step 2 Installing the Driver Quick Setup Guide USB Parallel USB Installing the Driver Macintosh® USB HL-5130 HL-5140 page 16 HL-5150D page 17 page 12 page 14 Mac® OS 8.6 ­ 9.2 Mac® OS X 10.1 / 10.2 page 20 Setup is Complete! For the latest driver and to find the best solution for your problem or question, access the Brother Solutions Center directly from the CD-ROM/Driver or go to http://solutions.brother.com Keep this Quick Setup Guide and supplied CD-ROM in a convenient place for quick and easy reference at all times. Windows® Parallel Windows® USB Setting Up Your Printer Safety Precautions To Use the Printer Safely Warning Indicates warnings that must be observed to prevent possible personal injury. Note Indicates cautions that must be observed to use the printer properly or prevent damage to the printer. Hint Indicates notes and useful tips to remember when using the printer. User's Guide Indicates reference to the User's Guide which is on the CD-ROM we have supplied. Warning There are high voltage electrodes inside the printer. Before replacing internal parts, cleaning the printer or clearing a paper jam, make sure you have turned OFF the power switch and unplugged the power cord from the power outlet. Do not handle the plug with wet hands. Doing this might cause an electrical shock. After you have just used the printer, some internal parts of the printer are extremely hot. When you open the front or back covers of the printer, never touch the shaded parts shown in the illustration. Inside the printer (Front View) Open the Face-up Output Tray (Rear View) Table of Contents Regulations ................................................................................................................................2 Getting Started Carton Components ..................................................................................................................4 Control Panel .............................................................................................................................5 Supplied CD-ROM ......................................................................................................................6 Step 1 Setting Up Your Printer Insert the CD-ROM into the CD-ROM Drive ....................................................................7 Install the Drum Unit Assembly ......................................................................................8 Load Paper in the Paper Tray ..........................................................................................9 Print a Test Page ............................................................................................................10 Step 2 Installing the Driver For USB Interface Cable Users ..............................................................................................12 For Parallel Interface Cable Users ........................................................................................14 For USB Interface Cable Users ..............................................................................................16 For Mac OS® 8.6 to 9.2 Users (HL-5130/5140 Users) .................................................16 For Mac OS® 8.6 to 9.2 Users (HL-5150D Users) ........................................................17 For Mac OS® X 10.1 / 10.2 Users ..................................................................................20 Other Information Shipment of the Printer ...........................................................................................................22 Options .....................................................................................................................................23 Consumables ...........................................................................................................................23 Troubleshooting User's Guide Chapter 6 1 Regulations Federal Communications Commission (FCC) Declaration of Conformity (For USA) Responsible Party: Brother International Corporation 100 Somerset Corporate Boulevard P.O. Box 6911 Bridgewater, NJ 08807-0911 USA Telephone: (908) 704-1700 "EC" Declaration of Conformity Manufacture Brother Industries Ltd., 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan Plant Brother Technology (Shenzhen) Ltd. NO6 Gold Garden Ind. Nanling Buji, Longgang, Shenzhen, China declares, that the products Product name: Model number: Product options: Laser Printer HL-5130, 5140, 5150D and HL-5170DN HL-51 Lower Tray Unit LT-5000/DIMM complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ­ ­ ­ ­ Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Herewith declare that: Products description: Product Name: Model Number: Laser Printer HL-5130, HL-5140, HL-5150D, HL-5170DN HL-51 are in conformity with provisions of the Directives applied : Low Voltage Directive 73/23/EEC (as amended by 93/68/EEC) and the Electromagnetic Compatibility Directive 89/336/EEC ( as amended by 91/263/EEC and 92/ 31/EEC and 93/68/EEC). Standards applied: Harmonized: Safety: EN60950: 2000 EMC: EN55022:1998 Class B EN55024:1998 EN61000-3-2:1995 + A14:2000 EN61000-3-3:1995 Year in which CE marking was first affixed: 2003 Issued by: Date: Place: Signature: Brother Industries, Ltd. 1 August, 2003 Nagoya, Japan Important A shielded interface cable should be used in order to ensure compliance with the limits for a Class B digital device. Changes or modifications not expressly approved by Brother Industries, Ltd. could void the user's authority to operate the equipment. Industry Canada Compliance Statement (For Canada) This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Takashi Maeda Manager Quality Management Group Quality Management Dept. Information & Document Company International ENERGY STAR® Compliance Statement The purpose of the International ENERGY STAR® Program is to promote the development and popularization of energy-efficient office equipments. As an ENERGY STAR® Partner, Brother Industries, Ltd. has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Radio interference (220-240 volt model only) This printer follows EN55022 (CISPR Publication 22)/Class B. Before you use this product, make sure that you use the following interface cables. 1. A shielded parallel interface cable with twisted-pair conductors and that it is marked "IEEE 1284 compliant". 2. A USB cable. The cable must not be more than 2 meters long. Laser Safety (100 to 120 volt Model Only) This printer is certified as a Class I laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968. This means that the printer does not produce hazardous laser radiation. Since radiation emitted inside the printer is completely confined within protective housings and external covers, the laser beam cannot escape from the machine during any phase of user operation. 2 FDA Regulations (100 to 120 volt Model Only) U.S. Food and Drug Administration (FDA) has implemented regulations for laser products manufactured on and after August 2, 1976. Compliance is mandatory for products marketed in the United States. One of the following labels on the back of the printer indicates compliance with the FDA regulations and must be attached to laser products marketed in the United States. MANUFACTURED: Brother Industries, Ltd., 15-1 Naeshiro-cho Mizuho-ku Nagoya, 467-8561 Japan This product complies with FDA radiation performance standards, 21 CFR subchapter J. IT power system (For Norway only) This product is also designed for an IT power system with phase-to-phase voltage 230V. Geräuschemission / Acoustic noise emission (for Germany only) Lpa < 70 dB (A) DIN 45635-19-01-KL2 Wiring information (for UK) Important If you need to replace the plug fuse, fit a fuse that is approved by ASTA to BS1362 with the same rating as the original fuse. Always replace the fuse cover. Never use a plug that does not have a cover. MANUFACTURED: Brother Technology (Shenzhen) Ltd. NO6 Gold Garden Ind. Nanling Buji, Longgang, Shenzhen, China This product complies with FDA radiation performance standards, 21 CFR Subchapter J Caution: Use of controls, adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure. Warning - This printer must be earthed. The wires in the mains lead are coloured in line with the following code : Green and Yellow: Blue: Brown: Earth Neutral Live If in any doubt, call a qualified electrician. IEC 60825 specification (220 to 240 volt model only) This printer is a Class 1 laser product as defined in IEC 60825 specifications. The label shown below is attached in countries where it is needed. CLASS 1LASERP RODUCT APPAREIL Å LASER DE CLASSE 1 LASER KLASSE 1 PRODUKT This printer has a Class 3B laser diode which produces invisible laser radiation in the scanner unit. You should not open the scanner unit under any circumstances. Caution: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. For Finland and Sweden LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT Varoitus! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle. Om apparaten används på annat sätt än i denna Bruksanvisning specificerats, kan användaren utsättas för osynlig laserstrålning, som överskrider gränsen för laserklass 1. Varning Internal laser radiation Maximum radiation power: 5 mW Wave length: 760 - 810 nm Laser class: Class IIIb (Accordance with 21 CFR Part 1040.10) Class 3B (Accordance with IEC 60825) IMPORTANT - For Your Safety To ensure safe operation the supplied three-pin plug must be inserted only into a standard three-pin power outlet that is properly grounded through the normal household wiring. Extension cords used with this printer must be three-pin plug type and correctly wired to provide proper grounding. Incorrectly wired extension cords may cause personal injury and equipment damage. The fact that the equipment operates satisfactorily does not imply that the power is grounded and that the installation is completely safe. For your safety, if in any doubt about the effective grounding of the power, call a qualified electrician. Disconnect device You must install this printer near a power outlet that is easily accessible. In case of an emergency, you must disconnect the power cord from the power outlet to shut off the power completely. Caution for LAN connection Connect this product to a LAN connection that is not subjected to over voltages. 3 Getting Started Carton Components Printer 2 3 4 1 7 1 Face-down Output Tray Support Flap (Support Flap) 2 Control Panel 3 Front Cover Release Button 4 Manual Feed Tray (HL-5130/5140) Multi-purpose Tray (HL-5150D) 5 5 Paper Tray 6 Front Cover 7 Face-down Output Tray (Top Output Tray) 6 CD-ROM (including User's Guide) Quick Setup Guide Drum Unit Assembly (including toner cartridge) AC Power Cord Carton components may differ from one country to another. Save all packing materials and the printer carton. The interface cable is not a standard accessory. Please purchase the appropriate interface cable for ...