User manual THOMSON 27LB130S5U - QUICK START GUIDE

IFC130-L_EN 4/08/05 17:22 Page 1 Contents Getting started Important information ....................................................................2 Safety ....................................................................................................2 LCD panel............................................................................................2 Care ....................................................................................................2 Switching on ......................................................................................3 Remote control TV functions ..........................................................4 Playing files from memory cards ....................................................4 Using the remote control for other equipment ............................4 Programming the remote control ..................................................4 Programming the volume control function ..................................5 Advanced functions Adjusting the sound ........................................................................10 Tone control ....................................................................................10 Headphone settings ........................................................................11 Adjusting the picture ......................................................................11 Other settings ................................................................................12 Setting the time ..............................................................................13 Setting the time and date ..............................................................13 Using the calendar ..........................................................................13 Programming the sleep timer........................................................13 Programming the wake-up timer ................................................14 Parental control ..............................................................................14 Definign a PIN code........................................................................14 Locking a channel or AV programme ..........................................15 Locking the buttons on the TV set ..............................................15 Locking the Time menu..................................................................15 Locking the Installation menu ......................................................15 Operation (TV mode) ....................................................................15 Customising your television ..........................................................16 Preferences........................................................................................16 Configuring AV sockets ..................................................................17 Playing files from memory cards ..................................................18 Teletext ............................................................................................19 Accessing Teletext............................................................................19 Navigator ..........................................................................................19 Other Teletext functions ................................................................19 EN Channel set-up Initial set-up ......................................................................................6 Manual channel set-up ......................................................................7 General operation Switching the TV set on and off ......................................................8 Accessing channels............................................................................8 Accessing your favourite channels ..................................................8 Accessing AV programmes ..............................................................8 Volume ..............................................................................................8 Displaying status information ..........................................................8 Zoom ..................................................................................................9 List of channels ..................................................................................9 Freezing a picture ............................................................................9 Flat batteries ....................................................................................9 Product information ........................................................................9 Other information Sockets ............................................................................................20 Connecting active speakers or an amplifier ................................21 Connecting headphones ................................................................21 Connecting a video recorder ........................................................21 This manual applies to several TV set models. Some features may not be available on the model you purchased. Refer to the feature table provided with this manual to find out the main features of the relevant model. Optional functions are indicated by the following symbol: The model number of your TV set is on a label at the back of the set and on the cover of this manual. In the interest of improving the quality of our products, we reserve the right to modify their features.The information in this manual is, therefore, subject to change and does not represent any kind of contract. This product is designed and manufactured with high quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste. Please, dispose of this equipment at your local community waste collection/recycling centre. In the European Union there are separate collection systems for used electrical and electronic product. Please, help us to conserve the environment we live in! This publication is printed on recycled paper. 1 IFC130-L_EN 4/08/05 17:22 Page 2 Getting started Important information Safety Ensure that your domestic mains supply voltage matches the voltage indicated on the identification sticker located at the back of your set.This LCD TV set is a class 1 appliance. It must be connected to an electrical wall socket with an earth. LCD panel The LCD panel used in this product is made of glass.Therefore, it can break when the product is dropped or impacted upon by other objects. The screen of your LCD TV is protected by a glass shield. Under certain conditions (changes of temperature and humidity) moisture may form between the glass and the screen. If this relatively rare condition arises, it is only necessary to switch on the LCD TV for around twenty minutes, to make it disappear. The LCD panel is a very high technology product, giving you finely detailed pictures. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red.This does not affect the performance of your product. EN The TV set's components are sensitive to heat.The maximum ambient temperature should not exceed 35° Celsius. Do not cover the vents at the back or sides of the TV set. Leave sufficient space around it to allow adequate ventilation. Install the appliance away from any source of heat (fireplace, ...) or appliances creating strong magnetic or electric fields. Moisture in rooms where the set is installed should not exceed 85% humidity. If you have to use the TV set outdoors, do not expose it to rain or splashing water. Do not place any object containing a liquid (vase, glass, bottle, etc.) on or near the set. Moving the set from a cold place to a warm one can cause condensation on the screen (and on some components inside the TV set). Let the condensation evaporate before switching the TV set on again. The button at the side of the TV set can be used to switch it on and put it into standby mode. If you are not going to be watching the TV for a lengthy period of time, switch it off completely by removing the plug from the mains power socket. During thunderstorms, we recommend that you disconnect the TV set from the mains and aerial so that it is not affected by electrical or electromagnetic surges that could damage it. For this reason, keep the mains and aerial sockets accessible so they can be disconnected, if necessary. Unplug the TV set immediately if you notice it giving off a smell of burning or smoke.You must never, under any circumstances, open the TV set yourself, as you run the risk of an electric shock in doing so. Care Use a glass-cleaning product to clean the screen and a soft cloth and mild detergent to clean the rest of the set. Important: Using strong detergents, alcohol-based and abrasive products may damage the screen. Dust the vents at the back and sides regularly. Using solvents, abrasive or alcohol-based products could damage the TV set. If an object or liquid enters inside the appliance, unplug it immediately and have it checked by an authorised engineer. Never open the appliance yourself since this may put you at risk or damage the appliance. THOMSON disclaims any liability if the TV set is not used in accordance with this manual. HELPLINE You can contact THOMSON by dialling: 0871 712 1312 (for United Kingdom, £0.10/mn inc VAT) www.thomson-europe.com Before setting up your television set, make sure that the surface you want to put the set on can support its weight (see the list of specifications provided with the booklet). Don't place the set on an unstable surface (e.g. moving shelf, very edge of a unit) and make sure that the front of the television set does not overhang the surface it is sitting on. 2 IFC130-L_EN 4/08/05 17:22 Page 3 Getting started Switching on Follow the instructions on this page on how to switch on your TV set and the remote control before going on to following pages describing how to use the remote control and the channel set-up procedure. 1. Insert two LR06 or AA batteries in the remote control. Precautions on using batteries: - Only use the battery types specified. - Make sure you use the correct polarity. - Do not mix new and used batteries. - Do not use rechargeable batteries. - Do not expose batteries to excessive heat, throw them in a fire, recharge them or try to open them, as this could cause them to leak or explode. - Remove the batteries from the remote control if you are not using it for a long period of time (several weeks). EN 220 - 240 V ~ 50 Hz 2. Connect the power cable FIRST to the television, THEN to a mains socket. Mains socket in continental Europe Your TV set should only be connected to a 220 - 240 V ~ 50/60 Hz AC supply. It must not be connected to a DC supply. If the plug is detached from the cable, do not, under any circumstances, connect it to a mains socket, as there is a risk of electric shock. Equipment for the UK and Ireland is supplied with a mains cable fitted with a moulded plug. 5A This plug contains safety components and must not be replaced by one sold by general retailers. It is fitted with a fuse that protects your television. If your set has stopped working, the fuse may have blown. If it has, replace it with an identical ASTA or BSI certified (BS1362) 5-amp fuse. 3. Connect the outside aerial or cable network to the TV Antenna socket at the back of the TV set. The aerial socket (75 Ohms - VHF / UHF / cable) can be used for connecting an external aerial or other equipment fitted with a modulator (video recorder, satellite receiver, etc.). We recommend that you do not connect other equipment (video recorder, satellite receiver, etc.) to your TV set to begin with, so as not to complicate the set-up procedure with the additional steps involved. Connect them when you have finished setting up the channels by referring to page 20 of this manual. 4. Switch the TV on by pressing the button located on the side. Note: The first time you switch on the television, the language selection menu appears. You will find a description of how to use the remote control on page 4.Then go to page 6 for information on the initial set-up, or to page 7 for information on manual set-up (if the channels have already been set up on your TV). Note: Before connecting other devices to the AV sockets, carry out the initial channel set-up (described on page 6) in order to avoid any problems with equipment selection. Please respect the environment and the relevant regulations. Before you dispose of batteries (or accumulators), ask your dealer whether they require special recycling and if he is able to take them back. 3 IFC130-L_EN 4/08/05 17:22 Page 4 Getting started Remote control TV functions Most of your television's functions are available via the menus that appear on the screen.The remote control supplied with your set can be used to navigate through the menus and to configure all the general settings. Playing files from memory cards When playing mp3,WMA, JPEG, MPEG and DivX files, you can use some of the buttons on the remote control to perform certain functions, which vary according to the type of file. INFO To display the Info menu. REVERSE mp3 and WMA: to return to the previous file. JPEG: to reduce the projection speed. PLAY To play. FORWARD mp3 and WMA: to go on to the next file. JPEG: to increase the projection speed. STOP To stop playing. PAUSE To pause, stop at a particular picture. MPEG and DivX: to change files. 0-9 MPEG and DivX: to select a file by its number. EN Standby / quit standby. TV To access TV mode. Press this button to control the television. VCR To access VCR mode. DVD To access DVD mode. SAT To access SAT mode. AUX To access AUX mode. AMP To access AMP mode. light To provide information: - it lights up when you press a button, - it indicates the status when the remote control is being programmed (see further below), - if the batteries are run down, it flashes when you press a button. PRESETS (red button) preset settings menu. Zzz/LIST (green button) list of channels (see page 9). INFO (yellow button) status information (see page 8). GUIDE (blue button) programme information (see page 8). TEXT (purple button) Teletext (see page 19). The coloured buttons can also be used for operating Teletext. To select menu options. To set functions, change values, enable and disable functions (checkbox) in menus. To select the picture format or zoom. OK To confirm a selection, enable and disable functions (checkbox) in menus. To freeze the picture (see page 9). MENU To access the OVERVIEW menu. EXIT To exit the menu structure. +/- To control the volume. MUTE To switch the sound off and back on again. RETURN To return to the previous channel/AV programme. PR+/PR- To change channels. 0-9 To select a channel by its number. In the case of channel numbers with two digits: - press the tens digit for a few seconds to display it on the screen, then press the units digit or - press 0/-- to display "--", then enter the channel number. To enter numeric values in menus. In PC mode, the buttons 1-9 can be used to return to TV mode and change channels. AV To select an appliance connected to an AV socket. DEMO (Disabled). Using the remote control for other equipment This remote control can be used to control other appliances using the programmable buttons VCR, DVD, SAT, AMP and AUX. For each button you can control the following appliances: VCR: video recorder DVD: DVD player SAT: satellite receiver, cable network AMP: hi-fi system, Home Cinema amplifier AUX: decoder for terrestrial digital TV set and any other appliance. For instance, if you have two video recorders, you can program the VCR button to control one video recorder, and program the AUX button to control the other one. Note: The TV button is not programmable. Programming the remote control Automatic code search This method can be used to automatically find the most appropriate code for your appliance. 1. Switch on the appliance you wish to use the remote control with. 2. Press the relevant button for this appliance on the remote control, and while holding this button down, press the standby button until the light or the appliance buttons of the remote control come on. Release both buttons. 3. Point the remote control at the appliance and press PLAY. Wait until the light stops flashing. If the appliance has not gone into standby mode, press the PLAY button again to continue the search for the next set of codes. Repeat this operation until the appliance goes into standby mode.There are around 20 sets of codes. 4. When the appliance goes into standby mode, switch it on again without using the remote control. Press the REV button as many times as is required to return the appliance to standby mode. 5. Press the STOP button and hold it down until the light or the appliance buttons of the remote control go off. Note:You can cancel the programming operation at any time by pressing the EXIT button. 4 IFC130-L_EN 4/08/05 17:22 Page 5 Getting started Manual programming This method involves carrying out a manual search for the codes to be used for controlling your other appliances. Programming the volume control function If you have programmed the TV remote control to use with other appliances and these are connected to an amplifier you can also programme the remote control to adjust the volume when you are using one of these appliances.The example below describes the procedure for programming a DVD player. 1. Switch on the appliance you wish to use the remote control with. 2. Press the relevant button for this appliance on the remote control, and while holding this button down, enter one of the codes relevant to your make of appliance (there is a list of codes at the end of this manual). If the light or the appliance buttons of the remote control flash you have entered the wrong code or it is not possible to program the remote control. 1. Programme the AMP button on the remote control to use with the amplifier (refer to page 4). 2. Move the remote control away from the appliances. Press the - button and while holding it down, press the relevant mode button (DVD, in this example), then the AMP button. Release the - button. EN 3. Point the remote control at the appliance and press the relevant button (VCR, DVD, etc). Press the standby button. If the appliance does not go into standby mode, try another code. Depending on the year of manufacture and the type of appliance, some functions may not be available. Certain codes may cover more functions than others.Test the functions you can control and, if appropriate, try other codes. Note here the code(s) which work best. VCR DVD SAT AUX AMP 3. Switch on the amplifier, then the DVD player. 4. Set the remote control to DVD, play a disc and adjust the volume using the +/- buttons. Repeat this operation for the other appliances. To cancel the programmed function for any of the appliances, press - button, while holding it down and enter the code 000 the using the numeric buttons. When you change the remote control's batteries, remember to reprogram it. MENU OK EXIT 0-9 PR+/PRAV REV PLAY FWD STOP PAUSE REC MUTE +/- Video recorder Press the VCR button. On/Standby To display the main menu Vertical scrolling in menus Horizontal scrolling in menus To confirm an action To close a menu To directly access channels or enter numeric values To change channels To select AV input Rewind Play Fast forward Stop Pause picture Record DVD player Press the DVD button. On/Standby To display the main menu Vertical scrolling in menus Horizontal scrolling in menus To confirm an action To close a menu To enter numeric values or select options in menus To change chapters To select AV input Rewind Play Fast forward Stop Pause picture Satellite receiver Press the SAT button. On/Standby To display the main menu Vertical scrolling in menus Horizontal scrolling in menus To confirm an action To close a menu To directly access channels or enter numeric values To change channels Hi-fi system Press the AMP button. On/Standby To select a station using its number To change stations To switch the sound off and back on again To set the volume level Important: If the batteries in your remote control are run down you can use the buttons on the front of your TV set. In TV mode, they have the same functions as the corresponding buttons on the remote control. In the menus they have the following functions: PR PR VOL VOL ¦ MENU or OK or OK To confirm a selection 5 IFC130-L_EN 4/08/05 17:22 Page 6 Channel set-up Initial set-up Initial set-up involves selecting all the settings required to be able to search for and store all the channels you can receive. Make sure that the television is switched on and follow all the steps in turn specified hereafter. The first time you switch the television on, the language selection menu appears. 1 EN English Français Deutsch Italiano Español Nederlands Português Norsk Svenska Dansk âetina E Magyar Polski Suomi 1. Select your language using the buttons and confirm by pressing OK.When you select a language, it is applied to the menus immediately. buttons. 2. A list of countries appears. Select the relevant country using the Press OK to confirm. Note: This is the country you are in, or the country whose channels you want to receive if you live near its borders. 3. The Automatic installation menu appears.The Automatic search option is 2 Country Return UK Germany Italy Belgium Austria Sweden Switzerland Other selected. Start the automatic set-up by pressing OK.The message Running appears next to the Automatic search option and the Progress and Channels found options appear, informing you of the installation procedure's progress. Notes: - The automatic set-up process can take up to 10 minutes. To prevent the channel set-up process from being interrupted, wait for the message indicating that the set-up is complete before closing the menu. - The automatic set-up process deletes all the channels previously stored. France Spain Portugal Netherlands Denmark Finland Norway Russia Poland Cz. Republic Hungary Luxembourg Australia New Zealand 4. Channels are arranged in a pre-set order. - To modify this order, name and rename channels or delete channels stored twice, press OK and go to step 5. - If you do not want to reorganise the channels, press EXIT to close the menu. To select your country, use the direction keys and press OK. 5. The Organiser menu allows you to change the order of the channels as arranged 3 Automatic installation Return Automatic search Automatic update Progress Channels found Running ... 05 during the automatic set-up process, to name or rename channels, as well as delete channels stored twice or with poor reception quality.You can also define certain channels as your favourite channels so that you can access them more quickly by pressing the PR+/PR- buttons. Simply follow the instructions at the bottom of the screen. Use a TV programme magazine to identify the channels. · Organising channels: Select the Select channel option. Using the PR+/PR-, or numeric buttons, display the number of the channel to be moved. Select the Swap with channel option. Using the or numeric buttons, enter the number you want to assign this channel to. Press OK. Changing a channel name: Select the Select channel option. Using the PR+/PR-, or numeric buttons, display the number of the channel whose name you want to change. Select the Channel name option and choose a name from the list using the buttons. If none of the names available is suitable select ------.The cursor appears at the first dash. Use the buttons to select a character from the list made up of the letters in the standard alphabet, the numbers 0 to 9 and certain punctuation symbols. Use the buttons to go to another character. A name can only have a maximum of six characters. Press OK to confirm. or Deleting a channel: Select the Select channel option. Using the PR+/PR-, numeric buttons, display the number of the channel to be deleted. Select the Delete channel option and press OK. Defining a favourite channel: Select the Select channel option. Using the PR+/PRor numeric buttons, display the number of the channel you want to define as a favourite. Select the Favourite channel option and check the box by pressing OK. You can define up to six favourite channels. Auto installing in progress. Please wait. To cancel, press EXIT. · 5 Organiser Return Select channel Swap with channel Channel name Delete channel Favourite channel 02 __ BBC2 02 01 BBC1 02 BBC2 03 ITV1 04 Channel 4 05 Channel 5 06 Sky One 07 Film Four 08 Sky Sports 09 MTV 10 Discovery · Enter the number of the channel you want to move, delete or set as favourite. · When you have finished press EXIT to close the menu. To access the Organiser menu another time, press the MENU button to display the OVERVIEW menu, select Installation and press OK.Then select Organiser from the Installation menu. 6 IFC130-L_EN 4/08/05 17:23 Page 7 Channel set-up Manual channel set-up Manual Installation Return Standard Reception Channel search Fine tuning Store on number Channel name Decoder Teletext char. set I... Aerial... CH 10 01 BBC1 1... Follow the procedure given on this page if you find that some channels have not been stored during the initial set-up.This can happen if you are setting up cable network channels. Setting up channels manually requires every setting for a particular channel to be entered, one at a time. Display the OVERVIEW menu by pressing the MENU button. Select the Installation option and press OK to confirm. Select the Manual installation option from the Installation menu and press OK to confirm. 1. Select the Standard option. Use the Choose you standard, then select reception. buttons to select the standard for your EN country. Note: The following standards are available to choose from: I for the UK and Ireland, France for France and Luxembourg, DKK' for Eastern Europe, the Middle East and Asia, EURO BG for Western Europe, Australia for Australia, and New Zealand for New Zealand. 2. Select the Reception option. Select the reception method for the channels (aerial or cable network) using the buttons. 3. Select the Channel search option. Enter the number of the reception channel or use the buttons to find the channels.When a channel has been found the picture is displayed. 4. If the picture is not clear you can adjust the setting.You do this by selecting the Fine tuning option and adjusting it with the buttons. 5. Select the Channel name option and choose a name from the list using the buttons. If none of the names available is suitable select CH _ _ _ _. Use the buttons to select a character from the list made up of the letters in the standard alphabet, the numbers 0 to 9 and certain punctuation symbols. Use the buttons to go to another character. Press OK to confirm. 6. If the channel is encoded and you want to connect a decoder to the AV1 socket, select the Decoder option and check the box by pressing OK. 7. Then select the Teletext char. set option and choose the character set that will be used for Teletext on this are available: 1:Western Europe 2: Eastern Europe 3: Russian and Bulgarian 4: Greek channel using the 5: Arabic 6: Ukrainian 7: Belarussian buttons.The following character sets 8. Then select the Store on number option and enter the number to be assigned to this channel using the numeric buttons (for instance, for BBC1 type 01). Press OK. Important: Whenever you change a value in the Manual Installation menu, the Store on number option starts flashing. To confirm your change you need to select the Store on number option and press OK. If you do not confirm the change it will be cancelled when you change channels or put the TV set in standby. Repeat this procedure to find other channels. Notes: - For cable networks, to search for missing channels, select Other instead of a country, then select Automatic update in the Automatic installation menu. - If you wish to go through the whole initial set-up process, put the TV in standby mode, then hold down the VOL ¦ button on the television and the MENU button on the remote control until the menu displays. Proceed as for the initial set-up. - Subsequent set-ups: - The Automatic update function allows you to set up channels just launched or any channels that are missing or wrongly set up. - The Automatic search function is used for setting up channels after the initial set-up (e.g. after moving house). This process deletes all channels previously stored. To set up a new channel, it is better to use Automatic update or Manual Installation. 7 IFC130-L_EN 4/08/05 17:23 Page 8 General operation Switching the TV set on and off To switch the TV set on: - press the button on the side of the TV set, the or any numeric button on the remote control, or - press the TV, OK or PR+/PR- buttons to switch the television on at the last channel or AV programme you were watching, or Accessing AV programmes Press the AV button to display the last selected audio-visual programme and scan through the other audio-visual programmes. AV selection loop: AV1, AV2, AV3, CMP (= component,YPrPb or YCrCb),VGA, HDMI. EN - press the AV button to switch the television on at the last AV programme you were watching. To put the TV set into standby mode, press the button on the side of the TV set or the button on the remote control.The TV set remains powered up, but with low energy consumption. To switch off the TV set, unplug the mains socket from the mains outlet. Volume Volume control: use the ¦ VOL buttons on the side of the TV set or press the +/- buttons on the remote control to increase or decrease the volume. Sound mute: press the button to temporarily mute the sound. Press this button again or the + button to restore it. Accessing channels Using the numeric buttons: for channels 1 to 9, press the corresponding numeric button; for channels 10 to 99, - press the tens digit for a few seconds to display it on the screen, then press the units digit. For instance, for programme 24, press and hold 2 to display 2-, then press 4; or - press the 0/-- button to display "--", then enter the two digits. Using the PR+/PR- buttons: scroll through the channels. AV programmes are not included in the cycle unless you use the buttons on the side of the TV set. Using the list of programmes: refer to page 9. To access the channel or AV programme previously being watched, press the RETURN button. +/- buttons on the Headphone volume control: press the remote control to display the volume control bar.Then use the buttons to switch to the headphone volume control bar. Use the +/- buttons to adjust the volume. Displaying status information In TV mode you can press the INFO (yellow) button on the remote control to display the number and name of the relevant channel, the time and date, the type of sound and format or zoom. If the turn-off timer is set the relevant symbol is displayed, along with the time remaining until the TV set is switched off. Press the GUIDE (blue) button on the remote control to display the name and the start time for the current programme and the following programme. If this information is not available you will receive a message to this effect. In PC mode you can press the INFO (yellow) button on the remote control to display the time and date, the type of sound and format, as well as the source of the signal being received and the resolution. When you switch the TV set on and change channels or exit Teletext, the channel's number and name are displayed. Note: If you activate the Channel number function in the Preferences menu, the channel number will be displayed permanently (see page 16). Accessing your favourite channels You can define the channels you watch most often as your favourite channels.This will allow you to create your own list of channels which you can access more quickly using the PR+/PRbuttons on the remote control. 1. Follow the procedure described in point 5 on page 6 for defining a channel as your favourite channel. 2. Press the PRESETS (red) button on the remote control. 3. Select the PR+/PR- keys option. Use the buttons to select Favourites. When you change channels using the PR+/PR- buttons on the remote control only your favourite channels will be available. To cancel this option, select All channels under the PR+/PR- keys option. Note: The PR buttons on the TV set allow you to access all the channels set up, even if the Favourites option is selected 8 IFC130-L_EN 4/08/05 17:23 Page 9 General operation Zoom In TV mode, you have the option of changing the display format and using the zoom function via the buttons.The available formats and zoom functions are: 4/3 format - picture in centred 4:3 format 14/9 zoom - picture in centred letterbox 14:9 format 16/9 zoom - picture in centred letterbox 16:9 format 16/9 zoom up - picture in 16:9 format with subtitles. Cinerama - picture in widescreen 4:3 format 16/9 format - picture in widescreen 16:9 format In 14/9 zoom, 16/9 zoom, and 16/9 zoom up modes, you can temporarily shift the picture up and down using the buttons. In PC mode, only 4/3 format and 16/9 format are available. EN List of channels List 01 02 03 04 05 06 07 08 09 BBC1 BBC2 ITV1 Channel 4 Channel 5 Sky One Film Four Sky Sports MTV Press the Zzz/LIST (green) button on the remote control to display the list of channels. It contains a maximum of 11 pages and shows the name and number of every channel.The last page lists units connected to the AV sockets. The list appears on the page featuring the channel or AV programme which you are currently watching.The channel or AV programme you are watching is indicated by a symbol. Any channels and AV programmes which are locked are indicated by a closed padlock and those temporarily unlocked are indicated by an open padlock. Favourite channels are indicated by the letters FAV next to them. Note: For more information on locking channels, refer to the Parental control section. FAV FAV TV To tune to the channel selected: OK To display previous/next page: ¦¤¤ To watch one of the channels on the displayed page, select it using the buttons and press OK, or use the PR+/PR- buttons.You can also enter the last digit of the channel number (for example, 5 for 25).The selected channel is shown. You can scroll through the pages using the Press EXIT to close the menu. buttons. Freezing a picture Press the OK button to freeze the picture. Press any button on the remote control or TV set to cancel this function. Flat batteries When the batteries are flat a message appears on the screen when you press a button on the remote control. You should change the batteries and reprogram the remote control (see page 4). Product information Press the MENU button to open the OVERVIEW menu. Select the Contact us! option and press OK to confirm.The relevant screen appears.This will give you the Thomson Europe website address and the telephone number for the Helpline, if there is one (see page 2), as well as your TV set's serial number. 9 IFC130-L_EN 4/08/05 17:23 Page 10 Advanced functions Adjusting the sound Sound Return Tone control Sound type Sound mode Balance Dynamic Bass Auto Volume Level Sound effect Internal speakers Headphone Display the OVERVIEW menu by pressing the MENU button. Select the Sound option and press OK to confirm.The Sound menu appears with the following options: ... Stereo... Normal... Maximum... Off ... Tone control: this option gives you access to the Tone control menu (more details below). Note: In the case of AV sources, this option is not available if you have selected BBE ViVA under Sound mode. EN Sound type: select a sound type from the list using the buttons. The default sound type is Automatic for mono sources, Stereo for stereo sources and Stereo for AV sources. Note: The options offered depend on the programme you're watching. Refer to the table 1 opposite. 1 Broadcast Mono Stereo Dual NICAM - 3 Analog AV Sound types Automatic - Mono Mono - Stereo Sound 1 - Sound 2 Sound 1 - Sound 2 - Sound 3 Stereo - Sound 1 - Sound 2 Sound mode: use the default mode. buttons to choose a mode from the list. BBE ViVA is the Notes: - The options available depend on the sound type selected. Refer to the table 2 opposite. - BBE ViVA technology can be used to achieve a 3D sound effect using just two loudspeakers, while preserving the quality of the sound transmitted by the main speaker, such as dialogue. Balance: use the buttons to balance the sound between the left and right speakers. Dynamic Bass: this function is used to strengthen the bass. Select an option from the list using the buttons. Note: This option is not available if you have selected BBE ViVA under the Sound mode option. 2 Sound type Automatic Mono Stereo Sound 1 Sound 2 Sound 3 Sound modes Normal - Wide - BBE ViVA Normal - Wide - BBE ViVA Normal - Stereo wide BBE ViVA Normal - Wide - BBE ViVA Normal - Wide - BBE ViVA Normal - Wide - BBE ViVA Auto Volume Level: check the box by pressing the OK button, if you want to keep the same sound level for all channels. Sound effect: this function allows you to create sound effects. Select an option from the list using the buttons. Internal speakers: uncheck this box by pressing OK if you want to stop the sound coming from the internal speakers and connect external speakers to the TV set. If you unplug these external speakers, remember to check the box to reactivate the TV set's internal speakers (otherwise you will not get any sound). Headphone: this option allows access to the headphone setting menu (see further below). Press EXIT to close the menu. Select Return and press OK to return to the OVERVIEW menu. Tone control Tone control Return Sound preset Frequency range Select the Tone control option from the Sound menu and press OK to display the menu.The content of this menu depends on the options you have selected under Sound mode and Sound effect in the Sound menu. Film... 12 kHz... If you have not selected BBE ViVA under Sound mode and you have not selected any effect under Sound effect, the menu which is displayed allows you to select a predefined setting and choose your own settings using the graphic equaliser. It offers the following options: Sound preset: use the buttons to select the appropriate setting for the programme you are watching. The Personal setting stores your graphic equaliser settings. Note: The Sound preset option is not available if you have selected a sound effect under the Sound effect option. You can access the list of preset sound settings directly by pressing the PRESETS button (red) on the remote control, selecting the Sound preset option and choosing one of the preset settings from the list.Your selection is applied to all channels and AV programmes. Frequency range: the graphic equaliser has seven frequency bands. Select each band in turn using the buttons and make the necessary adjustments using the Press OK to confirm. buttons. Note: When you are setting the graphical equaliser, Personal appears under the Sound preset option and your settings are stored as your new personal settings. 10 IFC130-L_EN 4/08/05 17:23 Page 11 Advanced functions Tone control Return Bass Treble In every other instance, the menu displayed offers the following options: Bass, Treble: you can adjust these settings to the level you want using the buttons. Press EXIT to close the menu.To return to the Sound menu, select Return and press OK to confirm. Headphone settings Headphone settings Return Headphone volume Headphone bass Headphone treble Headphone sound Select the Headphone option from the Sound menu and press OK to display the menu.The following options are available: EN Headphone volume, Headphone bass, and Headphone treble: you can adjust these settings to the level you want using the Stereo... buttons. Headphone sound: select a sound type from the list using the buttons. The default sound type is Automatic for mono sources, Stereo for stereo sources and Stereo for AV sources. Press EXIT to close the menu.To return to the Sound menu, select Return and press OK to confirm. BBE ViVA is a trademark of BBE Sound Inc. Adjusting the picture Picture Return Picture preset Brightness Colour Contrast Black expand Tone Sharpness Noise reduction Other settings Personal... The menus for adjusting the picture are used to obtain the best picture setting according to your preference, the type of programme you are watching and the ambient lighting.When you make an adjustment only the selected option remains displayed, allowing you to see the changes taking place on screen.The entire menu is displayed again when you select another option or the time for making an adjustment has elapsed. Display the OVERVIEW menu using the MENU button. Select the Picture option and press OK to confirm.The Picture menu appears with the following options: Medium... Neutral Low... ... Picture preset: use the programme you are watching. buttons to select the appropriate setting for the Personal contains the values you have defined for the settings Brightness, Colour, Contrast, Black expand, Tone, Sharpness and Noise reduction. TV mode You can access the list of preset picture settings directly by pressing the PRESETS button (red) on the remote control, selecting the Picture preset option and choosing one of the preset settings from the list.Your selection is applied to all channels.You must, however, select a preset setting for each AV programme. Note: This function is only available in TV mode. Brightness, Colour, Contrast, Tone, Sharpness: adjust these settings as required using the buttons. buttons. buttons. Black expand: can be used to adjust the picture according to the ambient brightness. Select an option from the list using the Select an option from the list using the below). Press EXIT to close the menu.To return to the OVERVIEW menu, select Return and press OK to confirm. Noise reduction: improves the quality of the picture in the case of poor reception. Other settings: this option provides access to the Other settings menu (see further 11 IFC130-L_EN 4/08/05 17:23 Page 12 Advanced functions Picture Return Brightness Colour Contrast Tone Auto-adjustment Phase Clock Vertical position Horizontal position In PC mode you can access a number of specific functions: Neutral ... Auto-adjustment: this option allows you to automatically adjust the following functions: Phase, Clock, Vertical position and Horizontal position. Press OK until the message Running appears. Once the setting is implemented the message Done appears. Phase, Clock: adjust these settings as required using the buttons in order to enhance picture quality. Vertical position: use the Horizontal position: use the screen. buttons to move the picture vertically on the screen. buttons to move the picture horizontally on the EN PC mode Other settings Note: This menu is only available for TV channels and AV programmes. Other settings Return Photo Mode Film mode NTSC tint Automatic format Select the Other settings option from the Picture menu and press OK.The Other settings menu appears with the following options: Photo Mode: improves quality and stability of still pictures.When this function is enabled On... still pictures are detected automatically and their resolution enhanced. Check the box by pressing OK to enable this function. Note: This function is only available for certain audio-visual sources. Film mode: detects that the programme being broadcast is a film and enhances picture quality. Select an option from the list using the buttons. Notes: - The Advanced option is selected by default. - This function is only available for certain audio-visual sources. NTSC tint: is used to adjust the picture's tint. Adjust these settings as required using the buttons. Note: This function is only available for NTSC audio-visual sources. Automatic format: automatically applies the appropriate format to the picture. Check the box by pressing OK to enable this function. Note: This function is only available for certain audio-visual sources. Press EXIT to close the menu.To return to the Picture menu, select Return and press OK to confirm. 12 IFC130-L_EN 4/08/05 17:23 Page 13 Advanced functions Setting the time Time Return Sleep timer Time reference Time Date Calendar Wake up timer Wake up time Wake up channel Turn off timer Turn off time Off 04 BBC4 12:34 01/06/05 ... Once 07:00 10 CNN Once 12:00 The Time menu allows you to set the time and date on your TV set, to programme an automatic turn-off or wake-up timer and to view the calendar. Display the OVERVIEW menu by pressing the MENU button. Select the Time option and press OK to confirm. Setting the time and date 1. Select the Time reference option. 2. Select a channel which displays Teletext so that the time and date from this can be used as a reference, by using the buttons or entering a channel number using the numeric buttons on the remote control.The time and date appear in a couple of seconds if they are available on the channel that has been selected. EN 3. If the time and date are not supplied by Teletext they will not appear under the Time and Date options.You will then have to enter them manually. Select the Time option and enter the time using the numeric buttons or the buttons.The setting -- appears under the Time reference option. Select the Date option and enter the date using the numeric buttons in the format: DD/MM/YY. Note: In the event of the power supply being cut off (the TV set is unplugged or there is an electrical fault), the time and date will be lost, if they have been entered manually.You need to enter them again. In this instance, we advise you to consult a channel which has this information and to check that it is correct Using the calendar This menu allows you to look for a particular date. Calendar Return Month Year Today Mon 5 12 19 26 Tue 6 13 20 27 Wed 7 14 21 28 Thu 1 8 15 22 29 1. Select the Calendar option and press OK to confirm.The Calendar screen September 2005 ... Fri 2 9 16 23 30 Sat 3 10 17 24 Sun 4 11 18 25 appears. 2. Under Month select the month you want from the list using the buttons. 3. Under Year select the year you want from the list using the buttons. The calendar displays the selected month. To display the calendar for the current month, select the Today option and press OK to confirm.The current day is automatically selected if the date is available. Programming a turn-off timer You can programme the TV set's turn-off timer by setting a period of time after which or a specific time when the TV set goes into standby mode. To set a period of time after which the TV set goes into standby mode: 1. Select the Sleep timer option. 2. Using the buttons, set the period after which the TV set automatically goes into standby mode (4 hours maximum, at 5-minute intervals).To disable this function, select Off. To select a time for the TV set to go into standby: 1. Select the Turn off timer option. 2. Using the buttons, choose Once or Daily from the list. Select Off to disable this function. 3. Select the Turn off time option. Using the numeric buttons or the time at which you want the TV set to go into standby mode. buttons, enter 13 IFC130-L_EN 4/08/05 17:23 Page 14 Advanced functions Programming the wake-up timer This function can be used to set the time for the set to come on, for instance, for the television to wake you up. 1. Select the Wake-up timer option. Using the numeric buttons or buttons, choose Once or Daily from the list to activate this function and access the relevant options. Select Off to disable this function. buttons. 2. Under the Wake-up time option enter the wake-up time using the numeric or EN 3. Under the Wake-up channel option enter the number of the channel you want to wake you using the or numeric buttons.You can also select an AV programme using the AV button. In this case, make sure you programme the equipment connected to the AV socket to come on as well. 4. Press EXIT to close the menu. A message appears to say that the wake-up timer has been programmed. Press any button on the remote control to make the message disappear. 5. To enable the function, press the into standby mode. button on the remote control to put the TV set The TV set will automatically come on at the programmed time if you do not interrupt it by using the remote control. Once the TV set is on: - you can use all its functions as normal; - you can put the TV into standby mode. In this case, the Wake-up timer function is disabled for the relevant day; - if the channel or AV programme selected from the menu is locked you need to enter your code to access it. Parental control The parental control functions allow you to restrict your children's access to the television. This means that you can lock the set's buttons and prevent access to certain channels and/or AV programmes.You can also lock the Time menu to prevent any of the automatic turn-off and wake-up timers you have programmed for your set from being modified.You can also prevent access to the Installation menu to prevent any channels from being set up without your consent. All these functions are protected by a PIN code. Display the OVERVIEW menu by pressing the MENU button. Select the Parental control option and press OK to confirm. Follow the instructions on screen for displaying the menu. Defining a PIN code PIN code Return PIN code To be able to use the functions in the Parental control menu, you need to first of all define a 4-digit PIN code as follows: ... 1. Select the PIN code option from the Parental control menu. Enter your code using the numeric buttons.The numbers are replaced by asterisks on screen. Enter PIN code. 2. Type your code in again to confirm it. Note: Choose a code that you can easily remember. You can now use the various parental control functions. Note: Once a parental control function is enabled, you need to enter your PIN code to access the Parental control menu. To amend your PIN code, select the PIN code option. Enter your new code using the numeric buttons.Type your code in again to confirm it. 14 IFC130-L_EN 4/08/05 17:23 Page 15 Advanced functions Locking a channel or AV programme 1. Select the Select channel option from the Parental control menu. Use the 01 BBC1 Parental control Return Select channel Lock channel Lock front panel Lock TIME Lock INSTALLATION PIN code or numeric buttons to select the channel to be locked. Use the press the AV button to access the AV programmes. buttons or 2. Check the box under the Lock channel option by pressing OK. Note: This function is only available if a code has been defined. ____ To unlock the channel or AV programme, go to the Parental control menu by entering your code, select the Lock channel option and uncheck the box by pressing OK. Press EXIT to close the menu. Define a PIN code by using the digit keys. EN Locking the buttons on the TV set Select the Lock front panel option from the Parental control menu and check the box by pressing OK. Notes: - This function is only available if a code has been defined. - The remote control is needed to be able to use the television. To cancel the lock, go to the Parental control menu by entering your code, select the Lock front panel option and uncheck the box by pressing OK. Press EXIT to close the menu. Locking the Time menu Select the Lock TIME option from the Parental control menu and check the box by pressing OK. Notes: - This function is only available if a code has been defined. - When this function is active you need to enter your PIN code to be able to access the Time menu. To cancel the lock function, enter your PIN code to access the Parental control menu, select the Lock TIME option and uncheck the box by pressing OK. Press EXIT to close the menu. Locking the Installation menu Select the Lock INSTALLATION option from the Parental control menu and check the box by pressing OK. Notes: - This function is only available if a code has been defined. - When this function is active you need to enter your PIN code to be able to access the Installation menu. To cancel the lock function, enter your PIN code to access the Parental control menu, select the Lock INSTALLATION option and uncheck the box by pressing OK. Press EXIT to close the menu. Operation (TV mode) To watch a channel or AV programme which is locked, try accessing it and follow the procedure on the screen.The lock will be applied again when you put the television in standby. In the list of programmes, channels and/or AV programmes which are temporarily unlocked are indicated by an open padlock. If you have forgotten your PIN code you can cancel it: Put your TV set into standby mode, then press the VOL ¦ button on the TV set and the EXIT button on the remote control simultaneously for five seconds.This procedure is possible, even if you have locked the buttons on the TV set. -