User manual GARMIN FORERUNNER 50 - QUICK START MANUAL REV. A, NOV, 2007

quick start manual FORERUNNER ® 50 with ANT+SportTM wireless technology Warning: This product contains a replaceable coin cell battery. See the Important Safety and Product Information guide in the product box for important battery safety information. Warning: Always consult your physician before you begin or modify any exercise program. See the Important Safety and Product Information guide in the product box for product warnings and other important information. Buttons view · Press and hold to turn the backlight on/off. · Press to scroll through the data pages in Train mode or History mode. · Press to confirm and advance to the next setting. mode · Press to change modes. · Press to exit a menu or page. · Press and hold to return to the Time page. lap/reset/- Icons Above high zone setting Below low zone setting Bike sensor active Foot pod sensor active Heart rate sensor active Data uploading Interval timer mode Alarm on Chime on Second time zone · Press to create a new lap. · Press and hold to save your workout in Train mode. · Press to decrease the value for settings. start/stop/+ · Press to start or stop the timer. · Press and hold to customize settings. · Press to increase the value for settings. Forerunner Backlight Press and hold view to turn on the backlight for 5 seconds. Extend the backlight for 5 more seconds by pressing any button. Step 1: Turn on Your Forerunner Press and hold start/stop to turn on your Forerunner. Your Forerunner ships with the power off to conserve the battery. 5. Continue this process to set seconds, month, day, year, and 12/24-hour mode. 6. Whenfinished,pressmode to resume Time mode. Step 2: Set the Time 1. On the Time page, press and hold start/stop until the hour setting blinks. Step 3: Set Up Sensors (Optional) 2. Use + and - to adjust the hour. TiP: Press and hold + or - to scroll quickly through the hours, minutes, and other Time mode settings. 3. Press view to advance to the minutes setting. 4. Use + and - to adjust the minutes. If your Forerunner included a heart rate monitor and foot pod, the ANT+SportTM sensors are already paired. Press mode until the Train page appears. The and icons appear on the Forerunner screen when the sensors are paired. Using the Heart Rate Monitor The heart rate monitor is on standby and ready to send data. Wear the heart rate monitor directly on your skin, just below your breastplate. It should be snug enough to stay in place during your run. 1. Push one tab on the strap through the slot in the heart rate monitor. Press the tab down. 2. Wet both sensors on the back of the heart rate monitor to create a strong connection between your chest and the transmitter. 3. Wrap the strap around your chest and attach it to the other side of the heart rate monitor. Tab noTe: The Garmin logo should be right-side up. 4. Bring the Forerunner within range (3 m) of the heart rate monitor. 5. Press mode to access Train mode. The heart rate icon appears on the Train page. 6. Press view to advance to the HEART data page. Heart Rate Monitor Strap Slot Heart Rate Monitor (Front) Sensors Heart Rate Monitor (Back) Using the Foot Pod The foot pod is on standby and ready to send data. When you install or move the foot pod, the LED blinks three times. 1. Press the tabs on the lace clip. Lift and separate the foot pod from the lace clip. 2. Loosen your shoe laces slightly. 3. Thread the lace clip through 2­3 secure sections of your shoelaces, allowing enough room at the top to tie the shoelaces. Lace clip 4. Tie your shoelaces securely to keep the foot pod in place during your workout. 5. Snap the foot pod into the lace clip. The foot pod must be pointed toward the front of your shoe. 6. Bring the Forerunner within range (3 m) of the foot pod. 7. Press mode to access Train mode. The foot pod icon appears on the Train page. 8. Press view to access the DIST, LAP, or SPEED/PACE data pages. Step 4: Go for a Run! In Train mode, press start to start the timer. After completing your run, press stop. Press and hold lap/reset to save your workout. Use + and - to toggle YeS or no. Press view to confirm. Step 6: Send Workout Data to Your Computer noTe: You must download software as instructed in Step 5 so that the necessary USB drivers are installed before connecting the USB ANT stick to your computer. Step 5: Download Free Software 1. Go to www.garmin.com/ forerunner. 2. Create a free myGarmin account. 3. Choose Garmin ConnectTM or Garmin Training Center® with Garmin ANT Agent. Click Download. 4. Follow the on-screen instructions. 1. Plug the USB ANT stick into an available USB port on your computer. 2. Bring your Forerunner within range (5 m) of your computer. 3. Follow the on-screen instructions. More Information For more information about the Forerunner functions and accessories, see the owner's manual at. www.garmin.com/forerunner. © 2007 Garmin Ltd. or its subsidiaries Garmin®, Garmin Training Center®, and Forerunner® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. Garmin ConnectTM, DynastreamTM, ANTTM, and ANT+SportTM are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin. Other trademarks and trade names are those of their respective owners. Garmin International, Inc., 1200 East 151st Street, Olathe, Kansas 66062, USA Tel. (913) 397.8200 or (800) 800.1020 Fax (913) 397.8282 Garmin (Europe) Ltd., Liberty House, Hounsdown Business Park, Southampton, Hampshire, SO40 9RB UK Tel. +44 (0) 870.8501241 (outside the UK) 0808 2380000 (within the UK) Fax +44 (0) 870.8501251 Garmin Corporation, No. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwan Tel. 886/2.2642.9199 Fax 886/2.2642.9099 For the latest product information and accessories, visit the Garmin Web site at www.garmin.com. November 2007 Part Number 190-00839-01 Rev. A Printed in Taiwan