User manual JWIN JD-TV108 - QUICK START

JD-TV108 PORTA B LE DVD P LAY ER Quick Guide · Before attempting to connect, operate or adjust this product, please save and read the Quick Guide completely. · The style of the product shown in the Quick Guide may be different from the actual unit due to various models. Playable Format: DVD/DVD R/DVD RW/Audio CD/Kodak Picture CD/JPEG Picture CD/MPEG 4/DviX JDTV108QGV10M10EN04072005 Getting to Know Your Portable DVD Player Welcome to the Portable DVD Player Quick Guide. This Guide will instruct you to identify and set up your Portable DVD Player in a quick and easy way. Please carefully follow the instructions. Top View Front View 1. 2. 3. 4. 5. 6. 7. 1. 2. 2. 8. 9. 10. 11. 3. 4. 5. 6. 1. 2. 3. 2 LCD Screen Speakers Power Indicator 4. 5. 6. Remote Sensor Remote Control Carrier Base 1. 2. 3. 4. 5. 6. VOLUME(-) Button CHANNEL(+) Button VOLUME(+) Button POWER Button PREVIOUS Button PLAY Button 7. NEXT Button 8. CHANNEL(-) Button 9. TV/DVD Button 10. EJECT Button 11. STOP Button PORTABLE DVD PLAYER USER GUIDE Getting to Know Your Portable DVD Player Right Side View Battery Installation for the Remote Control Insert the battery and match the (+) and (-) on battery to the marks inside the battery compartment. 1. 2. 3. 4. 5. First-time use: Remember to remove the insulating mylar strip from the battery. 6. 7. 8. 9. CR2025 1. 2. 3. 4. 5. P-SCAN Output Jack PHONES Jack AV OUT Jack AV IN Jack COAXIAL Output Jack 6. 7. 8. 9. USB Port SD/MMC Card Slot DC IN Jack CABLE IN (Ant.) Jack Service life of battery: 1. 2. 3. The battery in the Remote Control normally lasts for about one year, although this depends on how often and for what operations the Remote Control is used. If the remote control unit fails to work even when it is operated near the player, replace the battery. Use a 3V lithium battery (No. CR2025 or equivalent). 3 PORTABLE DVD PLAYER USER GUIDE + REAR OF REMOTE CONTROL OPEN PUSH Getting to Know Your Portable DVD Player Remote Control Remote Control Operation Range 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 1. Setup Button 2. Power Button 3. Subtitle Button 4. Zoom Button 5. Cursor Button ( ) 6. Menu Button 7. OK Button 8. Cursor Button ( ) 9. Cursor Button ( ) 10. Return Button 11. Pause Button 12. Play Button 13. Fast Forward Button 14. Fast Backward Button 15. LCD Button 16. Mode Button 17. Angle Button 18. Audio Button 19. Title Button 20. Volume(+) Button 21. Cursor Button ( ) 22. Volume(-) Button 23. Search Button 4 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Point the remote control unit no more than 6 meters (20 ft.) from the remote control sensor and within about 60° of the front of the unit. Remote Senser 30º 30 30. 31. 24. Mute Button 25. Stop Button 26. TV Source/Info. Button 27. Channel(-)/Previous Button 28. Channel(+)/Next Button 29. Program Button 30. Repeat Button 31. Number Buttons The operating distance may vary according to the brightness of the room. Note: Do not point bright lights at the remote control signal sensor (on the unit). Do not place objects between the remote control unit and the remote control signal sensor. Do not use this remote control unit while operating the remote control or the other equipment. · · · PORTABLE DVD PLAYER USER GUIDE Quick Operation Guide Connect to External Equipment 1. Connect the Portable DVD Player to Power. Please connect the supplied AC adapter to the DC IN jack on the right side of the unit. Green Blue Red Yellow White Red Y Pb Pr Input (Green) (Blue) (Red) Video Input (Yellow) Audio Input (White) (Red) Yellow White Red OR Audio Input (White) (Red) OR Orange 2. Connect it with earphones or connect it TO external equipment. If you want to enjoy a better listening and viewing quality, you can connect the Portable DVD Player to external equipment, such as a TV or an audio amplifier with speakers. Note: Before connecting, make sure to turn off the power on the Portable DVD Player and any external equipment. · · Note: Make sure the external equipment supports the audio/video inputs supplied by the JD-TV108. PORTABLE DVD PLAYER USER GUIDE 5 Quick Operation Guide 3. Press Power button on the top panel of the unit to turn on the DVD Player. POWER Input from External Equipment You could input images and sounds FROM external equipment by connecting the portable DVD player to external equipment with audio or video cables. AV IN 4. 5. Press Eject button on the top panel of the unit to open the disc cover. To widen the cover gap, pull the cover forward. Gently hold the edge of the disc, then put it in the disc frame with the printed side down. EJECT Yellow White Red Video Output (Yellow) Audio Output (White) (Red) White Red Audio Output OR (White) (Red) · Note: This player doesn't support the playback of 8cm (3.15") discs. · 6. 7. 6 Close the disc cover. Press Play button on the top panel of the unit or Play on the remote control to play the disc. PORTABLE DVD PLAYER USER GUIDE Note: Make sure the external equipment provides audio/video output jacks for connection, via cable, to the appropriate input connector on the JD-TV108. Viewing Angle and Handle Adjustment The viewing angle of this DVD Player can be adjusted by tilting the unit's body up to 15° back on its base. Thus, the adjustable viewing angle is between 0° and approximately 15°. 15 The handle can be raised for convenient carrying of the DVD player. · Caution: To avoid possible injuries and damage to the device, do not place your hands between the unit's body and its base, or press on the LCD screen while adjusting the angle. PORTABLE DVD PLAYER USER GUIDE 7 USB Flash Drive and SD/MMC Card Operation 1. You can insert a USB Flash Drive in the USB port or an SD/MMC card in the slot on the unit's right panel to experience its contents, which is typically photos or music. 2. Press Mode button on the remote control to select USB Mode or SD/MMC Card Mode. Note: Press Mode a number of times to toggle through different modes, which include "DVD Mode", "USB", "CARD", "AV IN" and "TV TUNER". Insert a USB Flash Drive · 3. Down on Up / A file list appears on the screen, press the remote control to select a preferred JPEG or MP3 file. 4. Press OK or Play to view the selected file. Insert a SD/MMC Card For Picture File Playback Only Right to rotate the picture clockwise by 90°. · Press Left to rotate the picture counter-clockwise by 90°. · Press Note: Playable formats for the USB Flash Drive and SD/MMC cards include JPEG and MP3. If the JPEG file size is over 1.0MB, it may take longer to read. · · 8 PORTABLE DVD PLAYER USER GUIDE TV Tuner Operation To receive TV signals, you can use the built-in telescoping antenna, an (external) outdoor antenna, cable feed, or satellite. Receiving TV Signal from Cable 1. Telescoping Antenna TV Signal Connect the RF cable from the outdoor antenna or cable TV provider, to the ANT. jack on the right side of the player. NTSC (National Television System Committee) and PAL (Phase Alternating Line) are two published standards that determine how video signals are transmitted, received, and processed in different parts of the world. The United States, Canada, and many countries in North and South America utilize NTSC. PAL is the video standard commonly found in Europe, Asia, and Australia (see next page). 1. Raise the Telescoping Antenna and place the unit in the best position to receive the strongest TV signal. Antenna Outdoor Antenna Telescoping Antenna PAL NTSC Your JD-TV108 is not capable of receiving PAL broadcasts or PAL cable transmissions, but it can play most PAL DVDs, were you ever to encounter them through foreign travel or exchange. Viewing a DVD recorded in the PAL format is subsequently discussed in this Quick Guide and in the User Manual. Your JD-TV108 is capable of playing all NTSC DVDs. Cable TV · Note: Before connecting the RF coaxial cable to the Antenna/Cable TV signal input (ANT.) jack of the DVD player, you will need an NTSC adapter (shown above). PORTABLE DVD PLAYER USER GUIDE 9 TV Tuner Operation Countries that use the NTSC Video Standard Canada, Japan, Korea, Panama, Taiwan, United States, Peru, Chile, Mexico, etc. · · How to Use theTV Tuner Make sure that the DVD Player is correctly connected. TV reception quality maybe different due to various areas. 1. Countries that use the PAL Video Standard PAL-B/G Australia, Denmark, Finland, Germany, Holland, Italy, Malaysia, New Zealand, Portugal, Spain, Singapore, Sweden, Switzerland, Thailand, etc. PAL-I/I Hong Kong, South Africa, Ireland, United Kingdom, etc. PAL-D/K Czech, China, Hungary, Poland, etc. Note: The -B/G, -I/I, and the -D/K designations are small variations within the PAL standard that apply to different countries. For all intents and purposes, these suffixes can be ignored. Press Power button on the top panel of the unit to turn on the DVD Player. Press Mode to select TV Tuner Mode. 2. · Note: Press Mode a number of times. You can toggle through different modes, including "DVD Mode", "USB", "CARD", "AV IN" and "TV TUNER". 3. 4. Press Press TV to select CABLE or ANTENNA as the TV source. Search, a TV tuner window appears on the screen. Channel 56 415.3MHz Freq Yes Favorite Auto search 5. Press Up / Down to highlight a preferred option. 10 PORTABLE DVD PLAYER USER GUIDE TV Tuner Operation 6. Press option. Left / Right to select a setting for the highlighted To Select Preferred Available Channels Channel Right to select the next channel or press · Press select the previous channel. 1. Left to · Channel+ to choose a preferred Channel- / Press (i.e. favorite) channel for viewing. Note: This function only works with available channels. If a channel is set "No" in the Favorite setting, the channel will be skipped when Channel+ to toggle through channels. Channel- / pressing Freq: Right to increase the frequency or press · Press decrease the frequency for the best tuning. · Left to Favorite: To Select a Specific Channel · Press Left / Right to select "Yes" or "No". "Yes" allows the channel to be included when the CH-/CH+ button is used. 1. Press Number Button(s) to specify the channel. Auto search: · Press Right and tuner search starts automatically and Note: allows the channel to be confirmed. · This function can be applied to all the channels, including those that are · · Note: After completing Auto Search, the DVD player will store all available TV channels. However, if more channels become available in your area, Auto Search may need to be conducted again to update the available channels. Each time Auto Search is run, all the previously stored channels will be erased and replaced. set to "No" in the Favorite setting. To Recall Between the Current Channel and the Previous Channel 1. 7. To leave the TV tuner window, press Search again. Repeat, and the previously selected channel can Press will be recalled. 11 PORTABLE DVD PLAYER USER GUIDE