User manual JWIN JD-VD755 - QUICK START

REMOTE CONTROL DIAGRAM REMOTE CONTROL OPERATION RANGE Point the remote control unit no more than 6 meters from the remote control sensor and within 600 of the front of the unit. remote sensor Portable DVD Player Quick Guide Welcome to the Portable DVD Player Quick Guide. Please carefully follow the instructions to set up your Portable DVD Player. Getting to Know Your Portable DVD Player FRONT VIEW DIAGRAM LCD screen 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 30 The operating distance may vary according to the brightness of the room. SETUP button INFO. button PAUSE/UP button MENU button F.REV/LEFT button PLAY/SEL. button PREVIOUS button STOP/DOWN button Number buttons MODE button 11. 12. 13. 14. 15. 16. 17. 18. 19. LCD button SUBTITLE button TITLE button ANGLE button F.FWD/RIGHT button AUDIO button NEXT button REPEAT 1/ALL button MUTE button Note: 1. Do not point bright lights at the remote control signal sensor. 2. Do not place objects between the remote control unit and the remote control signal sensor. 3. Do not use this remote control unit while simultaneously operating the remote control unit of any other equipment. SPEAKERS POWER indicator OPEN button PLAY button PAUSE button STOP button SPEAKERS Remote Sensor Using the Battery Pack "The shape of the following battery pack is only for reference; the actual shape may differ." BATTERY INSTALLATION FOR THE REMOTE CONTROL Insert the battery and match the (+) and (-) on battery to the marks inside the battery compartment. First-time use: + RIGHT SIDE DIAGRAM Battery release button DC IN jack Battery charge indicator Battery connectors Remember to remove the insulating Mylon piece from the battery. 1 1. 2. 3. 4. 5. 6. 7. 8. 2 3 4 5 6 78 CR2025 OPEN PUSH Volume Control Headphone jack Coaxial output jack Audio output jack Video output jack POWER Switch S-Video/P-Scan output jack DC IN jack Before using the battery pack, make sure to charge it. You could choose to charge the battery pack directly or charge it while attached to the portable DVD player. Service life of battery 1. The battery normally lasts for about one year although this depends on how often and for what operations the remote control is used. 2. If the remote control unit fails to work even when it is operated near the player, replace the battery. 3. Use a 3V lithium battery, No. CR2025. -1- + Battery Pack Information (Charge & Playback Time) Charge Time(hr) NiMH 3800mAh (6S1P) 3.5 DVD Playback Time(hr) 2.7 JD-VD755QGV10M10EN05162005 A. To charge the battery pack directly jack on the left side of the battery pack and a household power outlet as shown in figure (A). Quick Operation Guide STEP 1. Connecting to Power. (A) Please connect the supplied AC adaptor to the DC IN jack on the right side of the portable DVD 100Player. STEP 3. Open the display panel. (C) STEP 1. Connect the AC adapter (12V, 1.25A) to the DC IN (C) (A) DC IN jack (A) STEP 4. Slide the POWER switch to the ON position to turn on the DVD player. (D) STEP 2. The battery charge indicator will turn red and start STEP 3. When the battery pack is fully charged, the battery charge indicator will turn green. charging. (D) STEP 2. Connect it with earphones, or connect it to external equipment. (B) This unit can be connected to a television or home sound system. Note: Before connections, make sure to turn off the power of the portable DVD player and the external equipment. B. To charge the battery pack while attached to the portable DVD player connectors with the battery pack's battery connectors. Attach the battery pack to the portable DVD player as shown in figure (B). STEP 1. Please align the portable DVD player's battery STEP 5. Press to open the disc cover. (E) (B) (E) (B) Note: 1. Please turn the power off when attaching or removing the battery pack. 2. If you want to remove the battery pack, press the battery release button, then slowly remove it from the portable DVD player. STEP 6. Gently hold the edge of the disc, then put it in the center with the printed side up. (Red) (White) (Yellow) (Blue) (Red) (Green) 1 2 3 4 STEP 7. Close the disc cover. STEP 8. Press to play the disc. STEP 2. Connect the AC adapter (12V, 1.25A) to the DC IN jack on the right side of the portable DVD player and a household power outlet. charging. STEP 3. The battery charge indicator will turn red and start STEP 4. When the battery pack is fully charged, the battery charge indicator will turn green. Note: 1. The battery pack will not be charged while the portable DVD player is turned on. 2. Please use the specific power adapter (12V, 1.25A) to charge the battery pack. Note: Make sure the external equipment supports the audio/ video input feature. Back/front panel of external equipment 1 2 3 S-Video L (White) R (Red) TV TV Audio input 4 P-Scan TV Pb (Blue) Pr (Red) Y (Green) Video input S-Video input Video input -2-